3 x AAA Battery Holder with On/Off Switch and 2-Pin JST
| QTY | DISCOUNT |
| 1-9 | $1.95 |
| 10-99 | $1.76 |
| 100+ | $1.56 |
-
Description-
Description
This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim, and 3 AAA's add up to about 3.3-4.5V, a very similar range to Lithium Ion/polymer (Li-Ion) batteries and have an on-off switch. That makes them ideal for use with 3.3V projects that have a 2-pin JST connector meant for one of our Li-Ion/Poly batteries. (Of course, you can't recharge them like Li-Ion/Polys, so don't try to plug this into one of our Li-Ion/Poly charger boards!)
Fits any standard AAA battery. When using rechargeable NiMH the output voltage will range from about 3.7V with charged batteries to 2.7V at the end of life with a nominal voltage of 3.6V. When using alkalines, the output will range from 4.6V with new batteries to 3.3V at the end of life with a nominal voltage of about 4.5VUse this battery holder when you want to have rechargable batteries with a micro:bit as 2 x NiMH is not enough voltage to reliably run it, you need 3!
The polarity matches that of our 2-pin JST cable and Li-Ion/Poly batteries. Uses a genuine JST connector so it wont 'catch and tear' in JST connectors. -
Technical Details+
Technical Details
Box Dimensions: 2.5" x 1.45" x 0.62"
Cable: 6" long, terminated with a genuine JST-PH 2 pin connector
-
Learn+
Learn
Make glowy slime for fun projects!Create an ultra-low-cost boat that automatically starts swimming when dropped in the water
Use the accelerometer tilt to control lights and sound on this fun flying saucer made with CircuitPythonSEE ALL GUIDES
Wear your punchlines
MAY WE ALSO SUGGEST...
MAY WE ALSO SUGGEST...-
-
Distributors+
See our Distributors page for a complete list of distributors.
