10-pin 2x5 Socket-Socket 1.27mm IDC (SWD) Cable - 150mm long

PRODUCT ID: 1675

$2.95

10-pin 2x5 Socket-Socket 1.27mm IDC (SWD) Cable - 150mm long

QTY	DISCOUNT
1-9	$2.95
10-99	$2.66
100+	$2.36

OUT OF STOCK

QTY	DISCOUNT
1-9	$2.95
10-99	$2.66
100+	$2.36

OUT OF STOCK

Description

Description-

These little cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05") pitch SWD programming connectors. We see these connectors often on ARM Cortex dev kits, and have a few handy in our ARM-dev box. We thought you may want a backup cable as well, so now they are in the Adafruit shop!

One cable per order. The ribbon cable is 0.06mm/0.025" pitch and the connector is a 1.27mm (0.05") pitch 2x5 box. These are not for use with programming most AVRs or other large devices that have 0.1" pitch connectors so be aware which you need!

10-pin 2x5 Socket-Socket 1.27mm IDC (SWD) Cable - 150mm long (10:37)
Technical Details

Technical Details+
- Dimensions: 150mm long x 6mm wide / 5.9" x .3"
- Connector: 5mm x 3mm
- Weight: 1.9g
Learn

Learn+

Introducing the Adafruit Bluefruit LE Friend

Your new BLE BFF!

Reverse Engineering a Bluetooth Low Energy Light Bulb

Control a Bluetooth Low Energy device with your own code!

Proper Debugging of ATSAMD21 Processors

Step in, step out, step over and repeat!

Programming Microcontrollers using OpenOCD on a Raspberry Pi

Native GPIO bit twiddling your way to success

Debugging the SAMD21 with GDB

Using GDB to better understand program state and history.

Debug Header for the Feather [M0]

Make a Simple JTAG Debugging FeatherWing for the M0

Bluefruit nRF52 Feather Learning Guide

Get started now with our most powerful Bluefruit board yet!

Adafruit Metro M0 Express - Designed for CircuitPython

CircuitPython, Arduino IDE or even MakeCode with this Metro M0

Adafruit nRF52 Pro Feather with Mynewt

Take your Bluetooth LE projects to the next level with the mynewt RTOS

Programming an M0 using an Arduino

computers are overrated anyhow