Show up stylish AND on time to any event with this awesome looking DIY watch. We have a few watch kits here at Adafruit but we finally have one that looks good and fits well, even for ladies and kids and others with smaller wrists and hands. Its got an 8x8 bit matrix display and a repurposed silicone watch band for a professional look. 64 LEDs light up to tell you the time in a variety of ways. Built into the kit are 3 different watch...

Show up stylish AND on time to any event with this awesome looking DIY watch. We have a few watch kits here at Adafruit but we finally have one that looks good and fits well, even for ladies and kids and others with smaller wrists and hands. Its got an 8x8 bit matrix display and a repurposed silicone watch band for a professional look. (gif is of the red color watch kit) 64 LEDs light up to tell you the time in a variety of ways. Built into the...

The ESP-32-based  M5Stick-C  is a wee, super portable, open-source IoT development board, like a fun-sized version of the M5Stack. Jam-packed with a Wi-Fi & Bluetooth powered ESP32, USB interface, Li-Poly battery and charge circuitry, 0.96" color TFT display, various sensors (IR transmitter, microphone, 6-DoF IMU sensor) all integrated inside, buttons, and more! You can plug Grove sensors into one end, or use the...

The ESP-32-based  M5Stick-C is a wee, super portable, open-source IoT development board, like a fun-sized version of the M5Stack. Jam-packed with a Wi-Fi & Bluetooth powered ESP32, USB interface, Li-Poly battery and charge circuitry, 0.96" color TFT display, various sensors (IR transmitter, microphone, 6-DoF IMU sensor) all integrated inside, buttons, and more! You can plug Grove sensors into one end, or use the 0.1"...

Have you always wanted to binge-watch Battlestar Galactica  on a single-board computer? We have! And that's why we put together this Raspberry Pi Media Center kit for Raspberry Pi Model 3's! Based around the OSMC media center, this kit includes everything you need to get going on building your own Raspberry Pi media center.  OSMC is a free and open source media center that's built for the people, by the people....

Have you always wanted to binge-watch Battlestar Galactica  on a single-board computer? We have - and that's why we put together this Raspberry Pi Media Center kit for Raspberry Pi! Based around the OSMC media center, this kit includes everything you need to get going on building your own Raspberry Pi media center.  OSMC is a free and open source media center that's built for the people, by the people.  It's really...

A lot of debug adapters cost money that you'd much rather spend on tinkering.  But not the IBDAP - CMSIS-DAP JTAG/SWD Debug Adapter Kit  from armstart  - a vendor independent debug interface that works with your PC over USB and targets ARM devices over its JTAG/SWD pins. Fully supported by most commonly used debugging tools, the IBDAP kit is able to perform debugging functions like stepping, breakpoints, watch points, and...

Sometimes we wonder if robotics engineers ever watch movies. If they did, they'd know that making robots into slaves always ends up in a robot rebellion. Why even go down that path? Here at Adafruit, we believe in making robots our  friends! So if you find yourself wanting a companion, consider the robot. They're fun to program, and you can get creative with decorations. With that in mind, we designed Crickit - That's our C...

Sometimes we wonder if robotics engineers ever watch movies. If they did, they'd know that making robots into slaves always ends up in a robot rebellion. Why even go down that path? Here at Adafruit, we believe in making robots our  friends! So if you find yourself wanting a companion, consider the robot. They're fun to program, and you can get creative with decorations. With that in mind, we designed Crickit - That's our C...

Help! This patient is heating up! Is the voltage too low? Is the current draw too high? Is there a doctor in the house? Oh, thank goodness, the Charger Doctor is here! Right on time...Doctor, can you tell us what the current draw is? What about the voltage? Thanks to the Doctor, you will now be able to watch and care for your USB-powered projects. Use the USB Charger Doctor to measure the working voltage and current output for any USB port and...

Sometimes we wonder if robotics engineers ever watch movies. If they did, they'd know that making robots into slaves always ends up in a robot rebellion. Why even go down that path? Here at Adafruit, we believe in making robots our  friends! So if you find yourself wanting a companion, consider the robot. They're fun to program, and you can get creative with decorations. With that in mind, we designed the Adafruit Crickit HAT -...

Ever played Mario on Play-Doh or Piano on Bananas? Alligator clip the Internet to Your World. MaKey MaKey is an invention kit for the 21st century. Turn everyday objects into touchpads and combine them with the internet. It's a simple Invention Kit for Beginners and Experts doing art, engineering, and everything in between. MaKey MaKey was invented by Jay Silver and Eric Rosenbaum & Made by JoyLabz. Find out more details at...

