The latest addition to Spresense's hardware ecosystem is the Spresense Camera Board that connects directly to the main board’s camera interface.
The Spresense camera board has the Sony ISX012 image sensor mounted with a lens. The Sony ISX012 has an effective pixel count of 5.11M pixels and an onboard encoder that can acquire pictures in JPEG, RAW, Y/C or RGB format.
More on the Sony ISX012 image sensor:
Sensor type: 1/4 type CMOS image sensor
Effective pixel: 5.11M pixels
Recording pixel: 5.04M pixels
ISO sensitivity: ISO 40～800
Scene selection: 12 preset
Exposure control mode: Auto, Shutter priority, ISO sensitivity priority, Long time AE
Photometry: Multi pattern, Center weight, Average, Spot
Exposure compensation: ±2EV, 1/3 EV steps
Shutter speed range: 1/8 s (long AE mode) to 1/42000 s
White balance: Auto, Daylight, Cloud, Fluorescent, Lamp
Focus control: Auto, Single AF, Continuous AF, Manual control
Output still picture format: JPEG(4:2:2), Y/Cb/Cr, YUV, RGB, RAW, JPEG+YUV(thumbnail)
Still data rate: 5M pixel 15 frame/s JPEG output
Movie data rate: SVGA 30 frame/s YCbCr output
HD movie support: 1080p(1920×1030 30 frame/s), 720p(1208×720 60 frame/s) JPEG output, JPEG+YCbCr output
Adafruit NeoPixel Digital RGB LED strips come to us in 4 or 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires as shown in the picture below. If you order a full 4 or 5 meters, you get the full reel with both connectors installed.
If you buy less than a full reel, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!