You'll find these handy 2-pin 0.1" spacing pig-tails to be quite helpful when wiring up your project. The connector end snaps cleanly into 0.1" spaced header (and fits neatly side by side on 0.1" spacing as well). We think this would be especially useful when paired with our PWM driver breakout, to control 16 PWM LEDs that are wired, but there's probably a dozen other uses. Come in a pack of four cables, 12 inches long,...

This 4-wire cable is a little over 150mm / 6" long and fitted with JST-PH female 4-pin connectors on each end. These types of JST cables are commonly found on small rechargeable battery packs, RC receivers and transmitters, tiny cameras, and other small electronic devices We're using these to connect to STEMMA boards, the connector is compact yet durable, stays connected even when moved around, but clicks easy to insert & remove. We...

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to be able to deal with a lot of bending. Comes with 2m of black wire. The wire is 26AWG stranded with an outer diameter of 1.5mm.

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to be able to deal with a lot of bending. Comes with one 25ft spool of  black  wire. The wire is 26AWG stranded with an outer diameter of 1.5mm.

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to be able to deal with a lot of bending. Comes with one 25ft spool of white  wire. The wire is 26AWG stranded with an outer diameter of 1.5mm.

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to be able to deal with a lot of bending. Comes with 2m of red wire. The wire is 26AWG stranded with an outer diameter of 1.5mm.

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to be able to deal with a lot of bending. Comes with one 25ft spool of  red wire. The wire is 26AWG stranded with an outer diameter of 1.5mm.

For those who are fans of our silicone-covered wires, but are always looking to up their wiring game . We now have Silicone Cover Ribbon cables! These may look a lot like squid ink noodles, but they're not. The silicone-sheathed wire is super-flexible and soft, and it's also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it...

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to be able to deal with a lot of bending. Comes with 2m of yellow wire. The wire is 26AWG stranded with an outer diameter of 1.5mm.

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to be able to deal with a lot of bending. Comes with 2m of blue wire. The wire is 26AWG stranded with an outer diameter of 1.5mm.

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to be able to deal with a lot of bending. Comes with one 25ft spool of yellow  wire. The wire is 26AWG stranded with an outer diameter of 1.5mm.

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to be able to deal with a lot of bending. Comes with one 25ft spool of  blue  wire. The wire is 26AWG stranded with an outer diameter of 1.5mm.

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to be able to deal with a lot of bending. Comes with 2m of green wire. The wire is 26AWG stranded with an outer diameter of 1.5mm.

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to be able to deal with a lot of bending. Comes with 2m of orange wire. The wire is 26AWG stranded with an outer diameter of 1.5mm.

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to be able to deal with a lot of bending. Comes with 2m of grey wire. The wire is 26AWG stranded with an outer diameter of 1.5mm.

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to be able to deal with a lot of bending. Comes with one 25ft spool of  gray  wire. The wire is 26AWG stranded with an outer diameter of 1.5mm.

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to be able to deal with a lot of bending. Comes with one 25ft spool of orange  wire. The wire is 26AWG stranded with an outer diameter of 1.5mm.

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to be able to deal with a lot of bending. Comes with one 25ft spool of  green  wire. The wire is 26AWG stranded with an outer diameter of 1.5mm.

Silicone-sheathing wire is super-flexible and soft, and it's also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to be able to deal with a lot of bending. Comes with 2m of black, red, blue, green, grey, orange, or yellow wire. The wire is 26AWG stranded with an...

Spring terminal blocks will simplify your wiring and make your project more rugged. Instead of soldering wires to your perf board, solder in these 0.1" pitch terminal blocks. There's a little spring contact so you can pull back on the plastic bit and slip in your 20 to 26 AWG solid or stranded-core wires. Each terminal block is electrically isolated from those next to it. Each block also has two solder pins per contact for strong...

Spring terminal blocks will simplify your wiring and make your project more rugged. Instead of soldering wires to your perf board, solder in these 0.1" pitch terminal blocks. There's a little spring contact so you can pull back on the plastic bit and slip in your 20 to 26 AWG solid or stranded-core wires. Each terminal block is electrically isolated from those next to it. Each block also has two solder pins per contact for strong...

