Search Results For: JST-PH

... in the Adafruit Blog

... in the Adafruit Customer Support Forums

PRODUCTS:

Top view shot of a red and black JST PH 2-Pin Cable to Female Connector - 100mm.

JST PH 2-Pin Cable - Female Connector 100mm

Product ID: 261

Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly chargers! We have the socket 'mating' version of this cable over here, as well as an 'extension' cable that has one of each soldered together. If you want a switch in the middle, try this switched extension cable. Finally, for PCB and breadboard...

$0.75

In stock

JST-PH 2-Pin SMT Right Angle Connector

Product ID: 1769

A simple 2-pin connector that is compatible with the "JST PH 2-pin" connector - perfect for soldering to the bottom of our 3.3V Logic Trinket and 5V Logic Trinket! These mate perfectly with all our 1-cell LiPoly and LiIon batteries as well as our 6V coin cell holder and 3xAAA battery pack. We also have simple JST pigtails that mate with this connector. Note: This...

$0.75

In stock

JST PH 2-Pin Cable – Male Header 200mm

Product ID: 3814

For a really long time we assumed that the JST PH didn't have a free-hanging male header version. But then we found this JST-PH 2-pin Male Cable, and we were like, this is perfect! It's not a genuine JST connector, but it's 100% compatible with a nice clicky connection that you can undo without tearing the contacts from the housing. Plugs in nicely all with our...

$0.75

In stock

JST-PH 2-pin Jumper Cable - 100mm long

Product ID: 4714

We use 2 pin JST PH connectors for all our battery packs, and if you want to put a board in series, like our LC709203F Stemma QT battery gauge, this cable will be very handy! Both ends have a JST PH 2mm pitch 2-pin plug. Between the two, 100mm of color coded wire - red for power, black for ground. No more soldering two pig-tails together! This is an A-A cable, that...

$0.95

In stock

Front shot of JST-PH Battery Extension Cable.

JST-PH Battery Extension Cable - 500mm

Product ID: 1131

By popular demand, we now have a handy extension cord for all of our JST-terminated battery packs (such as our LiIon/LiPoly and 3xAAA holders). One end has a JST-PH socket, and the other end has a matching plug. Between the two, 500mm of color coded wire. Handy for wearable projects where you may want the battery pack far from your Flora but useful in many other...

$1.95

In stock

Angled shot of STEMMA JST PH 4-Pin to Male Header Cable - 200mm.

JST PH 2mm 4-Pin to Male Header Cable - I2C STEMMA Cable - 200mm

Product ID: 3955

This cable will let you turn a JST PH 4-pin cable port into 4 individual wires with high-quality 0.1" male header plugs on the end. We're carrying these to match up with any of our boards with 'STEMMA' connectors on them such as the Hallowing or Trellis M4. Can also be used with any STEMMA breakouts! This one has header pins, so it could be used to connect to socket...

$1.50

In stock

Angled shot of JST PH 3-pin Plug-Plug Cable - 100mm long.

JST PH 2mm 3-pin Plug-Plug Cable - 100mm long

Product ID: 4336

This cable is a little over 100mm / 4" long and fitted with JST-PH 3-pin connectors on either end. We dig the solid and compact nature of these connectors and the latch that keeps the cable from coming apart easily. We're carrying these to match up with our STEMMA boards and sensors that have 3-pin connections - and the wires are even color coded! Red is power,...

$0.75

In stock

Angled shot of STEMMA JST PH 4-Pin to Female Header Cable - 200mm.

JST PH 2mm 4-Pin to Female Socket Cable - I2C STEMMA Cable - 200mm

Product ID: 3950

This cable will let you turn a JST PH 4-pin cable port into 4 individual wires with high-quality 0.1" female sockets on the end. We're carrying these to match up with any of our boards with 'STEMMA' connectors on them such as the Hallowing or Trellis M4. Can also be used with any STEMMA breakouts! This one has socket pins, so it could be used to connet to wires or...

$1.50

In stock

JST-PH 2-Pin SMT Right Angle Breakout Board

Product ID: 1862

A simple 2-pin connector soldered onto a breadboard-friendly breakout. This is compatible with the "JST PH 2-pin" connector. Mates perfectly with all our 1-cell LiPoly and LiIon batteries as well as our 6V coin cell holder and 3xAAA battery pack. We also have simple JST pigtails that mate with this connector. You may get an off-white or black JST connector.

$1.50

In stock

Angled shot of JST PH 3-Pin Socket to Color Coded Cable - 200mm

JST PH 2mm 3-Pin Socket to Color Coded Cable - 200mm

Product ID: 4046

This cable will let you turn a JST PH 3-pin cable socket into 3 individual tinned wires. These are great to match up with our JST 3-PH cables, for extending and connecting sensors or LEDs, and the wires are even color coded! We also carry the socket 'mating' version of this cable over here. For more information about JST PH connectors, visit the JST website

$0.95

In stock

Angled shot of ten 4-pin JST-PH connectors.

JST PH 4-pin Horizontal Connector (10-pack) - STEMMA

Product ID: 4392

Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of our favorite 2mm pitch connector - the JST PH 4 pin. These are the horizontal style. You can use these with any of our JST PH 4 / STEMMA cables. They're not STEMMA QT compatible (those use the smaller JST SH). However, you can fit Seeed Grove connectors into JST...

