20mm Coin Cell Breakout w/On-Off Switch (CR2032)
QTY | DISCOUNT |
1-9 | $3.50 |
10-99 | $3.15 |
100+ | $2.80 |
Description
Simple but effective - this sewable breakout board has a CR2032 coin cell battery holder soldered on, an on/off switch and 0.1" pitch breakout pins for easy connecting. Great for powering very low-current projects, or adding a battery backup circuit to a real-time-clock or similar. There's two ground pins, one 'switched' power pin, and one pin that is always on.
Comes with one fully assembled and tested breakout plus a small stick of 0.1" header so you can solder it on and plug into a breadboard. Coin cell battery is not included.
We also have a version without a switch
Technical Details
Dimensions:
- 29mm x 28mm x 1.6mm / 1.1" x 1.1" x 0.06"
- Mounting hole distance: 22mm x 22mm / 0.9" x 0.9"
- Weight: 3.5g
Learn
-
NTREX, Inc.- Devicemart
-
Evil Mad Science LLC
-
Pimoroni
-
SHA 256 Systems
-
Elmwood Electronics
-
Switch Science
-
Distrelec
-
GRobotronics
-
Core Electronics
-
Kiwi Electronics
-
EXP-Tech
-
Robofun
-
BerryBase
-
Makersify
-
The Pi Hut
-
MicroCenter
-
Mouser Electronics
-
S.O.S Solutions
-
Digi-Key Electronics
-
ECOROBOTICS
See our Distributors page for a complete list of distributors.