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to be able to deal with a lot of bending. Comes with 2m of white wire. The wire is 26 AWG stranded with an outer diameter of 1.5mm

We've upgraded our basic 'adjustable' wire strippers to these multi-sized wire strippers. They include: 20-30 AWG strippers, wire cutters, 'plier' tips, and a wire loop. Ground blades for precision cutting. Spring return, comfy molded handles and a closing-lock. Great for general usage, we use them for standard 22 AWG solid-core breadboarding wire and 26 AWG stranded ribbon cable, sometimes for other thin wires like thicker...

For those who are fans of our silicone-covered wires, but are always looking to up their wiring game . We now have Silicone Cover Ribbon cables! These may look a lot like squid ink noodles, but they're not. The silicone-sheathed wire is super-flexible and soft, and it's also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it...

For those who are fans of our silicone-covered wires, but are always looking to up their wiring game . We now have Silicone Cover Ribbon cables! These may look a lot like squid ink noodles, but they're not. The silicone-sheathed wire is super-flexible and soft, and it's also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it...

This wire is flexible, strong, and super easy to solder, too! Stranded core wire is best used for wiring jigs where theres bending or movement expected. Works well with terminal blocks as well. It's not great for use with breadboards (without tinning) For prototyping with breadboards, perfboards, and terminal blocks check out our solid-core wires. Comes with one 25ft spool of black wire. The wire is 22AWG stranded with an outer diameter...

This wire is flexible, strong, and super easy to solder, too! Stranded core wire is best used for wiring jigs where theres bending or movement expected. Works well with terminal blocks as well. It's not great for use with breadboards (without tinning) For prototyping with breadboards, perfboards, and terminal blocks check out our solid-core wires. Comes with one 25ft spool of red wire. The wire is 22AWG stranded with an outer diameter...

This wire is flexible, strong, and super easy to solder, too! Stranded core wire is best used for wiring jigs where theres bending or movement expected. Works well with terminal blocks as well. It's not great for use with breadboards (without tinning) For prototyping with breadboards, perfboards, and terminal blocks check out our solid-core wires. Comes with one 25ft spool of white wire. The wire is 22AWG stranded with an outer diameter...

This wire is flexible, strong, and super easy to solder, too! Stranded core wire is best used for wiring jigs where theres bending or movement expected. Works well with terminal blocks as well. It's not great for use with breadboards (without tinning) For prototyping with breadboards, perfboards, and terminal blocks check out our solid-core wires. Comes with one 25ft spool of green wire. The wire is 22AWG stranded with an outer diameter...

This wire is flexible, strong, and super easy to solder, too! Stranded core wire is best used for wiring jigs where theres bending or movement expected. Works well with terminal blocks as well. It's not great for use with breadboards (without tinning) For prototyping with breadboards, perfboards, and terminal blocks check out our solid-core wires. Comes with one 25ft spool of blue wire. The wire is 22AWG stranded with an outer diameter...

This wire is flexible, strong, and super easy to solder, too! Stranded core wire is best used for wiring jigs where theres bending or movement expected. Works well with terminal blocks as well. It's not great for use with breadboards (without tinning) For prototyping with breadboards, perfboards, and terminal blocks check out our solid-core wires. Comes with one 25ft spool of yellow wire. The wire is 22AWG stranded with an outer...

This wire is flexible, strong, and super easy to solder, too! Stranded core wire is best used for wiring jigs where theres bending or movement expected. Works well with terminal blocks as well. It's not great for use with breadboards (without tinning) For prototyping with breadboards, perfboards, and terminal blocks check out our solid-core wires. Comes with one 25ft spool of violet wire. The wire is 22AWG stranded with an outer...

This wire is super-flexible, soft, strong, and super easy to solder, too! Stranded core wire is best used for wiring jigs where theres bending or movement expected. Works well with terminal blocks as well. It's not great for use with breadboards (without tinning) For prototyping with breadboards, perfboards, and terminal blocks check out our solid-core wires. Comes with one 25ft spool of  gray  wire. The wire is 22AWG stranded...

This wire is flexible, strong, and super easy to solder, too! Stranded core wire is best used for wiring jigs where theres bending or movement expected. Works well with terminal blocks as well. It's not great for use with breadboards (without tinning) For prototyping with breadboards, perfboards, and terminal blocks check out our solid-core wires. Comes with one 25ft spool of orange wire. The wire is 22AWG stranded with an outer...

