USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi
QTY | DISCOUNT |
1-9 | $9.95 |
10-99 | $8.96 |
100+ | $7.96 |
-
Description
Description-
The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<->Serial conversion chip and at the end of the 36" cable are four wire - red power, black ground, white RX into USB port, and green TX out of the USB port. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chipsets.
Because of the separated pin plugs, this cable is ideal for powering and connecting up to the debug/login console on the Raspberry Pi or BeagleBone Black. Connect the pins as shown to power the Pi or BBB and establish the RX/TX link.- If you are running Windows 7/8/10 etc, check this tutorial page with links to drivers for both PL2303 and CP2102
- If you are running Mac OS X, check this tutorial page with links to drivers for both PL2303 and CP2012
- If you are running Linux, drivers are already included in the kernel, no need to install anything!
Also handy for hacking WiFi routers to install alternate OS's, or nearly any other 3.3V logic serial port. This is easier to use than an FTDI cable in many cases because the wires are separated. Note that we call this a "TTL cable" (since that's what they're called) but technically it's CMOS logic.
This cable is not good for Arduino re-programming such as a Boarduino, MENTA, Monochron, etc. because it does not have the DTR/RTS wire necessary for initiating the bootloader reboot sequence. For that we suggest an FTDI cable or FTDI friend. -
Technical Details
Technical Details+
There are four wires: red power, black ground, white RX into USB port, and green TX out of the USB port.
The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chipsets.- If you are running Windows 7/8/10 etc, check this tutorial page with links to drivers for both PL2303 and CP2102
- If you are running Mac OS X, check this tutorial page with links to drivers for both PL2303 and CP2012
- If you are running Linux, drivers are already included in the kernel, no need to install anything!
- PL2303HX.D datasheet
- PL2303TA datasheet
- CP210X Serial Communication Guide
- SiLabs CP210X product pages
Revision History
- Prior to July 1 2014 this cable would come with a PL2303HX chipset and a black USB body. After July 1, 2014 we changed to a violet body and the PL2303TA chipset. The new 'TA cables are Win8 compatible, and are more reliable especially when dealing with random USB-disconnects.
- As of Dec. 21, 2016 we will be shipping cables with SiLabs CP2012 chipset instead of Prolific. SiLabs chips seem to have better driver stability, and can handle very high speeds and 'unusual' non-standard baud rates. Other than the driver installation, the cables perform identically.
-
Learn
Learn+
Get you a Pi & write you some javascript!All the joy of Chumby, with extra chewy breakouts!Adorable bite-sized WiFi microcontroller, at a price you like!Learn how to Connect to your Raspberry Pi with a Console CableUsing the ESP8266 as a microcontroller as well as a low cost wifi server.Adding GPS tracking to your Linux based projectsHow to disassemble an Amazon Dash button and reprogram its STM32 processor!Use a tiny composite video display with a Raspberry PiGo Go Gadget Pi ZeroThere, under a rock! Its a gaggle of COM ports!Give your Pi Zero or Zero W the spark of new life.Make the most adorable little WiFi routerCommunicate to other electronics via serial on your Circuit Playground ExpressMake a Raspberry Pi into a Anonymizing Tor Proxy!Use RPI with a bonnet and RGB LED Matrix to get your timing rightUse a Raspberry Pi to control & monitor your USB bitcoin minersConnect Raspberry Pi with Google GlassAds? What Ads?Use a Trinket or Gemma to determine the IR codes from your remote and use the codes in your own program to trigger eventsIntroducing Bluefruit EZ-Key, the easiest way to create a wireless keyboardTrack your USB juice use!Calibrate sensors on GEMMA and Trinket!It's only WAFER thin!An introduction to the interface at the heart of Linux & Unix systems.
MAY WE ALSO SUGGEST...
MAY WE ALSO SUGGEST...-
-
Distributors+
See our Distributors page for a complete list of distributors.