$3.50

78 in stock

JST PH 2.0mm Pitch Connector 220 Piece Kit with many connectors and contacts in opened box

JST PH 2.0mm Pitch Connector Kit - 220 Piece Kit

Product ID: 4422

Totally 220 pieces, this JST-PH Connector Kit is a must-have for your workstation. You'll have enough sockets and plugs to fuel your maker tendencies for days on end! These connectors are really common in electronics, we use the 2 pin ones for our batteries and battery packs. The 3 pin and 4 pin are used for STEMMA connectors. The 4 pin size is even compatible with...

$8.95

In stock

Angled shot of JST PH 3-pin Plug to Color Coded Alligator Clips Cable.

JST PH 2mm 3-pin Plug to Color Coded Alligator Clips Cable

Product ID: 4030

This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with grippy mini alligator clips. We're carrying these to match up with any of our boards or breakouts with 3-pin 'STEMMA' connectors on them such as the HalloWing or NeoTrellis M4. This cable has a JST PH 3-pin on one side and alligator clips on the other, so it could be used to connect...

$1.95

In stock

Angled shot of ten JST PH 4-pin Vertical Connector.

JST PH 2mm 4-pin Vertical Connector (10-pack) - STEMMA

Product ID: 4390

Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of our favorite 2mm pitch connector - the JST PH 4 pin. These are the vertical style. You can use these with any of our JST PH 4 / STEMMA cables. They're not STEMMA QT compatible (those use the smaller JST SH). However, you can fit Seeed Grove connectors into JST PH...

$3.50

13 in stock

Angled shot of JST PH 4-Pin Socket to Color Coded Cable - 200mm.

JST PH 2mm 4-Pin Socket to Color Coded Cable - 200mm

Product ID: 4045

This cable will let you turn a JST PH 3-pin cable socket into 4 individual tinned wires. These are great to match up with our JST 4-PH cables, for extending and connecting sensors or LEDs, and the wires are even color coded! Black for GND. Red for V+. White for SDA. Green for SCL. Even though this is a JST PH connector, it will fit into a Seeed Grove connector and...

$0.95

In stock

Angled shot of JST PH 4-pin Plug to Color Coded Alligator Clips Cable.

JST PH 2mm 4-pin Plug to Color Coded Alligator Clips Cable

Product ID: 4029

This cable will let you turn a JST PH 4-pin cable port into 4 individual wires with grippy mini alligator clips. We're carrying these to match up with any of our boards or breakouts with 'STEMMA' connectors on them such as the HalloWing or NeoTrellis M4. Can also be used with any STEMMA breakouts! This cable has a JST PH 4-pin on one side and alligator clips on the...

$2.50

In stock

Angled shot of ten JST PH 3-pin Vertical Connector.

JST PH 2mm 3-pin Vertical Connector (10-pack) - STEMMA

Product ID: 4389

Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of our favorite 2mm pitch connector - the JST PH 3 pin. These are the vertical style. You can use these with any of our JST PH 3 / STEMMA cables. They're not STEMMA QT compatible (those use the smaller JST SH). We also carry these connectors in horizontal style. For...

$3.50

45 in stock

Angled shot of ten JST PH 3-pin Horizontal Connector .

JST PH 2mm 3-pin Horizontal Connector (10-pack) - STEMMA

Product ID: 4391

Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of our favorite 2mm pitch connector - the JST PH 3 pin. These are the horizontal style. You can use these with any of our JST PH 3 / STEMMA cables. They're not STEMMA QT compatible (those use the smaller JST SH). We also carry these connectors in vertical style. For...

$3.50

71 in stock

Angled shot of STEMMA JST PH 3-Pin to Female Header Cable - 200mm.

STEMMA JST PH 2mm 3-Pin to Female Socket Cable - 200mm

Product ID: 3894

This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" female header sockets on the end. We're carrying these to match up with our Hallowing, for extending and connecting sensors or LEDs - and the wires are even color coded! We also stock a version with male socket headers on the end For more information about JST PH...

$1.25

In stock

Angled shot of STEMMA JST PH 3-Pin to Male Header Cable - 200mm.

STEMMA JST PH 2mm 3-Pin to Male Header Cable - 200mm

Product ID: 3893

This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. We're carrying these to match up with our Hallowing, for extending and connecting sensors or LEDs - and the wires are even color coded! We also stock a version with female socket headers on the end For more information about JST PH...

$1.25

In stock

Switched JST-PH 2-Pin SMT Right Angle Breakout Board

Product ID: 1863

This switched JST connector is the best way to quickly prototype with our LiPoly batteries. We paired a genuine JST connector with a slide switch that can do up to 600mA. Both are soldered onto a breadboard-friendly breakout. There's two ground pins, one 'switched' power pin, and one pin that is always on. This is compatible with the "JST PH 2-pin" connectors we use...

$2.50

In stock

Angled shot of 4-pin JST PH to JST SH Cable.