This wire is flexible, strong, and super easy to solder, too! Stranded core wire is best used for wiring jigs where theres bending or movement expected. Works well with terminal blocks as well. It's not great for use with breadboards (without tinning) For prototyping with breadboards, perfboards, and terminal blocks check out our solid-core wires. Comes with one 25ft spool of brown wire. The wire is 22AWG stranded with an outer diameter...

This is a box of six  25ft   spools of stranded-core wire. Stranded-core wire is best used for wiring jigs where there's bending or movement expected. It also works well with terminal blocks. It's  not  great for use with breadboards (without tinning). The wire is easy to solder to, and when bent it keeps its shape pretty well. We like to have a few spools of this stuff around which is why this set is quite nice!...

This is a box of  ten  25ft   spools of stranded-core wire. Stranded-core wire is best used for wiring jigs where there's bending or movement expected. It also works well with terminal blocks. It's  not  great for use with breadboards (without tinning). The wire is easy to solder to, and when bent it keeps its shape pretty well. We like to have a few spools of this stuff around which is why this set is quite...

These Banana Plugs not only look great, they're also solder-free and stackable ! Banana plugs are often used on test equipment, tools, synthesizers and other electronic patch panels. Each connector is designed with bowed strips to provide secure and uniform contact between the plug and jack. Even after multiple insertions, the non-collapsing design stays true to form. The plug springs are nickel-plated Beryllium copper and will...

This spool of solid-core wire is easily soldered to and can handle up to 200°C and 600V. We like this wire because it's flexible but also holds its shape. We love the sturdiness and reliability for prototyping and use these all the time in breadboards, perfboards, and in terminal blocks. For wearables or projects where the wire-harness has to be able to deal with a lot of bending, check out our stranded-core wires....

This spool of solid-core wire is easily soldered to and can handle up to 200°C and 600V. We like this wire because it's flexible but also holds its shape. We love the sturdiness and reliability for prototyping and use these all the time in breadboards, perfboards, and in terminal blocks. For wearables or projects where the wire-harness has to be able to deal with a lot of bending, check out our stranded-core...

This spool of solid-core wire is easily soldered to and can handle up to 200°C and 600V. We like this wire because it's flexible but also holds its shape. We love the sturdiness and reliability for prototyping and use these all the time in breadboards, perfboards, and in terminal blocks. For wearables or projects where the wire-harness has to be able to deal with a lot of bending, check out our stranded-core...

This spool of solid-core wire is easily soldered to and can handle up to 200°C and 600V. We like this wire because it's flexible but also holds its shape. We love the sturdiness and reliability for prototyping and use these all the time in breadboards, perfboards, and in terminal blocks. For wearables or projects where the wire-harness has to be able to deal with a lot of bending, check out our stranded-core wires....

This spool of solid-core wire is easily soldered to and can handle up to 200°C and 600V. We like this wire because it's flexible but also holds its shape. We love the sturdiness and reliability for prototyping and use these all the time in breadboards, perfboards, and in terminal blocks. For wearables or projects where the wire-harness has to be able to deal with a lot of bending, check out our stranded-core wires....

This spool of solid-core wire is easily soldered to and can handle up to 200°C and 600V. We like this wire because it's flexible but also holds its shape. We love the sturdiness and reliability for prototyping and use these all the time in breadboards, perfboards, and in terminal blocks. For wearables or projects where the wire-harness has to be able to deal with a lot of bending, check out our stranded-core wires....

This spool of solid-core wire is easily soldered to and can handle up to 200°C and 600V. We like this wire because it's flexible but also holds its shape. We love the sturdiness and reliability for prototyping and use these all the time in breadboards, perfboards, and in terminal blocks. For wearables or projects where the wire-harness has to be able to deal with a lot of bending, check out our stranded-core...

Build and customize your very own open-source button grid controller based on the Adafruit Trellis with the UNTZtrument kit HELLA UNTZtrument KIT ! Designed by PaintYourDragon, this DIY kit comes with delicious translucent button pads, controller pads, diffused white LEDS and a custom laser cut enclosure. The result is a sturdy, BIG , and elegant but also super-hackable music or video (or something else???) controller device. We designed...