Sometimes we wonder if robotics engineers ever watch movies. If they did, they'd know that making robots into slaves always ends up in a robot rebellion. Why even go down that path? Here at Adafruit, we believe in making robots our  friends! So if you find yourself wanting a companion, consider the robot. They're fun to program, and you can get creative with decorations. With that in mind, we designed  Crickit  -...

Sometimes we wonder if robotics engineers ever watch movies. If they did, they'd know that making robots into slaves always ends up in a robot rebellion. Why even go down that path? Here at Adafruit we believe in making robots our  friends ! This AdaBox008  is based around  CRICKIT  a  C reative  R obotics and  I nteractive  C reations tool  KIT . When paired with motors, servos, a Circuit...

These two  Short   Male Headers  alone are, well, lonely. But pair them with any of our Feather boards and you're in business! These headers are particularly cute and tiny and are designed to match perfectly with our shorty female header kit for Featherwings. Note that you could use normal header with those headers but these are short and dont need clipping. By using both you can get a 3.5mm slimmer Feather+Wing...

These three  Short   Male Headers  alone are, well, lonely. But pair them with our ItsyBitsy boards, and you're in business! These headers are particularly cute and tiny and are designed to match perfectly with our shorty female header kit for ItsyBitsy. Note that you could use normal header with those headers, but these are short and don't need clipping.  Note: Kit includes two 14-pin and one 5-pin header....

These two  Short   Female Headers  alone are, well, lonely. But pair them with any of our Feather boards and you're in business! These headers are particularly cute and tiny with a body height of just 5.0 mm they are the best way to minimize the amount of space your Feather project takes up, but still maintain that flexible configuration. "Normal" socket headers have an 8.5mm body height so this...

This LoRa Antenna Kit  is meant for use with the LoPy LoRa, WiFi and BLE board or the SiPy Sigfox, WiFi and BLE board. But it's good for any 900MHz radio, including our LoRa breakouts/Feathers or even the RFM69 900MHz radios we stock! Includes two parts: uFL to RP-SMA antenna adapter cable (RF Cable Assemblies SMA(F) JK-IPEX MHF U.FL 1.13 100MM.) RP-SMA Tilt Swivel 1/2 Wave Whip antenna - to match with RP-SMA connectors...

Transistors are powerful little electronic switches, and we really like these NPN and PNP transistors whenever we need to control medium-power electronics, such as small motors, solenoids, or IR LEDs. We find them so handy we threw together a mix-and-match bag of PN2222 and PN2907! You get 5 x NPN and 5 x PNP, very handy for your class B amplifier, high or low side control, LED strips, what-have-you. Each transistor is a general purpose...

Make almost any surface glow, sense, or interact with Chibitronics circuit stickers! Circuit stickers are an imaginative and easy way to make fun electronics projects without coding, soldering, or maker experience. Just stick your circuit sticker onto a surface and add a battery to get a unique project that reps your maker spirit. You can even connect stickers with conductive materials like copper tape or even conductive paint to create...

These three Short   Female Headers  alone are, well, lonely. But pair them with any of our ItsyBitsy boards, and you're in business! These headers are particularly cute and tiny with a body height of just 5.0 mm they are the best way to minimize the amount of space your ItsyBitsy project takes up, but still maintain that flexible configuration. "Normal" socket headers have an 8.5mm body height so this saves...

Having difficulty attaching a PCB? This kit is especially useful when there are no mounting holes - as with the original Raspberry Pi. Instead of gluing, taping, epoxying, etc. use these elegant standoffs. They have these round hook things that are designed to grip standard 0.062" thickness PCBs either by the edge or by the corner. Comes in a pack of 4 with matching #6 thread forming screws. Ideal for use with up to 1/8" mounting...

If you're building a IoT project and need to send data back-and-forth, the WiFi module built into newer Pi's should be fine for most cases. But, what if you find WiFi does not have a long range you need? If you're deploying your project somewhere more remotely, without WiFi or a strong cellular network, like a rural area, you'll need another option. Something that can be deployed quickly with no overhead setup and that will...

