Premium Female/Female Jumper Wires - 40 x 6"
| QTY | DISCOUNT |
| 1-9 | $3.95 |
| 10-99 | $3.56 |
| 100+ | $3.16 |
-
Description
Description-
Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are a little over 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of ten colors). They have 0.1" sockets on either end and fit cleanly next to each other on standard-pitch 0.1" (2.54mm) header. We recentlty updated these so they are in a 'ribbon strip' instead of individual wires. You can always pull the ribbon wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses.
We suggest picking up some extra-long break-away header pins as well, you can stick those into the sockets to turn the cables into female-male or male-female jumpers!Note: The length of the jumper wires is sometimes a bit longer than what is listed.
For best results, when plugging these in a line, have the sides with the 'silver latch bit' sticking out since that side is a tiny bit wider than 0.1"
-
Technical Details
Technical Details+
-
Learn
Learn+
These go to eleven!
Use Trinket as a platform to make animals come alive - you chose the animal
Because nothing screams "portable" like a 6 lb keyboard.
How to connect a 16x32 RGB LED display to your Raspberry Pi
Daisy-chain three 16x32 LED Displays with a Raspberry Pi
Upgrade your ride with lots, and lots of NeoPixels!
How to choose your next projects connections
Mobile wireless Raspberry Pi
Portable, on-the-go lighting!
Fun with a camera, temperature sensor, PiTFT, PyGame, and adafruit.io REST, MQTT and API calls.
MAY WE ALSO SUGGEST...
MAY WE ALSO SUGGEST...-
-
Distributors+
See our Distributors page for a complete list of distributors.
