NeoPixel 5050 RGB LED with Integrated Driver Chip - 10 Pack

Product ID: 1655
$4.50
Qty Discount
1-9 $4.50
10-99 $4.05
100+ $3.60

Description

Make your own smart LED arrangement with the same integrated LED that is used in our NeoPixel strip and pixels. This tiny 5050 (5mm x 5mm) RGB LED is fairly easy to solder and is the most compact way possible to integrate multiple bright LEDs to a design. The driver chip is inside the LED and has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and no external choke resistors are required making your design minimal. Power the whole thing with 5VDC and you're ready to rock.

This is the 4 pin LED chip version, not 6. It is code compatible and the same over-all shape and functionality but not the same pinout so you cannot use these to replace an 'S chip. If you are designing a new PCB we suggest going with the B, since it has built in polarity protection. Other than that, B and S are the same brightness, and use the exact same code interface.

The LEDs are 'chainable' by connecting the output of one chip into the input of another - see the datasheet for diagrams and pinouts. To allow the entire chip to be integrated into a 6-pin package, there is a single data line with a very timing-specific protocol. Since the protocol is very sensitive to timing, it requires a real-time microconroller such as an AVR, Arduino, PIC, mbed, etc. It cannot be used with a Linux-based microcomputer or interpreted microcontroller such as the netduino or Basic Stamp. The LEDs basically have a WS2811 inside, but fixed at the 800KHz 'high speed' setting. Our wonderfully-written Neopixel library for Arduino supports these pixels! As it requires hand-tuned assembly it is only for AVR cores but others may have ported this chip driver code so please google around. An 8MHz or faster processor is required.

These raw LEDs are cut from a reel and/or might be loose. They may not suitable for pick & place + reflow. We recommend these for careful hand soldering only! Comes in a package with 10 individual LEDs. We have a ready-to-go component for this in the Adafruit EAGLE library

Play video: Introducing NeoPixels by Adafruit!

Play video: LED Drum Set - Mod Your Drums to React to Sound #Adafruit #3DPrinting

Play video: New Products 01/18/2014

5050 RGB LED with Integrated Driver Chip - 10 Pack (17:12)

Technical Details

  • Weight: 1.12g

Revision History:

  • As of June 10, 2022 - The LED pack now comes with a moisture level card in the vacuum-sealed bag along with a desiccant bag.
RoHS 2 2011 65 EU Compliant
RoHS 2 2015 863 EU Compliant

Learn

Everything you always wanted to know about Adafruit NeoPixels but were afraid to ask
How to control NeoPixel LEDs with Python on a Raspberry Pi!
Make a glowy PCB for your QT Py