UNTZtrument Add-on Acrylic Tweaker/Hacker Panel
-
Description
Description-
Add knobs to your grid with this add-on accessory for the UNTZtrument. This is a replacement piece of laser cut acrylic to use when building an Adafruit UNTZtrument. It's perfect for adding a rotary encoder or any of our panel mount potentiometers.
Swap this in during your build or upgrade your UNTZtrument after the fact. This piece can be used for any/all of the sides except for the one with the USB cutout. So you can use up to 3 for left/front/right knobbin' action.
-
Technical Details
Technical Details+
-
Learn
Learn+
MAY WE ALSO SUGGEST...
MAY WE ALSO SUGGEST...-
-
Distributors+
See our Distributors page for a complete list of distributors.
Ordering full reels vs. cut reels
Adafruit NeoPixel Digital RGB LED strips come to us in 4 or 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires as shown in the pic below. If you order a full 4 or 5 meters, you get the full reel with both connectors installed (like the pic below).
If you buy less than a full reel, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!
