Convex Plastic Lens with Edge - 40mm Diameter
-
Description
Description-
The eyes have it! Add this little lens to make a big expression with our Spooky Eyes demo for microcontrollers or Raspberry Pi. These are plastic lenses, with brilliant clarity and a nice convexity (is that a word?) They've even got a lip-edge so you can mount them easily with a 38mm cutout.
We've attached these to our Raspberry Pi Animated Eyes Bonnet Kit for a real nice upgrade!
This product is just a single PLASTIC lens. Perfect for use with our Raspberry Pi Snake Eyes Bonnet guide or our Electronic Animated Eyes guide. Check out both of those for the full listing of what you'll need. Of course, these work great for other purposes when you need a convex lens.
Interested in an even fancier upgrade? Check out the GLASS lens - it's heavier but less scratch-prone.
-
Technical Details
Technical Details+
-
Learn
Learn+
MAY WE ALSO SUGGEST...
MAY WE ALSO SUGGEST...-
-
Distributors+
See our Distributors page for a complete list of distributors.
Ordering full reels vs. cut reels
Adafruit NeoPixel Digital RGB LED strips come to us in 4 or 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires as shown in the pic below. If you order a full 4 or 5 meters, you get the full reel with both connectors installed (like the pic below).
If you buy less than a full reel, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!
