Half Sized Premium Breadboard - 400 Tie Points

Product ID: 64
$4.95
Qty Discount
1-9 $4.95
10-99 $4.46
100+ $3.96

Description

This is a cute, half-size breadboard with 400 tie points, good for small projects. It's 3.25" x 2.2" / 8.3cm x 5.5cm with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails off easily to make the breadboard as thin as 1.4" (3.5cm). You can also "snap" these breadboards together, either way, to make longer and/or wider breadboards. The back is made of foam double-sided tape, if you remove the protective paper you can attach it to a flat clean surface.

As of June 10, 2022 - This half-size breadboard has been updated to Premium, making plugging and unplugging boards and headers a buttery-smooth operation thanks to upgraded spring clips. Updated design also includes a metal plate. The metal plate is used to stick the breadboard on for mechanical support, and to keep the paper on the bottom from coming loose and sticking to things. secondly it provides a small amount of shielding to your circuits, and if you connect an alligator clip from it to earth/ground you will get an earthed shielding as well.

Play video: Breadboard Jumpering - Collin’s Lab Notes #adafruit #collinslabnotes

Play video: When to use a breadboard - Collin’s Lab Notes #adafruit #collinslabnotes

Play video: Mind the Breadboard Gap - Collin’s Lab Notes #adafruit #collinslabnotes

Play video: New Products 6/15/2022 Featuring Half Sized Premium Breadboard - 400 Tie Points!

Technical Details

Dimensions:

  • 82.6mm x 55mm / 3.25" x 2.2"
  • 9.3mm / 0.37" thick, including sticky foam on the bottom
  • Weight: 38g / 1.34oz

Revision History:

  • As of January 19, 2023 - This half-size breadboard now comes in white with a red+black silkscreen.
  • As of June 10, 2022 - This half-size breadboard has been updated to Premium, making plugging and un-plugging boards and headers a buttery-smooth operation thanks to the upgraded spring clips. Updated design also includes a metal plate. The metal plate is used to stick the breadboard on for mechanical support, and to keep the paper on the bottom from coming loose and sticking to things. secondly it provides a small amount of shielding to your circuits, and if you connect an alligator clip from it to earth/ground you will get an earthed shielding as well.

 

 

RoHS 2 2011 65 EU Compliant
RoHS 2 2015 863 EU Compliant

Learn

CdS Cells, Photoresistors, & Light Dependent Resistors (LDR)
Reading temperatures to 0.1 degree precision!
Securely hold your Arduino next to a breadboard
See All Guides