Motor Mount for TT Gearbox DC Motors - L-Bracket Type
-
Description
Description-
You have a TT motor, but you need to attach it to your CNC project, eh? Not so easy if you don't have an L-Bracket DC Motor Mount just like this fine one here! Made of 2mm aluminum metal, it's got a solid construction and is easy to get going. There are 4 mounting screws so you know it'll be super-solid!
Comes with one mount and a bag of hardware for attachment:- 2 x 25mm long M3 Pan heads (These go through the motor body)
- 4 x 10mm long M3 Pan heads (These attach to the thing you want to mount onto)
- 6 x M3 hex nuts
-
Technical Details
Technical Details+
MAY WE ALSO SUGGEST...
MAY WE ALSO SUGGEST...-
-
Distributors+
See our Distributors page for a complete list of distributors.
Ordering full reels vs. cut reels
Adafruit NeoPixel Digital RGB LED strips come to us in 4 or 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires as shown in the pic below. If you order a full 4 or 5 meters, you get the full reel with both connectors installed (like the pic below).
If you buy less than a full reel, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!