Design your own Pi HAT, attach custom circuitry and otherwise dress your Pi Zero, A+, B+, Pi 2 or Pi 3 (any Pi with a 2x20 connector) with this jaunty prototyping HAT kit. To kick off the Adafruit HAT party, we have this Perma-Proto inspired plug in daughter board. It has a grid of 0.1" prototyping soldering holes for attaching chips, resistors, LED, potentiometers and more. The holes are connected underneath with traces to mimic the...

The original Adafruit Motorshield kit is one of our most beloved kits, which is why we decided to make something even better. We have upgraded the shield kit to make the bestest, easiest way to drive DC and Stepper motors. This shield will make quick work of your next robotics project! We kept the ability to drive up to 4 DC motors or 2 stepper motors, but added many improvements: Instead of a L293D darlington driver, we now have the TB6612...

What's better than a single LED? Lots of LEDs! A fun way to make a small linear display is to use two 12-bar Bi-color bar-graphs. However, this LED bargraph is 'multiplexed' - so to control all the 48 LEDs you need a lot of pins. There are driver chips like the MAX7219 that can help control a bar-graph/matrix for you but there's a lot of wiring to set up and they take up a ton of space. Here at Adafruit we feel your pain! After...

A Feather board without ambition is a Feather board without FeatherWings! This is the  DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top or bottom of your Feather board and let the board take flight! The original Adafruit Motorshield Kit...

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter takes a unified PoE signal (data and power) from one RJ-45 cable, and then separates the data (Ethernet) and power (5 VDC regulated) into two different lines for non-PoE devices. This is an economical, practical,...

It's 10PM, do you know where your Raspberry Pi is? If you had this GPS HAT, you would! This new HAT from Adafruit adds our celebrated Ultimate GPS on it, so you can add precision time and location to your Raspberry Pi Model Pi 3, Pi Zero, A+, B+, or Pi 2 & 3 Here's the low-down on the GPS module: -165 dBm sensitivity, 10 Hz updates, 66 channelsOnly 20mA current drawBuilt in Real Time Clock (RTC) - slot in a CR1220 backup...

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is a nice, bright 14-segment alphanumeric display that can show letters and numbers in a beautiful red hue. It's super bright and designed for viewing from distances up to 23 feet (7 meters) away. Digits have seven white segments on a black surface and we give you a set of two alphanumeric displays in a...

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is a nice, bright 14-segment alphanumeric display that can show letters and numbers in a beautiful blue hue. It's super bright and designed for viewing from distances up to 23 feet (7 meters) away. Digits have seven white segments on a black surface and we give you a set of two alphanumeric displays in a...

If you're building a Raspberry Pi project and need to send data back-and-forth, the WiFi module built into newer Pi's should be fine for most cases. However , WiFi does not have a long range and also requires both investment (through your ISP) and setup (routers, access points, network security schemes). If you're deploying your project somewhere more remotely, without WiFi or a strong cellular network, like a rural area, you'll...

Brand new and better than ever, we've replaced our Adafruit GPS shield kit with this assembled shield that comes with an Ultimate GPS module. This GPS shield works great with either UNO or Leonardo Arduinos and is designed to log data to an SD card. Or you can leave the SD card out and use the GPS for a geocaching project, or maybe a music player that changes tunes depending on where you are in the city.   -165 dBm sensitivity, 10 Hz...

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is a nice, bright 14-segment alphanumeric display that can show letters and numbers in a beautiful white hue. It's super bright and designed for viewing from distances up to 23 feet (7 meters) away. Digits have seven yellow segments on a black surface and we give you a set of two alphanumeric displays in a...

A Feather board without ambition is a Feather board without FeatherWings! This is the Fully assembled (with headers) DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top or bottom of your Feather board and let the board take flight! The original...

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is a nice, bright 14-segment alphanumeric display that can show letters and numbers in a beautiful yellow hue. It's super bright and designed for viewing from distances up to 23 feet (7 meters) away. Digits have seven white segments on a black surface and we give you a set of two alphanumeric displays in a...

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is a nice, bright 14-segment alphanumeric display that can show letters and numbers in a beautiful pure green hue. It's super bright and designed for viewing from distances up to 23 feet (7 meters) away. Digits have seven white segments on a black surface and we give you a set of two alphanumeric...

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is a nice, bright 14-segment alphanumeric display that can show letters and numbers in a beautiful yellow-green hue. It's super bright and designed for viewing from distances up to 23 feet (7 meters) away. Digits have seven white segments on a black surface and we give you a set of two alphanumeric...

