USB cable - 6" A/MicroB
-
Description
Description-
This here is your standard A-microB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your NETduino, Arduino Leonardo, Raspberry Pi (among other things).
Approximately 6.5" long from end to end, its a little more compact than our classic 3' long cable
We had these made to our specifications, available in Adafruit Black -
Technical Details
Technical Details+
-
Learn
Learn+
Bring a nice compact HDMI monitor to your next projectMapped for Livestream Studio, switch streams with big ole buttonsAdd a tractor beam to your droneUse CircuitPython and the Gemma M0 to control iPad pinball built into an extruded aluminum mini table!
Turn a Gemma M0 into a combination Morse code keyer and transmitter!
Build an ultraviolet secret message decoder
Hide this noisemaker and wait for your victims to go bonkers!
Masquarede as a USB keyboard while sending commands to any computer!
Nobody better touch your stuff when you've got it protected with a vibration switch and Gemma M0
Make a USB prank device using a Gemma M0 that will wiggle your victim's cursor every once and a while! Coded in MakeCode.
Spy themes are just cool. Code songs in MakeCode or CircuitPython so you can have one at the ready at all times!
MAY WE ALSO SUGGEST...
MAY WE ALSO SUGGEST...-
-
Distributors+
See our Distributors page for a complete list of distributors.
Ordering full reels vs. cut reels
Adafruit NeoPixel Digital RGB LED strips come to us in 4 or 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires as shown in the pic below. If you order a full 4 or 5 meters, you get the full reel with both connectors installed (like the pic below).
If you buy less than a full reel, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!