4-pin JST PH to JST SH Cable - STEMMA to QT / Qwiic - 200mm long

Product ID: 4424

Are you a maker in the midst of a STEMMA dilemma? This 200mm long 4-wire cable is a fantastic chimera-cable fitted with STEMMA QT / Sparkfun Qwiic JST SH on one end, and STEMMA JST PH connectors on the other. You can sand down the center-nub key on the JST PH side to make it fit in a Grove connector. Chunkier JST PH connectors come with 2mm pitch, and JST SH (also...

$0.95

In stock

Angled shot of 150mm/6" long 4-Pin JST-PH Cable

STEMMA Cable - 4 Pin JST-PH 2mm Cable–Female/Female - 150mm/6" Long

Product ID: 3568

This 4-wire cable is a little over 150mm / 6" long and fitted with JST-PH female 4-pin connectors on each end. These types of JST cables are commonly found on small rechargeable battery packs, RC receivers and transmitters, tiny cameras, and other small electronic devices We're using these to connect to STEMMA boards, the connector is compact yet durable, stays...

$0.75

In stock

Angled shot of a micro servo with a JST cable.

Micro Servo with 3-pin JST PH 2mm Cable - - STEMMA Connector Compatible

Product ID: 4326

This tiny little servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in...

$5.95

In stock

6V Air Valve with 2-pin JST PH Connector - FA0520E

Product ID: 4663

Here's a cool new valve for makers interested in pneumatic systems, hydraulics, inflatables, projects with compressed air, and the like. These air valves, also known by other names like, automatic bleeding valve or air release valve, are typically used to passively release air from a pressurized container. This valve is rated at 6V but we used it just fine at 5V....

$2.95

In stock

Adafruit STEMMA Non-Latching Mini Relay - JST PH 2mm

Product ID: 4409

STEMMA plug-and-play parts make your next project soldering-free! This is the STEMMA Non-Latching Mini Relay. It gives you power to control, and control over power. Put simply, you can now turn on and off lamps, fans, solenoids, and other small appliances that run on up to 250VAC or DC power using any microcontroller or microcomputer, with ease. No worrying about...

$5.95

In stock

Adafruit NeoPixel LED Strip with 3-pin JST PH Connector lit up rainbow

Adafruit NeoPixel LED Strip with 3-pin JST PH 2mm Connector - 60 LED/meter / 0.5 Meter

Product ID: 3919

Plug in and glow, this Adafruit NeoPixel LED Strip with JST PH Connector has 30 total LEDs in a "60 LED per meter" spacing, and is 0.5 meters long, in classy Adafruit Black. Its not too long, but has lots of glowing action. Perfect for use with a Hallowing, or a custom design with a JST PH socket. The strips come in a 0.5 meter reel with three 100mm long wires...

$12.50

In stock

2 x AAA Open Battery Holder with JST PH Connector

Product ID: 4192

This battery holder connects 2 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is open and nicely slim, and 2 AAA's add up to about 3V for low-voltage electronics projects. Fits any standard AAA battery. When using rechargeable NiMH the output voltage will range from about 2.7V with charged batteries to 1.8V at...

$1.75

In stock

Angled shot of 2 x AA battery holder with JST PH connector.

2 x AA Open Battery Holder with JST PH Connector

Product ID: 4194

This battery holder connects 2 AA batteries together in series for powering all kinds of projects. We spec'd these out because the box is fairly slim, and 2 AA's add up to about 3V for many low voltage electronics projects. Fits any standard AA battery. When using rechargeable NiMH the output voltage will range from about 2.7V with charged batteries to 1.8V at the...

$1.95

41 in stock

Top view of four connected pairs of JST PH compatible cables.

2.0mm Pitch Cable Matching Pairs - JST PH Compatible

Product ID: 5161

These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect. These cables are nice and long, 20 cm each, in fact. They've got both small form factor and are a matching set, with an inline socket and plug connector. The two friction lock to make easy-breezy...

More Info

In stock

More Info

Angled shot of 2 x AA battery holder with on-off switch and JST PH connector.

2 x AA Battery Holder with On/Off Switch & JST PH Connector

Product ID: 4193

This battery holder connects 2 AA batteries together in series for powering all kinds of projects. We spec'd these out because the box is fairly slim, and 2 AA's add up to about 3V for many low voltage electronics projects, plus it has a nifty on-off switch. Fits any standard AA battery. When using rechargeable NiMH the output voltage will range from about 2.7V with...

Notify Me

$1.95

Out of stock

Notify Me

Angled shot of two 2.0mm pitch 3-pin JST PH matching cable pairs. The cables are not connected.

2.0mm Pitch 3-pin Cable Matching Pair - JST PH Compatible

Product ID: 5087

$0.95

In stock

Angled shot of two separate JST-PH 2.00mm Pitch 6-pin Matching Pair Cables - 40cm long.

2.0mm Pitch 6-pin Cable Matching Pair - JST PH Compatible

Product ID: 5090

$0.95

In stock

Angled shot of two 2.0mm pitch 4-pin JST PH matching cable pairs. The cables are not connected.

2.0mm Pitch 4-pin Cable Matching Pair - JST PH Compatible

Product ID: 5088

$0.95

In stock

Angled shot of 2 x AAA battery holder with JST PH connector.

