• Description

  Description-

  Check out this handy MicroUSB extension cable, which will make it easy for you to enclose a device that has a B type (micro USB host) port. Great if you need to extend the USB port for your Raspberry Pi, Arduino, Feather or really anything development board.
  
  This Micro-B male/female extension cable features a male USB Micro-B plug on one end, and a bulkhead mountable Micro-B female receptacle on the other. The jack half has two mounting 'ears' with 4-40 screws installed, 18mm apart. The ears are flexible so the holes don't have to be drilled very precisely. The screws can be put on from the back for 'reverse' mounting if the box thickness is a problem. The entire unit is about 12" long from tip to tip (with approx 10" cabling between connectors).

  Rated for high-speed USB 2.0 use.

  Features:

  • Embedded 4-40 screws (no threading required)
  • Mounting screws included
  • Wired straight through
  • USB 2.0 compatible

  

   

   

• Technical Details

  Technical Details+

   

   

  Product Dimensions: 315.0mm x 25.3mm x 9.9mm / 12.4" x 1.0" x 0.4"

  Product Weight: 16.2g / 0.6oz

  

  • Diagram
  • Datasheet

• Learn

  Learn+

  Mystery Box: Crypto Countdown Case

  This Cold War-era mystery box's disarm code must be toggled in before the timer reaches zero!

  

  Coffee Detonator: The TNT Plunger Grinder

  Use a high-voltage AC power source to trigger a Feather microcontroller-driven coffee grinder.

  

  Motion-Activated Solder Fume Extractor With Lamp

  Removes those pesky fumes whenever you reach for the iron

MAY WE ALSO SUGGEST...

Panel Mount USB Cable - A Male to A Female

Panel Mount USB Cable - B Female to Mini-B Male

Panel Mount USB Cable - B Female to Micro-B Male

Panel Mount USB Cable - B Male to B Female

Panel Mount Extension USB Cable - Mini B Male to Mini B Female

Right Angle Extension USB Cable - A Male to A Female

USB Micro B Cable with Data/Charge Sync Switch

Micro USB to Micro USB OTG Cable - 10" / 25mm