Mini Sparkle Motion - WLED-friendly ESP32 NeoPixel LED Driver

Product ID: 6160
$16.95
Qty Discount
1-9 $16.95
10-99 $15.26
100+ $13.56

Description

The Adafruit Sparkle Motion Mini is part of our series of "Sparkle Motion" boards, that are our attempt to make the best small WLED-friendly smart LED driving board in the whole world. Our resident mermaid, firepixie makes a lot of projects with WLED and she loves it! So how can we make something that will be powerful enough to drive advanced LED projects that need a compact design?

The Mini version of the Sparkle Motion is a simpler version of our full-featured Sparkle Motion, we give up the high voltage support and built in IR receiver, in order to make it under 1 square inch in size! By using a 4-layer board and double-sided assembly we've put together this feature set:

  • Power via USB Type C for up to 5V 4A input - you can use off-the-shelf USB battery packs for portable operation.
  • 4 Amp resetting fuse to protect from over-current drive
  • ESP32 mini module with built in antenna port - the classic ESP32 has the best WLED support even if we'd prefer the 'S2 or 'S3. Comes with 4 MB of flash, dual core 240MHz Tensilica, WiFi, Bluetooth LE and Bluetooth Classic support.
  • USB-serial converter with auto-reset
  • Two output signals plus 5V power and ground - both signal output are level shifted to 5V. These are on 0.1" spaced breakout pads. To keep the design slim we don't include terminal blocks pre-soldered, but we do stock the matching blocks if you want them
  • Extra 2x3 0.1" breakout pads with 4 more GPIO plus 3V power and ground.
  • Built-in I2S microphone
  • Stemma QT I2C port to connect external sensors/OLED/etc
  • User button on GPIO 0 plus Reset button
  • Red built-in LED on pin 12
  • Small built-in NeoPixel on pin 18 
  • Separate analog/digital input JST port for analog input, potentiometer, microphone or external IR receiver on pin 13
  • Compact enough you can use it for wearable projects - 1.2"x0.8" / 30mm x 20mm size with mounting holes

While we recommend it for use with WLED, it will also work just fine as a compact ESP32 board for use with Arduino, ESP-IDF, MicroPython, CircuitPython or any other ESP32 supported codebase. 

Note that unlike the classic Sparkle Motion board, we don't include terminal blocks pre-soldered to keep the board very slim. We do stock the matching blocks if you want them, a small amount of soldering is required to attach them. Also, unlike the bigger version, we dropped the on-board IR receiver - however its easy to add one by plugging in a JST SH 3-pin socket cable and slotting in an IR receiver module.

 

Play video: #NewProducts 1/15/25 Feat @Adafruit Mini Sparkle Motion - WLED-friendly ESP32 NeoPixel LED Driver

Technical Details

Product Dimensions: 31.6mm x 19.8mm x 7.3mm / 1.2" x 0.8" x 0.3"

Product Weight: 3.1g / 0.1oz

RoHS 2 2011 65 EU Compliant
RoHS 2 2015 863 EU Compliant

Learn

Get up and running with your Sparkle Motion Mini Board
Get setup to transfer your serial data over USB
Adorn yourself in Magical Moving Lights