JTAG (2x10 2.54mm) to SWD (2x5 1.27mm) Cable Adapter Board
PRODUCT ID: 2094
$4.95
| QTY | DISCOUNT |
| 1-9 | $4.95 |
| 10-99 | $4.46 |
| 100+ | $4.21 |
-
Description
Description-
This adapter board is designed for adapting a 'classic' 2x10 (0.1"/2.54mm pitch) JTAG cable to a slimmer 2x5 (0.05"/1.27mm pitch) SWD Cable. It's helpful for using products like the JTAGulator or SEGGER J-Link with tiny boards that use the 10-pin SWD programming connector.
This board comes with no cables. It's really just the adapter - but is super helpful when you want to use JTAG debugging on boards that can't support 2x10 cables. We do stock the SWD cable if you need one here!
-
Technical Details
Technical Details+
- Dimensions w/components: 34mm x 24mm x 12mm / 1.3" x 0.9" x 0.5"
- Weight: 5.7g
- EagleCAD PCB Files on GitHub
- Fritzing object available in Adafruit Fritzing library
-
Learn
Learn+
Your new BLE BFF!Control a Bluetooth Low Energy device with your own code!
Step in, step out, step over and repeat!
Native GPIO bit twiddling your way to success
Using GDB to better understand program state and history.![Debug Header for the Feather [M0]](//cdn-learn.adafruit.com/guides/images/000/001/563/medium640/m0-debug-1.JPG)
Make a Simple JTAG Debugging FeatherWing for the M0
CircuitPython, Arduino IDE or even MakeCode with this Metro M0
Take your Bluetooth LE projects to the next level with the mynewt RTOS
computers are overrated anyhow
An I2C to ... whatever! interface
![Debug Header for the Feather [M0]](http://cdn-learn.adafruit.com/guides/images/000/001/563/medium640/m0-debug-1.JPG)
MAY WE ALSO SUGGEST...
MAY WE ALSO SUGGEST...-
-
Distributors+
See our Distributors page for a complete list of distributors.