Build and customize your very own open-source button grid controller based on the Adafruit Trellis with the UNTZtrument kit! Designed by PaintYourDragon, this DIY kit comes with delicious translucent button pads, controller pads, diffused white LEDS and a custom laser cut enclosure. The result is a sturdy and elegant but also super-hackable music or video (or something else???) controller device We designed this kit for ease of use and ultimate...

One truth about working with audio is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block audio connectors so much. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs. This is the 3.5mm (1/8") Stereo Audio Plug Terminal Block . It's the most common size and style of audio connector, used in most headphones or...

If you need to connect an RJ45 cable (a.k.a Ethernet) to a board that with an Ethernet Jack - this adapter will come in very handy! No soldering required. Just use a slim screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire and re-tighten. Note that these aren't recommended for actual Ethernet traffic, especially long term...but for basic power/data distribution, RJ45's are great! This is the Ethernet...

One truth about working with A/V is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block RCA connectors so much. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs. This is the RCA (Composite Video, Audio) Male Terminal Block . RCA is one of the most common A/V connectors. We also have a (matching) RCA Female Jack Terminal...

One truth about working with audio is you always need the cable or adapter you  don't  have in your toolbox. That's why we love these terminal-block audio connectors so much.  No soldering required!  Use stranded or solid core wire and a small screw driver to create custom wiring jigs. This is the 3.5mm (1/8") 4-Pole (TRRS)  Audio Jack Terminal Block . TRRS stands for Tip, Ring, Ring, Sleeve. It has...

One truth about working with audio is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block audio connectors so much. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs. This is the 3.5mm (1/8") Stereo Audio Jack Terminal Block . It's the most common size and style of audio connector, used in most headphones or basic...

This is the  USB-A Male Plug to 5-pin Terminal Block . If you need to connect to a device with a USB Jack, maybe make your own USB stick or custom cable of sorts - this adapter will come in very handy!  No soldering required.  Just use a small screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire, and re-tighten. The terminal block itself is removable from the body. It's more durable than...

Make your next custom USB cable a breeze with a USB Micro B Male Plug to 5-pin Terminal Block . If you need to connect to a device with a micro USB plug or maybe make your own USB OTG device or custom cable of sorts - this adapter will come in very handy:  no soldering required!  Just use a small screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire, and re-tighten. All the pins are...

Make your next custom USB cable a breeze with a Micro USB Female Socket to 5-pin Terminal Block . If you need to connect to a device with a micro USB plug or maybe make your own USB OTG device or custom cable of sorts - this adapter will come in very handy: no soldering required!  Just use a small screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire, and re-tighten. All the pins are labeled, which is...

One truth about working with A/V is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block RCA connectors so much. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs. This is the RCA (Composite Video, Audio) Female Jack Terminal Block . RCA is one of the most common A/V connectors. We also have a (matching) RCA Male Plug...

Make your next custom USB cable a breeze with a  USB Mini B Female Socket to 5-pin Terminal Block . If you need to connect to a device with a mini USB plug or maybe make your own USB OTG device or custom cable of sorts - this adapter will come in very handy:  no soldering required!  Just use a small screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire, and re-tighten. All the pins are...

Make your next custom USB cable a breeze with a USB Mini B Male Plug to 5-pin Terminal Block . If you need to connect to a device with a mini USB socket or maybe make your own custom cable of sorts - this adapter will come in very handy: no soldering required!  Just use a small screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire, and re-tighten. All the pins are labeled, which is really nice because we...

These 4-wire cables are 15cm long and come as a set, one side has a JST SM type connector plug on the end. The other side has a matching JST SM type receptacle connector. They are good for whenever you have 4 wires you want to be able to plug and unplug. We like the solid and compact nature of these connectors and the latch that keeps the cable from coming apart easily. For more information, check the JST SM connector datasheet Our digital...

This lightweight, flexible fabric ribbon channel contains four individual wires, perfect for wiring up wearables where flexibility is key. This ribbon has 4 x 28AWG stranded-core wires, easy to solder but also quite flexible. There's no risk of accidental shorts since each wire is sleeved, and you can also pass a fair bit of current Features: Ultra-low resistance: ~0.25 Ω / m 4 Conductor connections Power and data applications Sewable...