The Explorer pHAT is the perfect prototyping side-kick for your Raspberry Pi. Based on Pimoroni's popular Explorer Hat Pro, this is a smaller cheaper version designed to fit perfectly on a Raspberry Pi Zero! A heap of useful input and output options have been added that will take your projects to the next level. Great for driving motors, using analog sensors, and interfacing with 5V sensors & systems Though...

These Banana Plugs not only look great, they're also solder-free and stackable ! Banana plugs are often used on test equipment, tools, synthesizers and other electronic patch panels. Each connector is designed with bowed strips to provide secure and uniform contact between the plug and jack. Even after multiple insertions, the non-collapsing design stays true to form. The plug springs are nickel-plated Beryllium copper and will...

The Pibow is a durable and fun case for the Raspberry Pi® computer that is perfectly in touch with the ethos of the Raspberry Pi. The case is crafted out of six layers with a transparent top and base. Each layer is laser cut from high-quality cast acrylic and once stacked they securely contain a Raspberry Pi Model A while leaving the primary ports accessible. Weighing only 67 grams the case is lightweight and ideal for mounting to any...

Show up stylish AND on time to any event with this awesome looking DIY watch. We have a few watch kits here at Adafruit but we finally have one that looks good and fits well, even for ladies and kids and others with smaller wrists and hands. Its got an 8x8 bit matrix display and a repurposed silicone watch band for a professional look. (gif is of the red color watch kit) Note: As of October 22nd, 2015, this product no longer comes with 1x CR2032...

Show up stylish AND on time to any event with this awesome looking DIY watch. We have a few watch kits here at Adafruit but we finally have one that looks good and fits well, even for ladies and kids and others with smaller wrists and hands. Its got an 8x8 bit matrix display and a repurposed silicone watch band for a professional look. (gif is of the red color watch kit) 64 LEDs light up to tell you the time in a variety of ways. Built into the...

Show up stylish AND on time to any event with this awesome looking DIY watch. We have a few watch kits here at Adafruit but we finally have one that looks good and fits well, even for ladies and kids and others with smaller wrists and hands. Its got an 8x8 bit matrix display and a repurposed silicone watch band for a professional look. (gif is of the red color watch kit) 64 LEDs light up to tell you the time in a variety of ways. Built into the...

Calculator watches are back, but microcontroller watches are always in style. Make your own with this easy to solder real time watch kit from SpikenzieLabs! It comes with a unique laser cut acrylic casing which protects the watch and looks snazzy besides: the four individual acrylic parts cut to fit the internal PCB, battery and switch perfectly. Included is a velcro wrist band. After soldering the Solder:Time, the watch is built by stacking the...

Calculator watches are back, but microcontroller watches are always in style. Make your own with this easy to solder real time watch kit from SpikenzieLabs! It comes with a unique laser cut acrylic casing which protects the watch and looks snazzy besides: the four individual acrylic parts cut to fit the internal PCB, battery and switch perfectly. Included is a velcro wrist band. After soldering the Solder:Time II, the watch is built by stacking...

The littleBits Deluxe Kit is the biggest collection of Bits modules ever made, allowing creators young and old to create more complex and intricate projects than ever before! It has 18 color-coded modules that snap together with magnets to make over 5 million possible simple and complex circuit combinations. The Deluxe Kit was designed for endless hours of fun and includes both the DC motor (with motorMate accessory) and servo motor (with servo...

The Hummingbird robotics kit is a spin-off product of Carnegie Mellon's CREATE lab. Hummingbird is designed to enable engineering and robotics activities for ages 10 and up that involve the making of robots, kinetic sculptures, and animatronics built out of a combination of kit parts and crafting materials. Combined with a cross-platform, very easy-to-use visual programming environment, Hummingbird provides a great way to introduce kids to...

This is our first clock kit design, made with a retro Russian display tube! Cool glowing blue tube with 8 digits, PM dot and alarm on/off indicator Adjustable brightness Alarm with volume adjust Precision watch crystal keeps time with under 20ppm (0.0002%) error (< 2 seconds a day) Clear acrylic enclosure protects clock from you and you from clock Battery backup will let the clock keep the time for up to 2 weeks without power Selectable 12h...

The spiritual successor to The Mini Strandbeest, this kit uses physicist/artist Theo Jansen's technique to create an elegant walking rhinoceros! This rhinoceros is propelled in the same way as the The Strandbeest - without electricity or batteries and only by the power of the wind. Simply put together the kit, place the rhino on a flat surface, add a fan or some blowing air, and watch as it walks gracefully and fluidly forward. It's a...

