USB C Powered Soldering Iron - Adjustable Temperature Pen-Style - TS80P
Product Images and Video
The TS80 is a chic and smart soldering iron powered by USB Type-C and QC3.0 standard input. Normally we'd scoff at trying to power a soldering iron off of USB, but thanks to the new USB C standard, the power plug that's included is a 9V 2A so you get a reasonable ~20 Watts of power. So, this is the first USB iron we would feel comfortable stocking, its a nice iron, good enough for every-day use. We dig the slim pen iron (so comfortable to hold), adjustable temperature (oooh there's a OLED screen!), durable grounding cord, and fast heat-up (about 22 seconds)!
Comes equipped with an OLED screen, so you can keep an eye on the temperature. With a built-in STM32 chip, it can control the rise and fall of tip temperature, and it features sleep, automatic power-off, and other modes. The code application layer is open source; you can develop firmware for the soldering iron. You can even customize the boot up screen with your own 96x16 pixel BMP image!
When you don't need a full soldering 'battle station', this pen-type iron will work well, either on a bench-top or in a tool box. It can handle any task you throw at it, and the handy buttons set the temperature. Once the soldering is complete and the iron has cooled off, you can easily coil it up to keep your work space clean and tidy.
This soldering iron has an adjustable temperature range from 100ºC to 400ºC. For most lead-free soldering, try 400°C. For lead-based solder, 350°C will do. Adjust as necessary! It may not be as powerful or easy-to-use as the full stand-up Hakko, but it is a lot more portable. We also carry a soldering iron stand (and a deluxe model as well) in case you want to keep it from rolling around your desk.
The soldering tip is connected via a 3.5mm push-in plug, making replacing tips super easy. The tip it comes with is a nice SMT conical screwdriver tip for SMT and some smaller THM work. Note that the tip is not Hakko-compatible!
Kit also includes USB C power supply, the tiniest Allen wrench for attaching the optional grounding clip, and said grounding clip. You must use the included USB power supply to power the soldering iron! It can't be powered from a computer USB port, but you can use the included USB power supply to charge your other devices.
- Temperature Range: 100℃ - 400℃ / 212ºF - 752ºF
- Power Input: 9 or 12V/2A (QC 3.0)
- Power: 18W
- Data/Power Interface: USB Type-C
- Temperature stability: ±3%
- OLED Display
- Soldering iron: 96mm
- Tip: 60+40mm
- Weight: 36.5g (power adaptor not included)
- Certifications: CE, FCC
- Firmware link
- Alternative open-source hackable firmware!
- As of July 15, 2020 we now are selling the TS80P which can run from 9V or 12V, for more power!
See our Distributors page for a complete list of distributors.