Search Results For: oled

... in the Adafruit Blog

... in the Adafruit Customer Support Forums

PRODUCTS:

Color OLED with color bars test pattern.

OLED Breakout Board - 16-bit Color 1.5" w/microSD holder

Product ID: 1431

We love our black and white monochrome displays but we also like to dabble with some color now and then. Our big 1.5" color OLED displays are perfect when you need a small display with vivid, high-contrast 16-bit color. The visible portion of the OLED measures 1.5" diagonal and contains 128x128 RGB pixels, each one made of red, green and blue OLEDs. Each pixel can be...

Notify Me

$39.95

Out of stock

Notify Me

16-bit Color 1.27" Color OLED with color bars test pattern

OLED Breakout Board - 16-bit Color 1.27" w/microSD holder

Product ID: 1673

We love our black and white monochrome displays but we also like to dabble with some color now and then. Our 1.27" color OLED displays are perfect when you need a small display with vivid, high-contrast 16-bit color. The visible portion of the OLED measures 1.27" diagonal and contains 128x96 RGB pixels, each one made of red, green and blue OLEDs. Each pixel can be...

$34.95

44 in stock

16-bit Color 0.96" Color OLED with color bars test pattern

OLED Breakout Board - 16-bit Color 0.96" w/microSD holder

Product ID: 684

We love our black and white monochrome displays but we also like to dabble with some color now and then. Our new 0.96" color OLED displays are perfect when you need an ultra-small display with vivid, high-contrast 16-bit color. The visible portion of the OLED measures 0.96" diagonal and contains 96x64 RGB pixels, each one made of red, green and blue OLEDs. Each pixel...

$29.95

96 in stock

Angled shot of a OLED Bonnet Pack for Raspberry Pi Zero.

OLED Bonnet Pack for Raspberry Pi Zero - Includes Pi Zero W

Product ID: 3192

The OLED Bonnet Pack for Raspberry Pi Zero sets you up with the Pi Zero W, and our popular 128x64 OLED Bonnet. It's the big sister to our mini PiOLED add-on. This version has 128x64 pixels (instead of 128x32) and a much larger screen. With the OLED display in the center, we had some space on either side so we added a 5-way joystick and two pushbuttons. The OLED...

Notify Me

$34.95

Out of stock

Notify Me

Adafruit FeatherWing OLED - 128x64 OLED Add-on For Feather - STEMMA QT / Qwiic

Product ID: 4650

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing 128x64 OLED: it adds a gorgeous 128x64 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight! These displays are...

$14.95

In stock

Adafruit FeatherWing OLED - 128x32 OLED Add-on For Feather

Product ID: 2900

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight! These displays are small, only...

$14.95

In stock

Adafruit 128x64 OLED Bonnet for Raspberry Pi

Product ID: 3531

If you'd like a compact display, with buttons and a joystick - we've got what you're looking for. The Adafruit 128x64 OLED Bonnet for Raspberry Pi is the big sister to our mini PiOLED add-on. This version has 128x64 pixels (instead of 128x32) and a much larger screen besides. With the OLED display in the center, we had some space on either side so we added a 5-way...

$22.50

In stock

Wired up 16x2 OLED with blue on black text "Hello World! Adafruit <3 OLED"

Blue Character OLED 16x2

Product ID: 823

When you need low power, ultra-high contrast and any-angle readability, you can't beat these great looking character OLEDs. They are pin/shape compatible with 'standard' HD44780 LCDs. The code is slightly different (they're more timing sensitive) so we have our own Arduino library that plays better with the OLEDs than the standard LiquidCrystal library. Best of all,...

More Info

Discontinued

More Info

Top down view of a Adafruit FeatherWing OLED - 128x32 OLED Add-on For Feather.

Adafruit FeatherWing OLED - 128x32 OLED Add-on For Feather - With or Without Headers

Product ID: 4091

More Info

In stock

More Info

Assembled Adafruit FeatherWing OLED - 128x32 OLED Add-on For Feather

Product ID: 3045

A Feather board without ambition is a Feather board without FeatherWings! This is the Assembled FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Comes fully assembled so you can connect a FeatherWing on top of your Feather board and let the board take flight, no soldering required! These displays are small, only about...

$15.95

In stock

Monochrome 0.91" SPI OLED module with white text

Monochrome 128x32 SPI OLED graphic display

Product ID: 661

These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x32 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has...

$17.50

In stock

Monochrome 0.91" I2C OLED module with white text

Monochrome 128x32 I2C OLED graphic display

Product ID: 931

More Info

Discontinued

More Info

Top view of assembled and powered on Adafruit PiOLED - 128x32 Monochrome OLED on a Pi Zero. The OLED displays a data readout.

Adafruit PiOLED - 128x32 Monochrome OLED Add-on for Raspberry Pi

Product ID: 3527

If you're looking for the most compact li'l display for a Raspberry Pi (most likely a Pi Zero) project, this might be just the thing you need! The Adafruit 128x32 PiOLED is your little OLED pal, ready to snap onto any and all Raspberry Pi computers, to give you a little display. The PiOLED comes with a monochrome 128x32 OLED, with sharp white pixels. The OLED uses...

$14.95 $7.99

In stock

USB Voltage Meter with OLED Display

Product ID: 2690

This USB In-Line Voltage and Current Meter with OLED Display is a lot like the Charger Doctor we carry - if the doctor was a talented surgeon who just lost her medical license and has nothing to lose. Just like the charger doctor, you can use this meter to find out if your voltage is too low or your current draw is too high. Use the USB In-Line Voltage and Current...

