Adjustable Bent-Wire Stand - up to 7" Tablets and Small Screens
-
Description
Description-
This handy bent-wire display stand was originally designed to hold up 7" tablets but the rubberized design is great for general purpose electronics & TFT holding. We use it to hold up our HDMI displays while connected to a Pi - even though it is meant for 7" we found that its fine for 5" to 10" TFTs since they're not as heavy as a tablet. You can adjust the angle and collapse it for travel.
iPad mini, screen and Mho's Resistance not included :)
Adjustable Bent-Wire Stand - up to 7" Tablets and Small Screens (17:43)
-
Technical Details
Technical Details+
-
Learn
Learn+
MAY WE ALSO SUGGEST...
MAY WE ALSO SUGGEST...-
-
Distributors+
See our Distributors page for a complete list of distributors.
Ordering full reels vs. cut reels
Adafruit NeoPixel Digital RGB LED strips come to us in 4 or 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires as shown in the pic below. If you order a full 4 or 5 meters, you get the full reel with both connectors installed (like the pic below).
If you buy less than a full reel, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!
