Thin Plastic Speaker w/Wires - 8 ohm 0.25W
-
Description
Description-
Listen up! This 1.5" diameter speaker cone is the perfect addition to any audio project where you need an 8Ω impedance and are using 0.25W of power. The speakers are rated at 0.25W, with a maximum input of 0.5W (printed wattage on back of speaker may have either value).
We particularly like this cone as it's very simple and its plastic body is extremely lightweight and thin. Originally designed for 'talking' greeting cards, its fairly loud yet lightweight.
Works great with our Wave shield or class D amplifier board. Just be careful not to overdrive the speaker as high volumes can blow it out! Start with lower volume and increase carefully.
-
Technical Details
Technical Details+
Dimensions:
- Diameter: 39mm / 1.5"
- Weight: 4.6g
Specifications:
- Datasheet
- Resonant Frequency: 440 ±20% HZ
- Impedance: 8 ohm ±15% at 1500HZ
- Rated Input Power: 0.25 W
- Maximum Input Power: 0.5W - printed wattage on back of speaker may have either value
- Frequency Range: 440~20KHz
-
Learn
Learn+
Call phones, send and receive SMSs, & more! All with FONA
The smallest, and cutest Mac Classic inspired project
Ring, Ring! Who's that callin'? It's your Arduino!
Make a portable Raspberry Pi
“Greetings, adventurer!”
Slim and portable!
Explore the apocalypse with a trusty Pi
Build a real communicator with FONA feather!
Add digital-quality audio with a class D amplifier for easy sound!
I can make it!Lights, music, and sound effects prop circuit designPart 2: Lights, music, and sound effects prop circuit integration
Part 3: Permanent circuit, 3D printing, and final assembly
Build a cardboard animatronic hand with independent finger control using CRICKIT robotics controller board!3D Print a Bladesaw
MAY WE ALSO SUGGEST...
MAY WE ALSO SUGGEST...-
-
Distributors+
See our Distributors page for a complete list of distributors.
Ordering full reels vs. cut reels
Adafruit NeoPixel Digital RGB LED strips come to us in 4 or 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires as shown in the pic below. If you order a full 4 or 5 meters, you get the full reel with both connectors installed (like the pic below).
If you buy less than a full reel, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!