$19.95

In stock

Top down view of 4 Adafruit Radio Bonnets with OLED.

Adafruit Radio Bonnets with OLED - RFM69 or LoRa - RadioFruit

Product ID: 4087

The latest Raspberry Pi computers come with WiFi and Bluetooth, and now you can add even more radio options with the Adafruit Radio Bonnets! Upgrade your Raspberry Pi with an RFM69 or LoRa / LoRaWAN radio, so it can communicate over very long distances. These bonnets plug right into your Pi and give you long range wireless capabilities to remote nodes that may be...

More Info

In stock

More Info

Monochrome 1.3" 128x64 OLED graphic display - STEMMA QT / Qwiic

Product ID: 938

These displays are small, only about 1.3" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display...

$19.95

In stock

Monochrome 0.96" 128x64 OLED Graphic Display - STEMMA QT

Product ID: 326

These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has...

$17.50

In stock

Adafruit LoRa Radio Bonnet with OLED - RFM95W @ 915MHz - RadioFruit

Product ID: 4074

The latest Raspberry Pi computers come with WiFi and Bluetooth, and now you can add even more radio options with the Adafruit Radio Bonnets! Upgrade your Raspberry Pi with a LoRa / LoRaWAN radio, so it can communicate over very long distances. These bonnets plug right into your Pi and give you long range wireless capabilities to remote nodes that may be battery...

$32.50

In stock

Monochrome 2.42" 128x64 OLED Graphic Display Module Kit

Product ID: 2719

If you've been diggin' our monochrome OLEDs but need something bigger, this display will delight you! These displays are 2.42" diagonal, and very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one turned on or off by the controller chip. Because the display makes its own light, no backlight is...

$39.95

In stock

Adafruit 2.23" Monochrome OLED Bonnet for Raspberry Pi

Product ID: 4567

If you're looking for a bright, readable OLED display for a Raspberry Pi (most likely a Pi Zero) project, this might be just the thing you need! The Adafruit 2.23" Monochrome OLED Bonnet for Raspberry Pi is your chonky OLED pal, ready to snap onto any and all Raspberry Pi computers, to give you a vivid display. The Bonnet comes with a 2.13" diagonal monochrome 128x32...

$22.50

83 in stock

Monochrome OLED Graphic Display Module showing blue text

Monochrome 2.3" 128x32 OLED Graphic Display Module Kit

Product ID: 2675

If you've been diggin' our monochome OLEDs but need something bigger, this display will delight you. These displays are 2.3" diagonal, and very readable due to the high contrast of an OLED display. This display is made of 128x32 individual blue OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is...

$39.95

27 in stock

Monochrome 2.7 128x64 OLED Graphic Display Module showing white text

Monochrome 2.7" 128x64 OLED Graphic Display Module Kit

Product ID: 2674

If you've been diggin' our monochome OLEDs but need something bigger, this display will delight you. These displays are 2.7" diagonal, and very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is...

$49.95

In stock

Monochrome 1.54" 128x64 OLED Graphic Display Module Kit

Product ID: 2720

Discontinued - you can grab Monochrome 1.3" 128x64 OLED graphic display - STEMMA QT / Qwiic instead! If you've been diggin' our monochrome OLEDs but need something bigger, this display will delight you! These displays are 1.54" diagonal, and very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each...

More Info

Discontinued

More Info

Monochrome 0.91" 128x32 I2C OLED Display - STEMMA QT / Qwiic

Product ID: 4440

$12.50

In stock

Adafruit Grayscale 1.5" 128x128 OLED Graphic Display - STEMMA QT / Qwiic

Product ID: 4741

This OLED goes out to all the fans who want more pixels! Normally our 128x64 OLEDs are the biggest ones we've stocked that can use I2C. This one is a whopping 128x128 pixels and it even has an extra bonus - it can do grayscale pixels! Yep, you get the same crispness of a monochrome OLED but with 16 levels of grayscale. This display is a petite 1.5" diagonal, but very...

$22.50

In stock

Angled shot of black OLED display breakout board.

Adafruit Monochrome 1.12" 128x128 OLED Graphic Display - STEMMA QT / Qwiic

Product ID: 5297

This OLED goes out to all the fans who want more pixels in a smaller size! Normally our 128x64 OLEDs are the biggest ones we've stocked that can use I2C. This one is a whopping 128x128 pixels in crisp monochrome. This display is a petite 1.12" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x128 individual white...

$17.50

In stock

Angled shot of 1.3" OLED display module.

Monochrome 1.3" 128x64 SH1106G SPI OLED Monochrome Display

Product ID: 5228

This is a screen for advanced hackers who like the look of the OLED screen we've put into the Adafruit MACROPAD RP2040. This is just the raw display module - no PCB or supporting circuitry is included! You'll need to add a 12V boost converter and other components to make it work. Check out the MACROPAD PCB files for a place to start. We're selling this module bare...

$6.50

67 in stock

Adafruit MACROPAD RP2040 Bare Bones - 3x4 Keys + Encoder + OLED

Product ID: 5100

Strap yourself in, we're launching in T-minus 10 seconds...Destination? A new Class M planet called MACROPAD! M here, stands for Microcontroller because this 3x4 keyboard controller features the newest technology from the Raspberry Pi sector: say hello to the RP2040. It's a speedy little microcontroller with lots of GPIO pins and 64 times more RAM than the Apollo...

