Stacking Headers for Feather - 12-pin and 16-pin female headers
-
Description
Description-
These two Female Stacking Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business!
What do they do? They stack. Put the headers through your Feather and then you can not only plug them into a solderless breadboard, but you could attach circuitry on top as well
Note: Comes with one 12-pin and one 16-pin header, Feathers not included
-
Technical Details
Technical Details+
-
Learn
Learn+
A 8 x servo party for your Feather!
Thin and light, just like a...
Make your feather motorizedThin and light, just like a...
Take a fast and nimble Cortex M0+ processor and give it radio skillzBluetooth Low Energy on a board that's thin and light, just like a...
Get sensor data from a local MQTT broker into Adafruit.IO
WiFi with built-in battery charging for IoT on-the-go!
Packet FSK or LoRa radio add-on for your favvy Feather
Thin and light, just like a...
Design your own custom circuitry for Feather boards
Real time clock + SD card for data reading & writing
ARM Cortex M0+ with fast & fun wireless built in
Find the ideal conditions for a good nights rest
Get your WiFi projects up and running quickly with the fast and flexible WICED Feather!This Cold War-era mystery box's disarm code must be toggled in before the timer reaches zero!
A clockwork FeatherWing
Control room lighting & sound with the beat of your heart.Feather Power!
WiFi, Bluetooth, peripherals galore!
Send your message far and wideBreathe spooky life into an old radio by adding a Feather microcontroller to read the dial and play mysterious sounds and music!
Send your message really really far and wide
This Feather is fast like a swift, smart like an owl, strong like a ox-bird
Crisp and clear display for any of your Feathers
Blast those pixels!
NTP-enabled clock in your favorite color
Where are your Feathers at? Now you know!
Send your message really really far and wide
MAY WE ALSO SUGGEST...
MAY WE ALSO SUGGEST...-
-
Distributors+
See our Distributors page for a complete list of distributors.
Ordering full reels vs. cut reels
Adafruit NeoPixel Digital RGB LED strips come to us in 4 or 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires as shown in the pic below. If you order a full 4 or 5 meters, you get the full reel with both connectors installed (like the pic below).
If you buy less than a full reel, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!
