Diffused Red 5mm LED (25 pack)
-
Description
Description-
Need some indicators? We are big fans of these diffused red LEDs, in fact we use them exclusively in our kits. They are fairly bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to your project.
- Pack of 25 diffused red LEDs
- 5mm diameter
- 660 nm wavelength
- 1.85-2.5V Forward Voltage, at 20mA current
- 250 mcd typical brightness
- Datasheet
-
Technical Details
Technical Details+
-
Learn
Learn+
Program the 'Hello World' of hardware with MicroPython.
Tools for working with digital circuits.
Great Scott!
Learn Arduino, Lesson 4. Eight LEDs and a Shift Register
Learn Arduino, Lesson 2. LEDs
Learn Arduino, Lesson 5. The Serial Monitor
Learn Arduino, Lesson 6. Digital Inputs
Learn Arduino, Lesson 8. Analog Inputs
Learn Arduino, Lesson 9. Sensing Light
A detailed introduction on how to use LEDs
Papertronics!
Explore altered states of consciousness
Scary Pumpkin!
Intro to electronics for cosplayers, no prior experience required
MAY WE ALSO SUGGEST...
MAY WE ALSO SUGGEST...-
-
Distributors+
See our Distributors page for a complete list of distributors.
Ordering full reels vs. cut reels
Adafruit NeoPixel Digital RGB LED strips come to us in 4 or 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires as shown in the pic below. If you order a full 4 or 5 meters, you get the full reel with both connectors installed (like the pic below).
If you buy less than a full reel, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!