Notify Me

$34.95

Out of stock

Notify Me

Adafruit MacroPad RP2040 Starter Kit - 3x4 Keys + Encoder + OLED - ADABOX019 Essentials

Product ID: 5128

Strap yourself in, we're launching in T-minus 10 seconds...Destination? A new Class M planet called MACROPAD! M here stands for Microcontroller because this 3x4 keyboard controller features the newest technology from the Raspberry Pi sector: say hello to the RP2040. It's a speedy little microcontroller with lots of GPIO pins and 64 times more RAM than the Apollo...

Notify Me

$49.95

Out of stock

Notify Me

i2c / SPI character LCD backpack

Product ID: 292

LCD backpacks reduce the number of pins needed to connect to an LCD. LCDs are a fun and easy way to have your microcontroller project talk back to you. Character LCDs are common, and easy to get, available in tons of colors and sizes. We've written tutorials on using character LCDs with an Arduino (or similar microcontroller) but find that the number of pins...

$9.95

In stock

Seeeduino XIAO Expansion Board - Works With Adafruit QT Py

Product ID: 5033

The Seeeduino XIAO Expansion Board is a great add-on board with a little-bit-of-everything. It works wonderfully with our QT Py boards so we're stocking it for folks to plug in their SAMD21 QT Py or RP2040 QT Py. It enables prototyping in an easy and quick way and with so many hardware add-ons, you can quickly explore near-infinite possibilities of Arduino and...

$17.95

13 in stock

Thin Pen type soldering iron with OLED display

USB C Powered Soldering Iron - Adjustable Temperature Pen-Style - TS80P

Product ID: 4244

The TS80 is a chic and smart soldering iron powered by USB Type-C and QC3.0 standard input. Normally we'd scoff at trying to power a soldering iron off of USB, but thanks to the new USB C standard, the power plug that's included is a 9V 2A so you get a reasonable ~20 Watts of power. So, this is the first USB iron we would feel comfortable stocking, its a nice iron,...

$124.95

10 in stock

Angled shot of radio kit with black earbuds.

ScoutMakes FM Radio Kit

Product ID: 4968

For many of us, the construction of a classic FM radio was one of the very first projects we took on when getting started with DIY electronics. And for good reason. Radio waves are fascinating, they’re everywhere, and they’re free! Radio brings all kinds of information and entertainment—including music, news, and sports—to people all over the...

Notify Me

$62.00

Out of stock

Notify Me

Angled shot of assembled ScoutMaker Robot.

ScoutMakes Robot Kit

Product ID: 4967

Robotics and industrial automation are everywhere these days. Robots help build, package, and ship everything from your breakfast cereal to your car. With that in mind, we designed the ScoutMakes Robot kit to help those with an interest in robotics learn the basics. With it, you will create a simple, wheeled robot while developing a familiarity with concepts like...

$83.00

29 in stock

Motion Control Screwdriver

Product ID: 3856

Doctor Who has the famous sonic screwdriver, and we have the next coolest thing, a Motion Control Electric Screwdriver! Ergonomic, comfortable to hold, and constructed out of stainless steel, it's a seriously exquisite hand tool with a ton of smarts that will make it your new favorite tool. Unlike most screwdrivers where you have to twist your wrist like a uncultured...

More Info

Discontinued

More Info

Adafruit FT232H Breakout - General Purpose USB to GPIO, SPI, I2C - USB C & Stemma QT

Product ID: 2264

Wouldn't it be cool to drive a tiny OLED display, read a color sensor, or even just flash some LEDs directly from your computer? Sure you can program an Arduino or Trinket to talk to these devices and your computer, but why can't your computer just talk to those devices and sensors itself? Well, now your computer can talk to devices using the Adafruit FT232H breakout...

$14.95

In stock

Hand holding rectangle of ITO (Indium Tin Oxide) Coated glass

ITO (Indium Tin Oxide) Coated Glass - 50mm x 50mm

Product ID: 1310

ITO is a clear, conductive liquid/film and here we have it as a coating on a 1mm glass sheet. This is a very interesting and fun material, also used in scientific research and LCD/OLED manufacture! One side of the glass is coated in ITO, you can use the flat of a blade or similar to scrape away some of the film to create 'traces' - just be careful because as it is...

Notify Me

$5.95

Out of stock

Notify Me

Adafruit MCP2221A Breakout - General Purpose USB to GPIO ADC I2C - Stemma QT / Qwiic

Product ID: 4471

$6.50

In stock

Adafruit Animated Eyes Bonnet for Raspberry Pi Mini Kit - Without Displays

Product ID: 3356

The Snake Eyes Bonnet is a Raspberry Pi accessory for driving two 128x128 pixel OLED or TFT LCD displays, and also provides four analog inputs for sensors. It's perfect for making cosplay masks, props, spooky sculptures for halloween, animatronics, robots...anything where you want to add a pair of animated eyes! This product is just the Pi Bonnet itself, and some...

$7.95

43 in stock

Hand holding flexed ITO (Indium Tin Oxide) Coated PET Plastic

ITO (Indium Tin Oxide) Coated PET Plastic - 100mm x 200mm

Product ID: 1309

ITO is a clear, conductive liquid/film and here we have it as a coating on a flexible plastic (PET) sheet. This is a very interesting and fun material, also used in scientific research and LCD/OLED manufacture! One side of the plastic is coated in ITO, you can use the flat of a blade or similar to scrape away some of the film to create 'traces'. It may also be...

