Turn your iPhone 4S into a black monolith - great for when you want a sleek minimal look. This kit comes with a shiny black plastic back and two basic screwdrivers (one pentalobe, one phillips - use whichever your phone has) to remove the back and replace it.
Replacing the back of an iPhone is a 5 minute project. Simply remove the two screws next to the dock connector, slide the old back off, and slide the new one on. Replace the two screws and you're done! This is one of the easiest mods you can do to your cellphone.
Adafruit NeoPixel Digital RGB LED strips come to us in 4 or 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires as shown in the pic below. If you order a full 4 or 5 meters, you get the full reel with both connectors installed (like the pic below).
If you buy less than a full reel, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!