Search Results for "solder"

It can be tricky to work out which pin is which when the Raspberry Pi Pico is attached to solderless breadboard. Luckily, the MonkMakes Breadboard for Pico solves this problem by labeling the Pico pins on the breadboard. This cute 3.2″ × 2.1″ (82 × 53mm) solderless half-size breadboard has four bus lines and 30 rows of pins, our favorite size...

Strangely enough, that's the technical term for this desoldering vacuum tool. Useful in cleaning up mistakes, every electrical engineer has one of these on their desk. To use, depress the end to engage the vacuum. Then heat up the to-be-desoldered joint until it is liquid. With your other hand hold the plastic tip as close as possible to the joint and depress the...

Used along with the solder sucker to clean up soldering messes. Wick really comes in handy when soldering or desoldering surface-mount parts. Even if you don't have the best iron for SMT work, a bit of wick will fix it up. 1.5mm wick, and 1.5m long, so you have plenty to work with.

If you want to make a kit you'll need some solder. This 0.1 lb (about 50 grams) spool is a good amount, not too much (like 1 lb spools) and not too little (like those little 'pocket clip' vials). This spool of solder contains approximately 0.6mm / .02" diameter in with lead-tin formulation. This is not lead-free solder, so not for lead-free/RoHS shops. However, for...

A real stand with sponge and solidly-built sheet metal holder prevents your iron from 'rolling away' or burning a hole in the table. If you're starting out and have a 'pen type' soldering iron, this is essential for your safety. Comes with a sponge, too! Soldering iron not included, but we have it in the store!

This portable, minimalist solder wire stand is so handy, we had to carry it in the shop. It comes as a solid metal frame that's not too heavy and (best of all) a solder roll holder that keeps your wire from getting tangled! The roll holder can support up to 1kg of solder wire. Doesn't include a soldering iron or solder! We also carry a solder stand that holds both...

If you want to make a kit you'll need some solder. This 0.1lb / 50g spool is a good amount, not too much (like 1 lb spools) and not too little (like those little 'pocket clip' vials). This spool of solder contains approximately 0.5mm / .02" diameter in standard SAC305 formulation. This is lead-free solder, so great for lead-free/RoHS shops. For flux, it contains a...

Used along with the solder sucker to clean up soldering messes. Wick really comes in handy when soldering or desoldering surface-mount parts. Even if you don't have the best iron for SMT work, a bit of wick will fix it up. This is thinner, SMT-friendly 0.8mm wick, and 1.5m long, so you have plenty to work with. We also carry solder wick with 1.5mm width (try saying...

If you want to make a kit you'll need some solder. This 0.1lb / 50g spool is a good amount, not too much (like 1 lb spools) and not too little (like those little 'pocket clip' vials). This spool of solder is the less expensive version of our popular SAC305 RoHS solder. This is lead-free solder, so great for lead-free shops, however, it's not SAC305, a formulation...

These ingenious little clips make it easier than ever to use our analog RGB LED strips - no need to solder! The clips snap onto the ends of the LED strip and hold securely. They're not waterproof but you could cover them in heat-shrink to make them weatherproof. You get one piece of three different types: One is a short "joiner" - it can join two strips together. The...