$9.95

In stock

Grey and white pulse oximeter with OLED readout screen on top

Finger Pulse Oximeter with Bluetooth LE - BM1000

Product ID: 4582

This Finger Pulse Oximeter with Bluetooth LE is great for monitoring your blood oxygen levels and pulse rate. Simply slide your index finger pad onto the springy sensor and see the readout on the OLED display. You'll see your heart rate pulse, blood oxygen estimation SpO2, and even a little graph of your blood pulsing. This version includes Bluetooth LE connectivity...

$49.95

16 in stock

Angled shot of a 4-channel I2C-safe Bi-directional Logic Level Converter.

4-channel I2C-safe Bi-directional Logic Level Converter - BSS138

Product ID: 757

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flashcards, and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V. Here we've got a 4-channel I2C-safe Bi-directional Logic Level Converter that has open-drain-with-10K-pullups outputs, great for logic...

$3.95

In stock

Adafruit Sensirion SHT40 Temperature & Humidity Sensor wired to Feather with QT cable, showing temperature and humidity on OLED.

Adafruit Sensirion SHT40 Temperature & Humidity Sensor - STEMMA QT / Qwiic

Product ID: 4885

Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And finally, we have some that have a true I2C interface for easy reading. The SHT40 sensor is the fourth generation (started at the SHT10 and worked its way up to the top!). The SHT40 has an excellent ±1.8% typical relative humidity accuracy from 25 to...

$5.95

In stock

Adafruit DS1307 Real Time Clock Assembled Breakout Board

Product ID: 3296

This is a great battery-backed real time clock (RTC) that allows your microcontroller project to keep track of time even if it is reprogrammed, or if the power is lost. Perfect for datalogging, clock-building, time stamping, timers and alarms, etc. The DS1307 is the most popular RTC - but it requires 5V power to work (although we've used it with 5V power and 3.3V...

$7.50

In stock

Adafruit I2S MEMS Microphone Breakout - SPH0645LM4H

Product ID: 3421

Listen to this good news - we now have a breakout board for a super tiny I2S MEMS microphone. Just like 'classic' electret microphones, MEMS mics can detect sound and convert it to voltage, but they're way smaller and thinner. This microphone doesn't even have analog out, it's purely digital. The I2S is a small, low-cost MEMS mic with a range of about 50Hz - 15KHz,...

$6.95

In stock

Angled shot of a purple Adafruit MiniBooster.

Adafruit MiniBoost 5V @ 1A - TPS61023

Product ID: 4654

This adorable little board will come in very handy whenever you need a good amount of 5V power. It's the size of a linear regulator, but it's actually a mini-booster! Input 2-5VDC on one side, and get 5V at up to 1A supply on the other. Perfect for use with battery-powered projects with 2 or 3 Alkaline, or a single Lithium battery. This booster uses a very small but...

$3.95

In stock

Angled shot of a Adafruit RFM95W LoRa Radio Transceiver Breakout.

Adafruit RFM95W LoRa Radio Transceiver Breakout - 868 or 915 MHz - RadioFruit

Product ID: 3072

"You see, wire telegraph is a kind of a very, very long cat. You pull his tail in New York and his head is meowing in Los Angeles. Do you understand this? And radio operates exactly the same way: you send signals here, they receive them there. The only difference is that there is no cat." Sending data over long distances is like magic, and now you can be a magician...

$19.95

In stock

Angled shot of a Adafruit PT1000 RTD Temperature Sensor Amplifier.

Adafruit PT1000 RTD Temperature Sensor Amplifier - MAX31865

Product ID: 3648

For precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensors that contain a resistor that changes resistance value as its temperature changes, basically a kind of thermistor. In this resistance sensor, the resistor is actually a small strip of Platinum with a resistance of 1000 ohms at 0°C, thus...

$14.95

73 in stock

Angled shot of temperature and humidity sensor breakout.

Adafruit HTU21D-F Temperature & Humidity Sensor Breakout Board - STEMMA QT

Product ID: 1899

It's summer and you're sweating and your hair's all frizzy and all you really want to know is why the weatherman said this morning that today's relative humidity would max out at a perfectly reasonable 52% when it feels more like 77%. Enter the HTU21D-F Temperature + Humidity Sensor - the best way to prove the weatherman wrong! This I2C digital humidity sensor is an...

$10.95

In stock

NeoKey Socket Breakout for Mechanical Key Switches with NeoPixel - For MX Compatible Switches

Product ID: 4978

The only thing better than a nice mechanical key, is one that also can glow any color of the rainbow - and that's what the Adafruit NeoKey Breakout will let you do! This little 0.75" x 0.85" PCB can fit one Cherry MX or compatible switch and make it easy to use with a breadboard or perfboard. The breakout has a Kailh socket, which means you can plug in any...

$1.75

In stock

Adafruit TPL5110 Low Power Timer Breakout

Product ID: 3435

With some development boards, low power usage is an afterthought. Especially when price and usability is the main selling point. So what should you do when it's time to turn around and make that project of yours run on a battery or solar? Sure you could try to hot-air that regulator off, or you could jerry-rig a relay. Or, use a 555? Ugh, the options aren't that...

$4.95

In stock

Angled shot of a blue rectangular ADC breakout board.

ADS1015 12-Bit ADC - 4 Channel with Programmable Gain Amplifier - STEMMA QT / Qwiic

Product ID: 1083

For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1015 provides 12-bit precision at 3300 samples/second over I2C. The chip can be configured as 4 single-ended input channels or two differential channels. As a nice bonus, it even includes a programmable gain amplifier, up to x16, to help boost up smaller...