2 x AAA Battery Holder with On/Off Switch & JST PH Connector

Product ID: 4191

This battery holder connects 2 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is nicely slim, and 2 AAA's add up to about 3V for low-voltage electronics projects, plus it has a nifty on-off switch. Fits any standard AAA battery. When using rechargeable NiMH the output voltage will range from about 2.7V with...

$1.95

In stock

Angled shot of two 2.0mm pitch 5-pin matching cable pairs. The cables are not connected.

2.0mm Pitch 5-pin Cable Matching Pair - JST PH Compatible

Product ID: 5089

$0.95

In stock

Soil sensor in small potted plant, with wires connected to Adafruit Metro

Adafruit STEMMA Soil Sensor - I2C Capacitive Moisture Sensor - JST PH 2mm

Product ID: 4026

Most low cost soil sensors are resistive style, where there's two prongs and the sensor measures the conductivity between the two. These work OK at first, but eventually start to oxidize because of the exposed metal. Even if they're gold plated! The resistivity measurement goes up and up, so you constantly have to re-calibrate your code. Also, resistive measurements...

$7.50

68 in stock

Adafruit STEMMA Speaker - Plug and Play Audio Amplifier - JST PH 2mm

Product ID: 3885

Hey, have you heard the good news? With Adafruit STEMMA boards you can easily and safely plug sensors and devices together, like this Adafruit STEMMA Speaker - Plug and Play Audio Amplifier. Like the name implies, it's got a class D audio amplifier on board, and our favorite little 1 Watt 8 ohm speaker. Connecting it up is easy - you only need ground, 3 to 5V power,...

$5.95

7 in stock

Circuit Playground TFT Gizmo - Bolt-on Display + Audio Amplifier - JST PH 2mm

Product ID: 4367

Extend and expand your Circuit Playground projects with a bolt on TFT Gizmo that lets you add a lovely color display in a sturdy and reliable fashion. This PCB looks just like a round TFT breakout but has permanently affixed M3 standoffs that act as mechanical and electrical connections. Once attached you'll get a 1.54" 240x240 IPS display with backlight control, two...

$19.95

In stock

Top view of Adafruit LC709203F LiPoly / LiIon Fuel Gauge and Battery Monitor powered by a Lipoly battery and an OLED display.

Adafruit LC709203F LiPoly / LiIon Fuel Gauge and Battery Monitor - STEMMA JST PH & QT / Qwiic

Product ID: 4712

Low cost Lithium Polymer batteries have revolutionized electronics - they're thin, they're light, they can be regulated down to 3.3V and they're easy to charge. On your phone, there's a little image of a battery cell that tells you the percentage of charge - so you know when you absolutely need to plug it in and when you can stay untethered. The Adafruit LC709203F...

$6.95

In stock

3 x AAA Battery Holder with On/Off Switch and 2-Pin JST

Product ID: 727

This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim, and 3 AAA's add up to about 3.3-4.5V, a very similar range to Lithium Ion/polymer (Li-Ion) batteries and have an on-off switch. That makes them ideal for use with 3.3V projects that have a 2-pin JST connector meant for one...

$1.95

In stock

3 x AA Battery Holder with On/Off Switch, JST, and Belt Clip

Product ID: 3287

This battery holder connects 3 AA batteries together in series for powering all kinds of projects. We spec'd these out because the box is compact, and 3 AA's add up to about 3.3-4.5V, a very similar range to Lithium Ion/polymer (Li-Ion) batteries, plus it has a nifty on-off switch. That makes them ideal for use with 3.3V projects that have a 2-pin JST connector meant...

Notify Me

$2.95

Out of stock

Notify Me

Angled shot of 3 x AA battery holder with on-off switch and JST SH connector.

3x AA Battery Holder with On/Off Switch and 2-Pin JST

Product ID: 4779

Here's another addition to our growing family of AA battery holders. Behold! A holder for three (3) AA batteries! It's got a 6" long genuine JST-PH 2-pin cable connector, an On/Off switch, and, oh yes, it's in classy Adafruit black. This battery holder connects 3 AA batteries together in series for powering all kinds of projects. We spec'd these out because the box...

Notify Me

$2.95

Out of stock

Notify Me

Lithium Ion Polymer Battery - 3.7v 100mAh

Product ID: 1570

Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of ~100mAh for a total of about 0.4 Wh. If you need a larger battery, we have a full range of bigger cells The batteries come pre-attached with a genuine 2-pin JST-PH connector as...

$5.95

In stock

Angled shot of 3 x AAA battery holder with on-off switch, JST PH connector, and belt clip.

3 x AAA Battery Holder with On/Off Switch, JST, and Belt Clip

Product ID: 3286

This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim, and 3 AAA's add up to about 3.3-4.5V, a very similar range to Lithium Ion/polymer (Li-Ion) batteries, plus it has a nifty on-off switch. That makes them ideal for use with 3.3V projects that have a 2-pin JST connector meant...

$2.95

In stock

Angled shot of a TinyPICO - ESP32 Development Board.

TinyPICO - ESP32 Development Board - V2

Product ID: 4335

The smallest, most feature-rich ESP32 dev board is here! TinyPICO has incredible processing power for a board that's shorter than an alkaline battery. Thanks to creator-maker Seon Rozenblum, you can tinker with a tiny, mighty, uncompromising board with 4MB extra RAM, on-board RGB LED, and a 700 mAh 3.3V regulator. MicroPython firmware is pre-loaded, and with support...

