Seeed Wio Terminal

PRODUCT ID: 4707
$42.50
  • Description-

    Description

    Instead of being a single embedded functional module, Wio Terminal is more of a complete system equipped with Screen + Development Board + Input/Output Interface + Enclosure. Because it uses the SAMD51, it is compatible with Arduino and CircuitPython - using the same Arduino & CircuitPython core we have developed here at Adafruit!

    Wio Terminal is an ATSAMD51-based microcontroller with wireless connectivity supported by Realtek RTL8720DN. Its CPU speed runs at 120MHz (boost up to 200MHz). Realtek RTL8720DN chip supports both Bluetooth and Wi-Fi providing the backbone for IoT projects. The Wio Terminal itself is equipped with a 2.4” LCD Screen, onboard accelerometer (LIS3DHTR), microphone, buzzer, microSD card slot, light sensor, and infrared emitter (IR 940nm). On top of that, it also has two x JST PH 4-pin STEMMA / Grove ports for Grove Ecosystem and 40-pin compatible GPIO for more Raspberry Pi add-ons.

    Highly Integrated Design

    • MCU, LCD, WIFI, BT, IMU, Microphone, Buzzer, microSD Card, Configurable Buttons, Light Sensor, 5-Way Switch, Infrared Emitter (IR 940nm), Crypto-authentication Ready
    • Well-designed enclosure with built-in magnets and two mounting holes, allowing you to set up your IoT project without hassle

    Powerful MCU - Microchip ATSAMD51P19

    • ARM Cortex-M4F core running at 120MHz using Adafruit core support for Arduino and CircuitPython
    • 4 MB External Flash, 192 KB RAM
    • Comprehensive Protocol Support
    • SPI, I2C, I2S, ADC, DAC, PWM, UART(Serial)

    Reliable Wireless Connectivity

    • Powered by Realtek RTL8720DN
    • Dual Band 2.4Ghz / 5Ghz Wi-Fi (802.11 a/b/g/n)
    • BLE / BLE 5.0

    USB OTG Support

    • Accessible Devices (as USB-Host): read data or signals from a mouse, keyboard, MIDI devices, Xbox/PS gaming controllers, 3D printers
    • Simulated Devices (as USB-Client): emulate a mouse, keyboard or MIDI devices to Host PC
    • When using USB Host/Client function, you can use the 40-pin on the back of Wio Terminal for power supply. Check here for detailed instructions.

    External Sensor Ports

    • Two onboard multi-functional Grove ports can be used for Digital, Analog, I2C, and PWM
    • To connect STEMMA QT sensors with Wio Terminal, please use a JST PH 4-pin STEMMA / Grove cable.

    Raspberry Pi 40-pin Compatible

    • Can be mounted to a Raspberry Pi as a slave device
    • Raspberry Pi's HAT can be used with an adapter cable

    Software Support

  • Technical Details+

    Technical Details

    For all tech support, please visit their wiki for more information about Wio Terminal. If you have any questions, visit the Forum!

    RoHS 2 2011 65 EU Compliant
    RoHS 2 2015 863 EU Compliant

MAY WE ALSO SUGGEST...