Lens Adjustment Tool for Raspberry Pi Camera
-
Description
Description-
This nifty little plastic tool provides you a super simple, super cheap means for adjusting the lens of your Raspberry Pi camera!
Simply place the little hole opening snugly over the camera lens – it should set nicely with no need to force. Then turn like a dial to the left or right and adjust the focus to your heart's content!
For use with the Raspberry Pi 8MP (version 2) cameras only
-
Technical Details
Technical Details+
MAY WE ALSO SUGGEST...
MAY WE ALSO SUGGEST...-
-
Distributors+
See our Distributors page for a complete list of distributors.
Ordering full reels vs. cut reels
Adafruit NeoPixel Digital RGB LED strips come to us in 4 or 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires as shown in the pic below. If you order a full 4 or 5 meters, you get the full reel with both connectors installed (like the pic below).
If you buy less than a full reel, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!