$20.00

In stock

Trinket M0 Powered NeoPixel Goggle Kit Pack

Product ID: 2221

One of the most popular Trinket projects now has its own kit pack! Make your very own programmable NeoPixel goggles with 2 x 16 LED rings and an Adafruit Trinket. It even comes with a rechargeable LiPoly battery and charger. It's a great easy build and when you're done you'll have the coolest accessory. Follow along with our popular Kaleidoscope Eyes tutorial. The...

$39.95

7 in stock

Adafruit NeoPixel LED Strip with 3-pin JST Connector lit up rainbow

Adafruit NeoPixel LED Strip with 3-pin JST Connector - 1 meter - 30 LEDs / meter

Product ID: 4801

Plug in and glow, this Adafruit NeoPixel LED Strip with JST PH Connector has 30 total LEDs and is 1 meter long, in classy Adafruit Black. It's not too long but has lots of glowing action. Perfect for use with a Hallowing, PyPortal, BrainCraft HAT or any other existing or custom design with a "STEMMA" 3-pin JST PH socket. The strips come in a 1-meter reel with three...

$12.50

In stock

Top view shot of JST 2-pin Extension Cable with On/Off Switch.

JST 2-pin Extension Cable with On/Off Switch - JST PH2

Product ID: 3064

By popular request - we now have a way you can turn on-and-off Lithium Polymer batteries without unplugging them. This PH2 Female/Male JST 2-pin Extension Cable comes with an in-line Switch - click once to turn on, click again to turn off. It's super handy especially in tandem with our JST-terminated battery packs or LiIon & LiPoly batteries/accessories/chargers!...

$2.95

In stock

Angled shot of STEMMA QT / Qwiic JST SH 4-pin Cable.

STEMMA QT / Qwiic JST SH 4-pin Cable - 100mm Long

Product ID: 4210

This 4-wire cable is a little over 100mm / 4" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove. This cable can be used with Qwiic boards, to easily connect sensors and drivers from one board to the other....

$0.95

In stock

Top view of JST SH 4-pin to Premium Male Headers Cable next to US quarter for scale.

STEMMA QT / Qwiic JST SH 4-pin to Premium Male Headers Cable - 150mm Long

Product ID: 4209

This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male headers on the other. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove. This cable can be used with Qwiic boards, to easily connect sensors...

$0.95

In stock

Angled shot of JST SH 4-Pin Cable - 200mm Long.

STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long

Product ID: 4401

This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove. This cable can be used with Qwiic or STEMMA QT boards, to easily connect sensors and drivers from one board...

Notify Me

$0.95

Out of stock

Notify Me

STEMMA QT / Qwiic JST SH 4-Pin Cable - 50mm Long

Product ID: 4399

This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove. This cable can be used with Qwiic or STEMMA QT boards, to easily connect sensors and drivers from one board to the other....

$0.95

In stock

Angled shot of JST SH 4-pin Cable with Premium Female Sockets.

STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets - 150mm Long

Product ID: 4397

This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium female headers on the other. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove. This cable can be used with Qwiic boards, to easily connect sensors and...

Notify Me

$0.95

Out of stock

Notify Me

Angled shot of 400mm long STEMMA QT cable.

STEMMA QT / Qwiic JST SH 4-Pin Cable - 400mm long

Product ID: 5385

This 4-wire cable is a little over 400mm / 15.7" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove. This cable can be used with Qwiic boards, to easily connect sensors and drivers to boards with 0.1" socket...

$1.50

In stock

Angled shot of 300mm long STEMMA QT cable

STEMMA QT / Qwiic JST SH 4-Pin Cable - 300mm long

Product ID: 5384

This 4-wire cable is a little over 300mm / 11.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove. This cable can be used with Qwiic boards, to easily connect sensors and drivers to boards with 0.1" socket...

$1.25

In stock

10.1" Display & Audio 1280x800 IPS - HDMI/VGA/NTSC/PAL

Product ID: 1694

Make a lovely audio/video setup with a 10.1" IPS screen with HDMI stereo speaker support. For video, we have a beautiful bright 10.1" TFT display with incredibly high resolution and great angle-visibility! We tried to get the thinnest, brightest, highest resolution display that would be good for embedded computing usage. The visible display measures 10" diagonal and...

Notify Me

$174.95

Out of stock

Notify Me

Angled shot of clear turbine flow sensor.

Clear Turbine Water Flow Sensor with 3-pin JST

Product ID: 5066

Measure liquid/water flow for your solar, computer cooling, or gardening project using this handy basic flow meter featuring a fully clear plastic body. This sensor sits in line with your water line and uses a pinwheel sensor to measure how much liquid has moved through it. The pinwheel has a little magnet attached, and there's a hall effect magnetic sensor on the...

$6.50

In stock

JST SH 9-Pin Cable - 100mm long

Product ID: 4350

This 9-pin cable is just about 100mm / 4" long and fitted with JST-SH female connectors on both ends. Compared with chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel and are easy to insert and remove. We got these especially for our fantastically spooky Adafruit MONSTER M4SK in case you'd like to split the mask in two and...

