Gemma Starter Pack
-
Description
Description-
Get started with Adafruit GEMMA with this lovely starter kit! Included is everything you need to make a basic project. There's a GEMMA board, four sewable bright RGB pixels, a battery holder and batteries, 2-ply conductive thread, alligator clips to help you test out your circuit, and a USB cable for programming GEMMA.
Note: As of June 20th, 2016 this pack no longer comes with CR2032 batteries to make shipping easier for customers. You can buy some from us or from your local battery-supplier.
- GEMMA V2 miniature wearable electronic platform
- Four Flora RGB NeoPixels V2
- Coin cell battery holder with JST connector and on/off switch
- Stainless Thin Conductive Thread - 2 ply - 25 meter/85 ft
- Needle set with 20 pieces
- Small Alligator Clip Test Lead (set of 12)
- USB cable - A/MicroB - 3ft
We guarantee lots of safe sewing fun!Gemma Starter Pack (27:17)
-
Learn
Learn+
All-sewn slide-sensor circuitBring out your inner geisha with this Neopixeled chopstick kanzashi.
feel the passage of time
Glowing majesty two ways
Light up the party!
Glowing NeoPixel Jewel Eyes
Addressable, chainable, delectable!
Introducing Adafruit's mini wearable microcontrollerNeoPixel Ring Bling
Inspired by Iron Man's Arc Reactor!
Wear a constellation with NeoPixels & GEMMAPixel ring blingLight up your drums with sound.Design and 3D Print a custom tree topperBuild a sound reactive LED microphone flag
Wear a crown of LEDs for your birthday or prom!
Wear your heart on your... lapel!
3D printed NinjaFlex Electronic Fashion
See your stuff!GEMMA + LED studs
They see me rolling, bootloading!
Surpise your friends with a mother ship on your head, Spielberg style.
Calibrate sensors on GEMMA and Trinket!Shoot powerful LED lights, from your chest!Wrap up in light and motionNew Years Glasses with NeoPixel Rings
MAY WE ALSO SUGGEST...
MAY WE ALSO SUGGEST...-
-
Distributors+
See our Distributors page for a complete list of distributors.
Ordering full reels vs. cut reels
Adafruit NeoPixel Digital RGB LED strips come to us in 4 or 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires as shown in the pic below. If you order a full 4 or 5 meters, you get the full reel with both connectors installed (like the pic below).
If you buy less than a full reel, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!