$9.95

In stock

SWD (2x5 1.27mm) Cable Breakout Board

Product ID: 2743

This adapter board is designed to make it easier to use ARM dev boards that use slimmer 2x5 (0.05"/1.27mm pitch) SWD cables for programming. It's helpful for using products like the JTAGulator, STLink or SEGGER J-Link with tiny boards that use the 10-pin SWD programming connector, often Cortex M0 or M3's. This board comes with no cables. It's really just the breakout...

$2.95

In stock

Adafruit 12-Key Capacitive Touch Sensor Breakout with Stemma QT

Adafruit 12-Key Capacitive Touch Sensor Breakout - MPR121 - STEMMA QT

Product ID: 1982

Add lots of touch sensors to your next microcontroller project with this easy-to-use 12-channel capacitive touch sensor breakout board, starring the MPR121. This chip can handle up to 12 individual touchpads. The MPR121 has support for only I2C, which can be implemented with nearly any microcontroller. You can select one of 4 addresses with the ADDR pin, for a total...

$7.95

In stock

Adafruit BMP280 I2C or SPI Barometric Pressure & Altitude Sensor - STEMMA QT

Product ID: 2651

Bosch has stepped up their game with their new BMP280 sensor, an environmental sensor with temperature, barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183. This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI! This precision sensor from Bosch is the best low-cost, precision sensing solution...

$9.95

In stock

TLV62569 3.3V Buck Converter Breakout - 3.3V Output 1.2A Max

Product ID: 4711

This little buck converter based on the TLV62569 3.3V is super handy, taking up to 5.5V input and providing a 3.3V output with up to 1.2A continuous current. It's great for supplying power to popular 3.3V voltage circuits from a range of battery or power options. This chip provides up to 1.2 Amp load current continuously across the entire input voltage range of 3.4...

$3.95

In stock

Top down view of a Adafruit SHARP Memory Display Breakout connected to a half-sized white breadboard.

Adafruit SHARP Memory Display Breakout - 1.3" 168x144 Monochrome

Product ID: 3502

The 1.3" 168x144 SHARP Memory LCD display is a cross between an eInk (e-paper) display and an LCD. It has the ultra-low power usage of eInk and the fast-refresh rates of an LCD. This model has a gray background, and pixels show up as black-on-gray for a nice e-reader type display. It does not have a backlight, but it is daylight readable. For dark/night reading you...

$24.95

In stock

Adafruit VEML7700 Lux Sensor - I2C Light Sensor - STEMMA QT / Qwiic

Product ID: 4162

Vishay has a lot of light sensors out there, and this is a nice simple lux sensor that's easy to add to any microcontoller. Most light sensors just give you a number for brighter/darker ambient lighting. The VEML7700 makes your life easier by calculating the lux, which is an SI unit for light. You'll get more consistent readings between multiple sensors because you...

$4.95

In stock

Angled shot of a ADXL335 5V ready triple-axis accelerometer.

ADXL335 - 5V ready triple-axis accelerometer (+-3g analog out)

Product ID: 163

We've updated our favorite triple-axis accelerometer to now have an on-board 3.3V regulator - making it a perfect choice for interfacing with a 5V microcontroller such as the Arduino. This breakout comes with 3 analog outputs for X, Y and Z axis measurements on a 0.75"x0.75" breakout board. The ADXL335 is the latest and greatest from Analog Devices, known for their...

$14.95

In stock

Adafruit Push-button Power Switch Breakout

Product ID: 1400

The Adafruit Push-button Power Switch is a tidy little design that lets you control a DC power source using an everyday tactile button. The breakout uses a latching analog circuit that is triggered by a push of the button. Press once to turn on, then press again to turn off. The circuit uses a 3A P-FET to connect and disconnect the IN pin to the OUT pin. Works great...

$5.95

In stock

Angled shot of a Adafruit TLV493D Triple-Axis Magnetometer.

Adafruit TLV493D Triple-Axis Magnetometer - STEMMA QT / Qwiic

Product ID: 4366

The TLV493D 3-axis magnetometer is a great little sensor for detecting magnets in 3D. In fact, the manufacturer Infineon suggests it could be used to make a joystick! You could also use it for other cool things like detecting objects with magnets attached, like the lid of a box, or maybe a statue that unlocks your secret lair when placed on your mantle? The TLD493D...

$5.95

89 in stock

Angled shot of BMP388 temperature and pressure sensor.

Adafruit BMP388 - Precision Barometric Pressure and Altimeter - STEMMA QT

Product ID: 3966

Bosch has been a leader in barometric pressure sensors, from the BMP085. BMP180, and BMP280... now we've got the next generation, the Adafruit BMP388 Precision Barometric Pressure sensor. As you would expect, this sensor is similar to its earlier versions but even better. The BMP388 has better precision than ever, which makes it excellent for environmental sensing or...

$9.95

In stock

Angled shot of a Adafruit SGP30 Air Quality Sensor Breakout.

Adafruit SGP30 Air Quality Sensor Breakout - VOC and eCO2 - STEMMA QT / Qwiic

Product ID: 3709

Breathe easy with the SGP30 Multi-Pixel Gas Sensor, a fully integrated MOX gas sensor. This is a very fine air quality sensor from the sensor experts at Sensirion, with I2C interfacing and fully calibrated output signals with a typical accuracy of 15% within measured values. The SGP combines multiple metal-oxide sensing elements on one chip to provide more detailed...