$1.95

27 in stock

Flora Sewable 3-Pin JST Wiring Adapter

Product ID: 2566

This product's about as simple as a cup of lemonade on a hot summer day. And, like lemonade, it's just three components! This board is a sewable adapter with a 3-pin JST wiring adapter. It's a perfect way to add a simple link between things like our Flora NeoPixels and more complicated products like our NeoPixel Rings. There are three holes on the board that are...

$1.95

19 in stock

Top view of various JST-SH cables of varying lengths and connectors.

JST-SH 4-pin STEMMA QT / Qwiic Cables in Various Lengths

Product ID: 4912

These cables can be used with Qwiic or STEMMA QT boards to easily connect sensors and drivers from one board to the other. This variety of cables gives you the option of breadboarding with headers, using capacitive touch with alligator clips, and more. Compared with the chunkier JST-PH, these are 1mm pitch instead of 2mm, but still have a nice latching feel, while...

More Info

In stock

More Info

Lithium Ion Polymer Battery - 3.7v 350mAh

Product ID: 2750

Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 350mAh for a total of about 1.3 Wh. If you need a larger (or smaller!) battery, we have a full range of LiPoly batteries. The batteries come pre-attached with a genuine 2-pin JST-PH...

Notify Me

$6.95

Out of stock

Notify Me

Lithium Ion Polymer Battery - 3.7v 2500mAh

Product ID: 328

Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 2500mAh for a total of about 10 Wh. If you need a smaller battery, we also have a 1200mAh model The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown and...

$14.95

In stock

1.25mm Pitch 4-pin Cable Matching Pair - 40cm long - Molex PicoBlade Compatible

Product ID: 4722

When 0.1" is too big, and JST PH's too chunky, these ultra-slim 1.25mm connectors are a reliable alternative. These are only 1.25mm pitch, but have a nice clicky connection. These cables are nice and long, 40cm in fact. They've got both small form factor and are a matching set, with an inline socket and plug connector. The two friction lock to make easy-breezy...

Notify Me

$0.95

Out of stock

Notify Me

Circuit Playground Express Advanced Pack

Product ID: 2769

Circuit Playground Express is the next step towards a perfect introduction to electronics and programming. We've taken the original Circuit Playground Classic and made it even better! Not only did we pack even more sensors in, we also made it even easier to program. You can now start your journey with Microsoft MakeCode block-based or Javascript programming. If...

$99.95

3 in stock

Lithium Ion Polymer Battery - 3.7v 500mAh

Product ID: 1578

Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 500mAh for a total of about 1.9 Wh. If you need a larger (or smaller!) battery, we have a full range of LiPoly batteries. The batteries come pre-attached with a genuine 2-pin JST-PH...

$7.95

In stock

Slim Lithium Ion Polymer Battery 3.7v 400mAh with JST 2-PH connector and short cable

Lithium Ion Polymer Battery Ideal For Feathers - 3.7V 400mAh

Product ID: 3898

Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 400mAh for a total of about 1.9 Wh. If you need a larger (or smaller!) battery, we have a full range of LiPoly batteries. The batteries come pre-attached with a genuine 2-pin 25mm...

$6.95

94 in stock

Angled shot of blue rectangular lithium polymer battery with 2-pin JST connector.

Lithium Ion Polymer Battery - 3.7V 10050mAh (10 Ah)

Product ID: 5035

Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 10,050mAh (a.k.a 10 Ah) for a total of about 37 Wh. If you don't need as much power, we also have several mAh variations of LiPos. This pack uses higher-density 18650 cells for a...

Notify Me

$29.95

Out of stock

Notify Me

Mono Enclosed Speaker - 3W 4 Ohm

Product ID: 3351

Listen up! This 2.8" x 1.2" speaker is a great addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularly like this speaker as it is small and enclosed for good audio volume and quality. It has a handy JST 2PH input cable to add audio to your displays and other projects (this connector is part of the JST-PH series which is...

$3.95

In stock

Molex PicoBlade 2-pin Cable - 200mm

Product ID: 3922

When 0.1" is too big, and JST PH's too chunky, the ultra-slim "PicoBlade" is a reliable alternative. These are only 1.25mm pitch, but have a nice clicky connection. This cable is nice and long, 200mm in fact. It's got both small form factor (won't take up a lot of real estate on your PCB) and friction lock to make easy-breezy connections to your HalloWing or anything...

$0.95

In stock

Lithium Ion Polymer Battery 3.7v 420mAh with JST 2-PH connector and short cable

Lithium Ion Polymer Battery with Short Cable - 3.7V 420mAh

Product ID: 4236

Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 420mAh for a total of about 1.55 Wh. If you need a larger (or smaller!) battery, we have a full range of LiPoly batteries The batteries come pre-attached with a genuine 2-pin JST-PH...

$6.95

In stock

Lithium Ion Polymer Battery - 3.7v 1200mAh

Product ID: 258

Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 1200mAh for a total of about 4.5 Wh. If you need a larger battery, we also have a 2500mAh+ model The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown and...

