Full sized breadboard
-
Description
Description-
This is a 'full-size' breadboard, 830 tie points. Good for small and medium projects. It's 2.2" x 7" (5.5 cm x 17 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails off easily to make the breadboard as thin as 1.4" (3.5cm). You can also "snap" these breadboards together either way to make longer and/or wider breadboards. The back is made of foam double-sided tape, if you remove the protective paper you can attach it to a flat clean surface.
-
Technical Details
Technical Details+
-
Learn
Learn+
Measure high side voltage and DC current draw over I2C
Assemble your Adafruit Pi Cobbler Kit
A basic project to control LEDs with a Pi.
Triggering mp3's based on tactile input with a Pi
Convert analog inputs to digital and control audio volume
Save and Graph Analog Temperature Data
A guide to the ADS1115 and ADS1015 analog converters
A very low dropout adjustable power supply
Solderless Breadboard Arduino Clone
Add sound reactive color to your tunes.
Yes, Trinket can interface with several larger parts
Use an Arduino and Android device to help you mix drinks!
Press a button, make a sound OVER THERE.
Easily sense touch from up to 12 inputs using the MPR121!
Learn about the electronic one-way valve!Make a vampire happy with this cameo-meets-OLED-screen.
How to read analog signals from Python with an analog to digital converter and Raspberry Pi.
Got big motors to drive? Call in the choppers!Diagrams, tips and tricks to take you from beginner to brilliant
Part 2: Lights, music, and sound effects prop circuit integration
A Temperature Monitor and Alarm with parts from Adabox 001
What time is it? Metro Mini time! Build this stylish, minimalist clock.
The next step in learning CircuitPython.
Binary numbers, Boolean logic, and logic gates.
MAY WE ALSO SUGGEST...
MAY WE ALSO SUGGEST...-
-
Distributors+
See our Distributors page for a complete list of distributors.
Ordering full reels vs. cut reels
Adafruit NeoPixel Digital RGB LED strips come to us in 4 or 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires as shown in the pic below. If you order a full 4 or 5 meters, you get the full reel with both connectors installed (like the pic below).
If you buy less than a full reel, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!
