Small Alligator Clip to Male Jumper Wire Bundle - 12 Pieces
-
Description
Description-
For bread-boarding with unusual non-header-friendly surfaces, these cables will be your best friends! No longer will you have long strands of alligator clips that are grabbing little wires. These compact jumper cables have a premium male header on one end, and a grippy mini alligator clip on the other.
Grab onto your Flora, Circuit Playground, micro:bit, Gemma, or even a banana, and plug it into a breadboard for prototyping joy! You get 12 pieces in 6 colors.
- 12 piece set, color coded vinyl covered 1.25" alligator clips on one end, and male jumper wires on the other end
- Contains two of each: black, red, white, green, blue, and yellow
- 24 AWG wire
-
Technical Details
Technical Details+
-
Learn
Learn+
Make your Circuit Playground mobile and change direction via sound
Explore reading analog signals with the Circuit Playground.
Learn how to use the MPR121 capacitive touch sensing breakout with CircuitPython!Measure the speed of a fidget spinner with Circuit Playground's light sensor!
Build a simple & silly radio communication system with the Micro:Bit!
Create a full scale tone piano using CircuitPython, capacitive touch and some cute little fruits.
The first step in getting familiar with this fun little board.Use CircuitPython and the Gemma M0 to control iPad pinball built into an extruded aluminum mini table!
Build a working safe that uses the Circuit Playground Express as the dial to unlock a servo controlled safe!
Make a classic 16-step sequencer to create dope beats using fruity inputs.
Blink those LEDs with the BBC micro:bit
Find out how to use NeoPixels with a micro:bit
The next step in learning CircuitPython.Fun beginner's project for Circuit Playground ExpressMake a waving Makey for your Maker Faire booth!
MAY WE ALSO SUGGEST...
MAY WE ALSO SUGGEST...-
-
Distributors+
See our Distributors page for a complete list of distributors.
Ordering full reels vs. cut reels
Adafruit NeoPixel Digital RGB LED strips come to us in 4 or 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires as shown in the pic below. If you order a full 4 or 5 meters, you get the full reel with both connectors installed (like the pic below).
If you buy less than a full reel, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!