$9.95

In stock

Angled shot of a Adafruit Universal USB / DC / Solar Lithium Ion/Polymer charger connected to a solar panel and 3 AAA batteries.

Adafruit Universal USB / DC / Solar Lithium Ion/Polymer charger - bq24074

Product ID: 4755

This charger is the only one you need to keep all your Lithium Polymer (LiPoly) or Lithium Ion (LiIon) rechargeable batteries topped up. No matter the power source at your disposal! The Adafruit Universal USB / DC / Solar Lithium Ion/Polymer Charger can use USB, DC or Solar power, with a wide 5-10V input voltage range! The charger chip is super smart, and will reduce...

$14.95

In stock

Lithium Ion Polymer Battery 3.7v 2000mAh with JST 2-PH connector

Lithium Ion Battery - 3.7v 2000mAh

Product ID: 2011

Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 2000mAh. If you need a larger (or smaller!) battery, we have a full range of LiPoly batteries The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown and...

$12.50

In stock

Lithium Ion Polymer Battery - 3.7v 150mAh

Product ID: 1317

Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 150mAh for a total of about 0.6 Wh. If you need a larger battery, we have a full range of bigger cells The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown...

$5.95

In stock

Adafruit NeoTrellis RGB Driver PCB for 4x4 Keypad

Product ID: 3954

By popular request, we've upgraded our popular Trellis elastomer button kits to now have a PCB with full color NeoPixel support! You heard that right, no more single-color LEDs, you can now have any color you like under the fantastic rubbery button pads we sell. These 4x4 button pad boards are fully tile-able and communicate over I2C. With 5 address pins, you've got...

$12.50

In stock

1.25mm Pitch 2-pin Cable Matching Pair - 40cm long - Molex PicoBlade Compatible

Product ID: 4720

$0.95

In stock

Lithium Ion Polymer Battery 3.7v 350mAh with JST 2-PH connector and short cable

Lithium Ion Polymer Battery with Short Cable - 3.7V 350mAh

Product ID: 4237

Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 350mAh for a total of about 1.3 Wh. If you need a larger (or smaller!) battery, we have a full range of LiPoly batteries The batteries come pre-attached with a genuine 2-pin JST-PH...

$5.95

In stock

Angled shot of closed 2 x 2032 coin cell battery holder with on-off switch and JST PH Connector.

2 x CR2032 Coin Cell Battery Holder - 6V output - On/Off switch

Product ID: 783

This tiny coin cell battery holder is ideal for small portable or wearable projects. It holds two 20mm coin cells (2032 or CR2032 are the most popular size) in series to generate 6V nominal. (If you want only 3V, we suggest sticking a crumpled piece of tin foil in one of the slots.) 20mm coin cells are popular as they are used in keychain lights, so they are easy to...

$1.95

In stock

Grove Cable Pigtail - 2mm pitch 100mm long

Product ID: 5244

If you'd like to make a connection to a board or breakout with Seeed Grove connection, this 100mm long 4-wire cable is fitted with a Grove connector and four bare wires. Please note you will have to watch for voltages on the power/signal pin when using 3V-only sensors, because Grove boards that are 5V logic like many Arduino UNO-compatibles. The colors are: Black for...

$0.95

In stock

Rectangular Stereo Enclosed Speaker Set with JST cable

Stereo Enclosed Speaker Set - 3W 4 Ohm

Product ID: 1669

Listen up! This set of two 2.8" x 1.2" speakers are the perfect addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularly like these speakers as they are small and enclosed for good audio volume and quality. The pair have a handy SPK input cable to add audio to your displays (the connectors are similar to the JST-PH series...

$7.50

In stock

Angled shot of 1.25mm pitch 2-pin 20cm long cable.

1.25mm Pitch 2-pin Cable 20cm long 1:1 Cable - Molex PicoBlade Compatible

Product ID: 4922

When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection. This cable is handy and not too long, 20cm in fact. The friction lock makes easy-breezy connections whenever you need light and small connectivity. Note that this cable is 1:1 'symmetric' type...

$0.75

2 in stock

1.25mm Pitch 3-pin Cable Matching Pair - 40cm long - Molex PicoBlade Compatible

Product ID: 4721

$0.95

In stock

TinyPICO ESP32 Development Board with USB-C

Product ID: 5028

TinyPICO is the world’s smallest, fully-featured ESP32 development board, designed to unlock the power of the ESP32’s dual-core 240MHz and internet connectivity, in a package smaller than your thumb! Your very own TinyPICO V2 with USB-C and with MicroPython pre-installed. Comes with unassembled male headers, stackable headers, a JST PH battery connector,...

$21.95

In stock

Angled shot of 1.25mm pitch 5-pin 20cm long cable.

1.25mm Pitch 5-pin Cable 20cm long 1:1 Cable - Molex PicoBlade Compatible

Product ID: 4925

$0.95

In stock

Angled shot of 1.25mm pitch 20cm long 4-pin cable.

1.25mm Pitch 4-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible

Product ID: 4924

Notify Me

$0.95

Out of stock

Notify Me

Angled shot of 20cm long 1.25mm pitch 8-pin cable.

