Circuit Playground Bolt-On Kit
-
Description
Description-
You have a Circuit Playground Express, but you need to mount it to your charming cardboard robot friend, eh? Not so easy if you don't have a set of standoffs!
In this kit comes:- 6 x M3 12mm brass hexagonal standoffs
- 12 x M3 7mm machine screws
If you bought a Crickit for Circuit Playground, this kit is already included - we're offering it in case you've designed your own PCB you want to bolt onto!
p.s. Works great with classic Circuit Playgrounds, micro:bit's, Gemma M0 and Flora too!
-
Learn
Learn+
MAY WE ALSO SUGGEST...
MAY WE ALSO SUGGEST...-
-
Distributors+
See our Distributors page for a complete list of distributors.
Ordering full reels vs. cut reels
Adafruit NeoPixel Digital RGB LED strips come to us in 4 or 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires as shown in the pic below. If you order a full 4 or 5 meters, you get the full reel with both connectors installed (like the pic below).
If you buy less than a full reel, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!