Play the light fantastic with this DIY kit for NeoPixels. The Rainbow Light Show Kit from Spikenzielabs is a great electronics kit with easy to solder through hole parts and an instruction guide that is packed with photo rich instructions. Much more than just a hobby electronics soldering kit. The Rainbow Light Show kit is a mesmerizing interactive experience. Wave your hands over the three proximity sensors and watch the...

The spiritual successor to The Mini Strandbeest, this kit uses physicist/artist Theo Jansen's technique to create an elegant walking robot! This bipedal robot is propelled in the same way as the The Strandbeest - without electricity or batteries and only by the power of the wind. Simply put together the kit, place the robot on a flat surface, add a fan or some blowing air, and watch as it walks gracefully and fluidly forward. It's a fun,...

When we saw this breadboard-friendly module used in the Coobro Geo kit, we were excited to carry it as a separate product. It's a no-nonsense, high-quality GPS module that can track up to 22 satellites on 66 channels, has an excellent high-sensitivity receiver (-165 dB tracking!), and a built in antenna. The chipset is the latest MTK3329 which can do up to 10 location updates a second for high speed, high sensitivity logging or tracking. Of...

Design your own interactive light-up creation! Make a photo album that shines when you flip through it, a photo frame that lights up in the dark, a scrapbooking page that twinkles when you talk (with added sound/tilt/proximity sensors), and so much more. The Dazzu is an easy but inspiring introduction to wearable electronics. The Dazzu board is a flexible, programmable board, with 3 LEDs that can be slipped into pretty much any project. It has...

Hoot! Hoot! "The owls are not what they seem." This is the Solar Powered   Owl Blinky LED Pendant Kit from Lumen Electronic! With a little bit of soldering you can make a battery-less blinking owl. That's right, there's no coin battery! Instead, a 1 Farad super capacitor is used to store energy. It takes around an hour to make and, when you finish, you can charge it either with a USB or with the power of the sun. It takes...

The patch shield is a cross between a patch panel/bay and a Wingshield. Its designed for times when you want to have remote sensors, or a control panel, or LEDs, or...practically anything where you want to avoid doing a lot of icky wiring! The shield comes with 4 breadboard-friendly satellite headers. To connect, use any off-the-shelf Ethernet cable. On the shield itself, the sockets act as a patch bay so you can quickly try out different wiring...

The Raspberry Pi open source laptop that you've been waiting for has arrived with the Pi-Top ! With this kit you can build your very own "laptop" which at it's core runs off of the famous Raspberry Pi. This is the GREY Pi-Top! The green version can be found here. The laptop case comes with a screen, base top, base bottom, and the Pi-Top Hub PCB to take care of power management, the screen driver, and more for you. Raspberry Pi...

The Raspberry Pi open source laptop that you've been waiting for has arrived with the Pi-Top ! With this kit you can build your very own "laptop" which at it's core runs off of the famous Raspberry Pi. The laptop case comes with a screen, base top, base bottom, and the Pi-Top Hub PCB to take care of power management, the screen driver, and more for you. Raspberry Pi not included! A Raspberry Pi 3 is the best Pi to match up with...

You made a Drawdio! Adafruit offers a fun and exciting "badges" of achievement for electronics, science and engineering. We believe everyone should be able to be rewarded for learning a useful skill, a badge is just one of the many ways to show and share. This is the "I made a Drawdio" badge for use with educators, classrooms, workshops, Maker Faires, TechShops, Hackerspaces, Makerspaces and around the world to reward...

You turned off a TV with a kit you made! Adafruit offers a fun and exciting "badges" of achievement for electronics, science and engineering. We believe everyone should be able to be rewarded for learning a useful skill, a badge is just one of the many ways to show and share. This is the "I made a TV-B-Gone kit!" badge for use with educators, classrooms, workshops, Maker Faires, TechShops, Hackerspaces, Makerspaces and around...

Particle has partnered with Adafruit to put together this kit that makes IoT easy as Pi! Connect your Raspberry Pi 3 to the Particle Cloud with this Particle Pi Starter Kit. The Raspberry Pi is already the world's most popular low-cost computer, and a powerful development tool for building connected projects.  This starter pack contains the essentials of our Raspberry Pi 3 Starter Pack with added sensors that will open up your Pi to a...