$17.50

In stock

Adafruit Trinkey QT2040 - RP2040 USB Key with Stemma QT

Product ID: 5056

It's half USB Key, half Adafruit QT Py, and a lotta RP2040...it's Trinkey QT2040, the circuit board with an RP2040 heart and Stemma QT legs. Folks are loving the QT Py 2040 we made, but maybe you want something plug-and-play. So we thought, hey what if we made something like that plugs right into your computer's USB port? And this is what we came up with! The PCB is...

$7.95

In stock

Adafruit DPS310 Precision Barometric Pressure and Altitude Sensor

Adafruit DPS310 Precision Barometric Pressure / Altitude Sensor - STEMMA QT / Qwiic

Product ID: 4494

How high are you right now? If you had a precision altitude sensor, you would know for sure! The DPS310 sensor from Infineon a high-precision barometric sensor, perfect for measuring altitude changes with a up to ±0.002 hPa (or ±0.02 m) precision high precision mode and ± 1 hPa absolute accuracy. That means you can know your absolute altitude...

$6.95

In stock

Angled shot of a Adafruit SPI Flash SD Card.

Adafruit SPI Flash SD Card - XTSD 512 MB

Product ID: 4899

This breakout is for a fascinating chip - it looks like an SPI Flash storage chip (like the GD25Q16) but its really an SD card, in an SMT chip format. What that means is that you wire up like an SD card breakout, and use the SD card libraries you already have for your microcontroller. For example, you can use the built in SD library in Arduino, or for CircuitPython...

$9.50

In stock

Adafruit VL6180X Time of Flight Distance Ranging Sensor (VL6180) - STEMMA QT

Product ID: 3316

The VL6180X (sometimes called the VL6180) is a Time of Flight distance sensor like no other you've used! The sensor contains a very tiny laser source, and a matching sensor. The VL6180X can detect the "time of flight", or how long the laser light has taken to bounce back to the sensor. Since it uses a very narrow light source, it is good for determining distance of...

$13.95

In stock

Adafruit LTR390 UV Light Sensor - STEMMA QT / Qwiic

Product ID: 4831

The LTR390 is one of the few low-cost UV sensors available, and it's a pretty nice one! With both ambient light and UVA sensing with a peak spectral response between 300 and 350nm. You can use it for measuring how much sun you can get before needing to covering up. Unlike the Si1145, this sensor will not give you UV Index readings. However, the Si1145 does UV Index...

$4.95

In stock

Adafruit PCF8574 I2C GPIO Expander Breakout - STEMMA QT / Qwiic

Product ID: 5545

Expand your project possibilities, with the Adafruit PCF8574 GPIO Expander Breakout - an affordable 8 channel I2C expander. GPIO expanders work like this: you have a board with some number of GPIO but not enough for your project - maybe you need more buttons or LEDs. You could upgrade to a board with massive number of GPIO like the Grand Central, or you could pop on...

$4.95

In stock

Adafruit VCNL4040 Proximity and Lux Sensor - STEMMA QT / Qwiic

Product ID: 4161

The VCNL4040 is a handy two-in-one sensor, with a proximity sensor that works from 0 to 200mm (about 7.5 inches) and light sensor with range of 0.0125 to 6553 lux. We've all been there. That thing is close but how close? When you need to measure a small distance with reasonable accuracy, such as the rough height of particularly calm bumble bee, the VCNL4040 Proximity...

$5.95

In stock

Angled shot of a Adafruit I2C Non-Volatile FRAM Breakout.

Adafruit I2C Non-Volatile FRAM Breakout - 256Kbit / 32KByte

Product ID: 1895

FRAM, or Ferroelectric Ram, is the coolest new data storage method that all the fashion magazines are talking about. Oh wait, no that's quilted handbags. But FRAM is pretty damn cool too! It's similar to Dynamic random-access memory, only with a ferroelectric layer instead of a dielectric layer. This gives it stable handling (the bytes you write are non-volatile)...

$9.95

In stock

Adafruit HUZZAH32 – ESP32 Breakout Board

Product ID: 4172

Squeeeeze down your next ESP32 project to its bare-bones essential with the Adafruit HUZZAH32 Breakout. This breakout is basically the 'big sister' of our HUZZAH 8266, but instead of an ESP8266 it has the '32! We've pared down our popular Feather ESP32, removing the battery charger and USB-serial converter. You just get a regulator, some protection diodes, two...

$13.50

In stock

Angled shot of a TPL5111 Low Power Timer Breakout Board.

Adafruit TPL5111 Low Power Timer Breakout

Product ID: 3573

With some development boards, low power usage is an afterthought. Especially when price and usability are the main selling points. So what should you do when it's time to turn around and make that project of yours run on a battery or solar? Sure you could try to hot-air that regulator off, or you could jerry-rig a relay. Or, use a 555? Ugh, the options aren't that...

$5.95

In stock

Adafruit Sensirion SHTC3 Temperature & Humidity Sensor - STEMMA QT / Qwiic

Product ID: 4636

Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And finally, we have some that have a true I2C interface for easy reading. The SHTC3 sensor has an excellent ±2% relative humidity and ±0.2 °C accuracy for most uses. Unlike some earlier SHT sensors, this sensor has a true I2C interface on...

$6.95

In stock

Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing - Red

Product ID: 3134

You wont be able to look away from the mesmerizing patterns created by this Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing. This 15x7 LED display can be paired with any of our Feather boards for a beautiful, bright grid of 105 charlieplexed LEDs. It even comes with a built-in charlieplex driver that is run over I2C. We carry these FeatherWings in five vivid...

