Super Bright Red 5mm LED (25 pack)
PRODUCT ID: 297
$8.00
-
Description
Description-
Need some really bright LEDs? We are big fans of these clear red LEDs, in fact we use them exclusively in our kits. They are very bright and have about 20degree LED beam. They go easily into a breadboard and will add that extra zing to your project.- Pack of 25 clear red LEDs
- 5mm diameter
- 640 nm wavelength
- 1.8-2.2V Forward Voltage, at 20mA current
- 1500 mcd typical brightness
- Viewing Angle : ±10 degrees
- Maximum continuous current: 30mA
-
Technical Details
Technical Details+
-
Learn
Learn+
A detailed introduction on how to use LEDs
RAAAAAWR!
How to use MATLAB and Simulink to communicate with your Arduino
Spook up your Halloween item with Blinky EyesLight up your valentine'ss geeky heart
Intro to electronics for cosplayers, no prior experience required
Harness the power of our nearest star.
Excuse me while I interrupt myself...Learn how to control digital inputs and outputs with CircuitPython!Learn how to control analog, or continuous voltage, values with CircuitPython!
Dial in the perfect color for your NeoPixel projects
MAY WE ALSO SUGGEST...
MAY WE ALSO SUGGEST...-
-
Distributors+
See our Distributors page for a complete list of distributors.
Ordering full reels vs. cut reels
Adafruit NeoPixel Digital RGB LED strips come to us in 4 or 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires as shown in the pic below. If you order a full 4 or 5 meters, you get the full reel with both connectors installed (like the pic below).
If you buy less than a full reel, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!
