Slim Sticker-type GSM/Cellular Quad-Band Antenna - 3dBi uFL
-
Description
Description-
That's one slim cellular antenna! At just 75mm long from tip to tip and and with a thickness of just 2mm, this 3dBi GSM antenna is slim, compact and sensitive, with a 3dBi gain. The antenna juts out from its base with stick-on back so you attach it to an enclosure if you're making something like, say, a DIY phone. It has a tiny uFL connector on the end - which is perfect for the FONA - but will also work well for any other RF project on the 850/900/1800/1900/2100 bands, such as any other Cellular or GSM/GPRS device.
We also offer a version of this antenna with a longer 300mm cable.
-
Technical Details
Technical Details+
-
Learn
Learn+
Call phones, send and receive SMSs, & more! All with FONA
Use FONA as an internet connection failover device for highly available services
Ring, Ring! Who's that callin'? It's your Arduino!
A full-featured GSM/GPRS module with GPS as well!Create your own SMS-controlled door lock
Cellular + GPS tracking, all in one, for your Arduino? Oh yes!
The next generation of FONA is here!
Track your trick or treat candy route to log which houses had the best candy!
Build a geofencing project that will send alerts when it goes out of the perimeter!SMS TXT scroller on a NeoPixel Matrix with Fona + Flora
Take your Feather anywhere in the world
Build a real communicator with FONA feather!
MAY WE ALSO SUGGEST...
MAY WE ALSO SUGGEST...-
-
Distributors+
See our Distributors page for a complete list of distributors.
Ordering full reels vs. cut reels
Adafruit NeoPixel Digital RGB LED strips come to us in 4 or 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires as shown in the pic below. If you order a full 4 or 5 meters, you get the full reel with both connectors installed (like the pic below).
If you buy less than a full reel, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!