$9.95

In stock

Adafruit LPS22 Pressure Sensor - STEMMA QT / Qwiic - LPS22HB

Product ID: 4633

We live on a planet with an atmosphere, a big ocean of gaseous air that keeps everything alive - and that atmosphere is constantly bouncing off of us, exerting air pressure on everything around us. But, how much air is in the atmosphere, bearing down on us? This absolute pressure sensor, ST LPS22HB (a.k.a LPS22) can quickly and easily measure this air pressure,...

$6.95

In stock

Angled shot of small rectangular breakout board.

Adafruit LSM6DS3TR-C 6-DoF Accel + Gyro IMU - STEMMA QT / Qwiic

Product ID: 4503

Add motion and orientation sensing to your Arduino project with this affordable 6 Degree of Freedom (6-DoF) sensor with sensors from ST. The board includes an ST LSM6DS3TR-C, a great entry-level 6-DoF IMU accelerometer + gyro. The 3-axis accelerometer can tell you which direction is down towards the Earth (by measuring gravity) or how fast the board is accelerating...

$9.95

In stock

Adafruit SHARP Memory Display Breakout - 2.7" 400x240 Monochrome

Product ID: 4694

The Adafruit 2.7" 400x240 SHARP Memory Display Breakout is a chonky cross between an eInk (e-paper) display and an LCD. It has the ultra-low power usage of eInk and the fast-refresh rates of an LCD. This model has a gray background, and the pixels show up as black-on-gray for a nice e-reader type display. It does not have a backlight, but it is daylight readable. For...

$44.95

63 in stock

Angled shot of black rectangular breakout board with vertical light sensor.

Adafruit Right Angle VEML7700 Lux Sensor - I2C Light Sensor - STEMMA QT / Qwiic

Product ID: 5378

$4.95

In stock

Angled shot of stereo amplifier breakout.

Stereo 2.8W Class D Audio Amplifier - I2C Control AGC - TPA2016

Product ID: 1712

A mini class D with AGC and I2C control? Yes please! This incredibly small stereo amplifier is surprisingly powerful. It is able to deliver 2 x 2.8W channels into 4 ohm impedance speakers (@ 10% THD) and it has a i2c control interface as well as an AGC (automatic gain control) system to keep your audio from clipping or distorting. If you don't want to use I2C to...

$9.95

In stock

Adafruit MPR121 12-Key Capacitive Touch Sensor Gator Breakout - STEMMA QT / Qwiic

Product ID: 4830

Add lots of touch sensors to your next microcontroller project with this easy-to-use 12-channel capacitive touch sensor breakout board, starring the MPR121. This chip can handle up to 12 individual touchpads with plug-and-play STEMMA QT connector and large alligator/croc-clip friendly pads, its a no-solder solution to capacitive touch sensing. The MPR121 has support...

$6.95

In stock

Adafruit eInk Breakout Friend with large E-Ink display attached, wired to Feather

Adafruit eInk Breakout Friend with 32KB SRAM

Product ID: 4224

Add some bi-stability to your life with an Adafruit EInk Breakout Friend - your fun pal who's happy to lend a hand when you want to work with EInk/E-Paper displays. Luckily for us, just about every small-medium size EInk display made these days has a standard 24-pin connection. This breakout will add all the power supply support circuitry and level shifting so you...

$8.50

In stock

USB Microscope - 5MP interpolated 220x magnification / 8 LEDs

Product ID: 636

As electronics get smaller and smaller, you'll need a hand examining PCBs and this little USB microscope is the perfect tool. Its smaller and lighter than a large optical microscope but packs quite a bit of power in its little body. There's a 2 megapixel sensor inside and an optical magnifier that can adjust from 20x (for basic PCB inspection) to 220x (for detailed...

Notify Me

$79.95

Out of stock

Notify Me

Angled shot of white rectangular USB battery pack with 4 dotted lights indicating battery is fully charged.

USB Battery Pack for Raspberry Pi - 10000mAh - 2 x 5V outputs

Product ID: 1566

A large-sized rechargeable battery pack for your Raspberry Pi (or Arduino, or Propeller, or anything else that uses 5V!). This pack is intended for providing a lot of power to an GPS, cell phone, tablet, etc but we found it does a really good job of powering other miniature computers and micro-controllers. If you want something a little smaller, we have a 5000mAh...

Notify Me

$39.95

Out of stock

Notify Me

Adafruit eInk Feather Friend with 32KB SRAM

Product ID: 4446

Easy e-paper finally comes to your Feather with this Adafruit EInk Feather Friend that's designed to make it a breeze to add an eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected....

$8.95

In stock

LED Charlieplexed Matrix - 9x16 LEDs - Red

Product ID: 2947

These are 9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. You don't get any resistors or driver chips with this grid, its just a mess of LEDs in a charlieplexed arrangement This is the Red version. Check out our other colors! Check out our detailed tutorial for Arduino & CircuitPython support,...

$5.95

In stock

Angle shot of Adafruit Triple-axis Magnetometer - LIS2MDL with tan connectors

Adafruit Triple-axis Magnetometer - LIS2MDL - STEMMA QT / Qwiic

Product ID: 4488

Sense the magnetic fields that surround us with this handy triple-axis magnetometer (compass) module. Magnetometers can sense where the strongest magnetic force is coming from, generally used to detect magnetic north, but can also be used for measuring magnetic fields. This sensor tends to be paired with a 6-DoF (degree of freedom) accelerometer/gyroscope to create a...

$7.95

In stock

Angled shot of Wi-Fi co-processor shield PCB.