1.25mm Pitch 8-pin Cable 20cm long 1:1 Cable - Molex PicoBlade Compatible

Product ID: 4928

$1.25

In stock

Angled shot of 20cm long 1.25mm pitch 10-pin color-coded cable.

1.25mm Pitch 10-pin Cable 20cm long 1:1 Cable - Molex PicoBlade Compatible

Product ID: 4930

$1.25

40 in stock

STEMMA Wired Tactile Push-Buttons connected to a half sized white breadboard

STEMMA Wired Tactile Push-Button Pack - 5 Color Pack

Product ID: 4431

Little clicky switches are standard input "buttons" on electronic projects. These are just like our Colorful Round Tactile Button Switch Assortment, but already assembled onto a PCB - they even have a pull-up resistor installed! The pins are normally open (disconnected) and when the button is pressed they are momentarily closed. Each button comes with a candy-colored...

$7.50

In stock

Adafruit TMP235 - Plug-and-Play STEMMA Analog Temperature Sensor - TMP235

Product ID: 4686

For fans of the TMP36, we now have a very similar analog temperature sensor with a 3-pin JST connector (we call these STEMMA connectors). Unlike many of our temperature sensors, this one is analog output, not I2C, so its best used by a microcontroller with an analog input, as most microcontrollers do. These sensors are very simple to use, no libraries or complex...

$2.50

In stock

Angled shot of 1.25mm Pitch 6-pin Cable 20cm long.

1.25mm Pitch 6-pin Cable 20cm long 1:1 Cable - Molex PicoBlade Compatible

Product ID: 4926

$1.25

In stock

Angled shot of 20cm long 1.25mm pitch color-coded 9-pin cable.

1.25mm Pitch 9-pin Cable 20cm long 1:1 Cable - Molex PicoBlade Compatible

Product ID: 4929

$1.25

20 in stock

Angled shot of 1.25mm pitch 20cm long 3-pin cable.

1.25mm Pitch 3-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible

Product ID: 4923

$0.95

In stock

Adafruit MONSTER M4SK - DIY Electronic Eyes Mask

Product ID: 4343

Peep dis! Have you always wanted to have another pair of eyes on the back of your head? Or outfit your costume with big beautiful orbs? The MONSTER M4SK is like the Hallowing but twice as good, with two gorgeous 240x240 pixel IPS TFT displays, driven by a 120MHZ Cortex M4 processor that can pump out those pixels super fast. You'll get the same quality display as our...

$44.95

43 in stock

Adafruit Prop-Maker Starter Kit - Make your own Lightsaber!

Product ID: 4860

Szoom woom woom! Use the force and Adafruit Feather to build a battle-grade lightsaber! If you can't make the hyperspeed jump to Ilum for your Jedi rite of passage, the Adafruit Prop-Maker Starter Kit is perfect for making your very own 3D-printed NeoPixel Lightsaber. It contains practically everything but the khyber crystal, and you get 25% off the price of...

$54.95

74 in stock

STEMMA Wired Potentiometer Breakout Board - 10K ohm Linear

Product ID: 4493

For the easiest way possible to measure twists, turn to this STEMMA potentiometer breakout (ha!). This plug-n-play pot comes with a JST-PH 2mm connector and a matching JST PH 3-Pin to Male Header Cables - 200mm, so wiring up is a cinch. Simply plug the cable in, then use the black wire to connect to your ground, white wire to the input/signal pin, and the red wire to...

$3.95

In stock

Adafruit FunHouse - WiFi Home Automation Development Board

Product ID: 4985

Home is where the heart is...it's also where we keep all our electronic bits. So why not wire it up with sensors and actuators to turn our house into an electronic wonderland. Whether it's tracking the environmental temperature and humidity in your laundry room, or notifying you when someone is detected in the kitchen, to sensing when a window was left open, or...

$34.95

In stock

Angled shot of Adafruit LED Glasses Driver.

Adafruit LED Glasses Driver - nRF52840 Sensor Board

Product ID: 5217

This board is designed to be a thin, bluetooth-enabled driver board for our Adafruit LED Glasses RGB LED matrix. That said, it's a perfectly good stand-alone development board for the Nordic nRF52840 chipset, with a very slim design, optional LiPo battery support, a few sensors, and a Stemma QT port for adding other devices or sensors with I2C plug-and-play. The...

$24.95

In stock

Adafruit 8x8 NeoTrellis Feather M4 Kit Pack

Product ID: 1929

We've upgraded our popular UNTZtrument with a total make-over, and it's been reborn as the NeoTrellis 8x8 Kit pack. This open-source 8x8 Grid Controller Kit with a super-specifically-laser-cut enclosure turns four panels of 4x4 NeoTrellis's into a handheld Feather M4 Express-powered light/music maker! Perfect for your next cool interface, MIDI instrument, control...

$89.95

In stock

Adafruit HalloWing M4 Express - ORANGE HALLOWEEN EDITION!

Product ID: 4300

This is Hallowing..this is Hallowing... Hallowing! Hallowing! Following up on 2018's most-successful-skull-shaped development board, we UPPED our -skull-shaped development board game, and re-spinned (re-spun?) the HalloWing M0 into the HalloWing M4 with MORE of everything that makes this the spoooookiest dev board. New! For October 2019, we're got limited edition...

$39.95

In stock