Adafruit TSL2591 High Dynamic Range Digital Light Sensor - STEMMA QT
Qty | Discount |
---|---|
1-9 | $6.95 |
10-99 | $6.26 |
100+ | $5.56 |
Description
When the future is dazzlingly-bright, this ultra-high-range luminosity sensor will help you measure it. The TSL2591 luminosity sensor is an advanced digital light sensor, ideal for use in a wide range of light situations. Compared to low cost CdS cells, this sensor is more precise, allowing for exact lux calculations and can be configured for different gain/timing ranges to detect light ranges from 188 uLux up to 88,000 Lux on the fly.
The best part of this sensor is that it contains both infrared and full spectrum diodes! That means you can separately measure infrared, full-spectrum or human-visible light. Most sensors can only detect one or the other, which does not accurately represent what human eyes see (since we cannot perceive the IR light that is detected by most photo diodes) This sensor is much like the TSL2561 but with a wider range (and the interface code is different). This sensor has a massive 600,000,000:1 dynamic range! Unlike the TSL2561 you cannot change the I2C address, so keep that in mind.
The built-in ADC means you can use this with any microcontroller, even if it doesn't have analog inputs. The current draw is extremely low, so it's great for low power data-logging systems. about 0.4mA when actively sensing, and less than 5 uA when in power-down mode.
As if that weren't enough, we've also added SparkFun qwiic compatible STEMMA QT connectors for the I2C bus so you don't even need to solder. Just wire up to your favorite micro with a plug-and-play cable to get data ASAP. For a no-solder experience, just wire up to your favorite micro using a STEMMA QT adapter cable. The Stemma QT connectors also mean the TSL2591 can be used with our various associated accessories. QT Cable is not included, but we have a variety in the shop
Of course, we wouldn't leave you with a datasheet and a "good luck!" - we wrote a detailed tutorial showing how to wire up the sensor, use it with an Arduino and example code that gets readings and calculates lux.
Technical Details
Chip specifications
- Approximates Human eye Response
- Extremely wide dynamic range 1 to 600,000,000 Counts
- Lux Range: 188 uLux sensitivity, up to 88,000 Lux input measurements.
- Temperature range: -30 to 80 *C
- Voltage range: 3.3-5V into onboard regulator
- Interface: I2C
- This board/chip uses I2C 7-bit address 0x29 and 0x28 (yes BOTH!)
- Dimensions: 19mm x 16mm x 1mm / .75" x .63" x .04"
- Weight: 1.1g
- Datasheets, Fritzing object and PCB CAD files available in tutorial
Revision History:
- As of October 24, 2023 - We've added a jumper to the LED and updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen
- As of Sept 16, 2020 - We've updated this sensor to our 0.7" x 1.0" STEMMA QT standard for sensors. There are now four mounting holes and two STEMMA QT connectors for plug-and-play connectivity! The pinout has changed slightly to be standardized.
- As of Nov 25, 2020 - We've updated this sensor to include a cuttable jumper to disable the onboard green LED
Learn
-
www.direnc.net
Turkey -
Kiwi Electronics
Netherlands -
Málna PC Magyarország
Hungary -
Little Bird Electronics
Australia -
Elektronica Voor Jou
Netherlands -
Makerlab Electronics
Philippines -
ABRA Electronics
Canada -
Pimoroni
United Kingdom -
Deryuantech
Taiwan -
Eckstein Komponente
Germany -
MAKERSHOP.DE
Germany -
ThaiEasyElec
Thailand -
The Pi Hut
United Kingdom -
Makersify
United Kingdom -
SpikenzieLabs
Canada -
Electrokit Sweden AB
Sweden -
Mouser Electronics
United States -
ROBU.IN
India -
BOTLAND B. DERKACZ SP.K.
Czech Republic -
BOTLAND B. DERKACZ SP.K.
Germany -
BOTLAND B. DERKACZ SP.K.
Poland -
NTREX, Inc.- Devicemart
South Korea -
3DMakerWorld, Inc.
United States -
Paradisetronic.com
Germany -
BerryBase
Germany -
Gotron BVBA
Belgium -
Switch Science
Japan -
Digi-Key Electronics
United States -
Go Tronic
France -
CR Cibernetica
Costa Rica -
Core Electronics
Australia
See our Distributors page for a complete list of distributors.