Adafruit AirLift Shield - ESP32 WiFi Co-Processor

Product ID: 4285

Give your Arduino project a lift with the Adafruit AirLift Shield - a shield that lets you use the powerful ESP32 as a WiFi co-processor. You probably have your favorite Arduino-compatible (like the Metro M4 or the classic Metro 328) that comes with its own set of awesome peripherals and lots of libraries. But it doesn't have WiFi built in! So lets give that chip a...

$14.95

74 in stock

Raspberry Pi computer with E-Ink bonnet attached, displaying weather

Adafruit 2.13" Monochrome E-Ink Bonnet for Raspberry Pi - THINK INK

Product ID: 4687

Easy e-paper finally comes to Raspberry Pi, with this bonnet that's designed to make it a breeze to add a 2.13" 250x122 crisp monochromic eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely...

Notify Me

$19.95

Out of stock

Notify Me

Adafruit 1.3" Color TFT Bonnet for Raspberry Pi - 240x240 TFT + Joystick Add-on

Product ID: 4506

If you'd like a compact color display, with buttons and a joystick - we've got what you're looking for. The Adafruit 1.3" Color TFT Bonnet for Raspberry Pi is the big sister to our mini PiTFT add-ons. This bonnet has 240x240 color pixels in an IPS TFT display controlled over SPI. This display is super small, only about 1.3" diagonal, but since it is an IPS display,...

$17.50

In stock

Tri-Color USB Controlled Tower Light with Buzzer

Product ID: 5125

With this Tri-Color USB Controlled Tower Light with Buzzer, you can easily monitor and alert humanoids as to the status of a project, machine, or even if the bathroom is occupied! Unlike our other tower lights, no wiring or microcontroller programming is required. It's completely plug-and-play for use with any computer that has a USB port, even a Raspberry Pi SBC -...

$74.95

33 in stock

Adafruit Capacitive Touch HAT for Raspberry Pi - Mini Kit - MPR121

Product ID: 2340

This touch-able add on HAT for Raspberry Pi will inspire your next interactive project with 12 capacitive touch sensors. Capacitive touch sensing works by detecting when a person (or animal) has touched one of the sensor electrodes. Capacitive touch sensing used for stuff like touch-reactive tablets and phones, as well as control panels for appliances, which is where...

$14.95

In stock

Sealed Tri-Color USB Controlled Hemisphere Alarm Light

Product ID: 5127

With this Sealed Tri-Color USB Controlled Hemisphere Alarm Light, you can easily monitor and alert humanoids as to the status of a project, machine, or even if the bathroom is occupied! It's a lot like our other alarm light but this one doesn't come with a buzzer and in 'exchange' it has a sealed body which means it can be used in places with more dust and moisture....

$79.95

61 in stock

Adafruit IoT Pi Printer Project Pack - v2

Product ID: 1289

Build an "Internet of Things" connected mini printer that will do your bidding! This is a fun weekend project that comes with a beautiful laser cut case. Once assembled, the little printer connects wirelessly to get Internet data for printing onto 2 1/4" wide receipt paper. Based on a Raspberry Pi computer, this is a powerful mini Linux machine. We have example...

$114.95

3 in stock

Food-Grade Heat Shrink - 3/8" diameter 12" long

Product ID: 1020

We decided to stock this food-safe heat shrink specifically for people who were building beer-brewing or sous-vide projects using our waterproof DS18B20+ digital temperature sensors. This heat shrink is FDA Compliant for contact with food. The end of the sensor is stainless steel, but the jacketing is PVC, not good for dunking into your food or drink! But this heat...

Notify Me

$3.95

Out of stock

Notify Me

Angled shot of Zumo showing the pusher element.

Zumo Robot for Arduino - v1.2

Product ID: 1639

The Pololu Zumo robot is an Arduino-controllable tracked robot platform that is less than 10 cm × 10 cm—small enough to qualify for Mini Sumo. It includes two micro metal gearmotors coupled to a pair of silicone tracks, a stainless steel bulldozer-style blade, an array of six infrared reflectance sensors for line following or edge detection, a 3-axis...

$109.95

23 in stock

LED Charlieplexed Matrix - 9x16 LEDs - Yellow

Product ID: 2948

These are 9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. You don't get any resistors or driver chips with this grid, its just a mess of LEDs in a charlieplexed arrangement This is the Yellow version. Check out our other colors! Check out our detailed tutorial for Arduino & CircuitPython support,...

$6.95

98 in stock

Tri-Color USB Controlled Hemisphere Alarm Light with Buzzer

Product ID: 5126

With this Tri-Color USB Controlled Hemisphere Alarm Light with Buzzer, you can easily monitor and alert humanoids as to the status of a project, machine, or even if the bathroom is occupied! Unlike our "12V" style tower lights, no wiring or microcontroller programming is required. It's completely plug-and-play for use with any computer that has a USB port, even a...

$79.95

13 in stock

Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing Yellow

Product ID: 3135

$10.95

In stock

Coiled LED strip with each LED a different rainbow color

Digital RGB LED Weatherproof Strip - LPD8806 32 LED

Product ID: 306

These LED strips are fun and glowy. There are 32 RGB LEDs per meter, and you can control each LED individually! Yes, that's right, this is the digitally-addressable type of LED strip. You can set the color of each LED's red, green and blue component with 7-bit PWM precision (so 21-bit color per pixel). The LEDs are controlled by shift-registers that are chained up...

More Info

$29.95 / meter

In stock