Adafruit LED Sequins - Royal Blue - Pack of 5
Qty | Discount |
---|---|
1-9 | $3.95 |
10-99 | $3.56 |
100+ | $3.16 |
Description
Sew a little sparkle into your wearable project with an Adafruit LED Sequin. These are the kid-sister to our popular Flora NeoPixel, they only show a single color and they don't have digital control, but that makes them smaller easier to use for many projects.
Simply connect 3 to 6VDC to the + pin and ground to the - pin, and the LED on the board will light up. You can make the LEDs fade and twinkle by using the PWM (a.k.a. analogWrite) functionality of your Gemma or Flora, or just connect directly to a digital I/O pin of a microcontroller to turn on and off. Or even skip the micro altogether, and power directly from a LiPoly or coin battery.
This order comes with 5 Royal Blue "1206 size" LEDs, matched with a 100 ohm resistor. When powered from 3.3V they draw about 5mA so you can put up to 4 or 5 in parallel on a single microcontroller pin. We also have these sequins in warm white, emerald green, ruby red, and rose pink.
Technical Details
- 4mm x 9mm / .16" x .35"
- 2mm thick
- Holes are 7mm / .28" apart
Datasheets, EagleCAD files and Fritzing objects available in the tutorial
Learn
-
Mouser Electronics
United States -
Little Bird Electronics
Australia -
Letmeknow
France -
Makersify
United Kingdom -
The Pi Hut
United Kingdom -
BOTLAND B. DERKACZ SP.K.
Poland -
BOTLAND B. DERKACZ SP.K.
Czech Republic -
BOTLAND B. DERKACZ SP.K.
Germany -
MicroCenter
United States -
DigiKey Electronics
United States -
Core Electronics
Australia
See our Distributors page for a complete list of distributors.