Adafruit 10-DOF IMU Breakout - L3GD20H + LSM303 + BMP180

Product ID: 1604
$29.95

Description

This inertial-measurement-unit combines 3 of the best quality sensors available on the market to give you 11 axes of data: 3 axes of accelerometer data, 3 axes gyroscopic, 3 axes magnetic (compass), barometric pressure/altitude and temperature. We tested many different 'combination' sensors and found these were the best value, with stable and reliable readings.

The L3DG20H gyroscope + LSM303DLHC accelerometer compass + BMP180 barometric/temperature sensors are all on one breakout here, to save you space and money. Since all of them use I2C, you can communicate with all of them using only two wires. Most will be pretty happy with just the plain I2C interfacing, but we also break out the 'data ready' and 'interrupt' pins, so advanced users can interface with if they choose. A 3V regulator with reverse-polarity protection means you don't have to worry about frying the boards by accident. There's level shifting circuitry so the IMU can be used with 3 or 5V logic boards. And check out those mounting holes! You can securely attach this board to your rocket, robot, art project.

Each order comes with one assembled and tested 10DOF breakout board and a small piece of header.

Since this is a combination of 3 different breakouts, we suggest visiting those pages for much more information: L3GD20H, LSM303, BMP180 but here are some quick stats:

  • L3GD20H 3-axis gyroscope: ±250, ±500, or ±2000 degree-per-second scale
  • LSM303 3-axis compass: ±1.3 to ±8.1 gauss magnetic field scale
  • LSM303 3-axis accelerometer: ±2g/±4g/±8g/±16g selectable scale
  • BMP180 barometric pressure/temperature: -40 to 85 °C, 300 - 1100hPa range, 0.17m resolution

Play video: New Products 11/30/2013

Adafruit 10-DOF IMU Breakout - L3GD20 + LSM303 + BMP180 (5:22)

Technical Details

Dimensions (without header):

  • Length: 1.5" / 38mm
  • Width: 0.9" / 23mm
  • Height: 0.125" / 3mm
  • Weight: 2.8g
  • This board/chip uses I2C 7-bit addresses 0x19 & 0x1E & 0x6B & 0x77

Revision History:

  • Oct 15, 2014 we switch the L3GD20 to the L3GD20H which is a higher quality gyro. It is code compatible with our library, the ID register value has been changed but is otherwise the same

Datasheets, Fritzing object and EagleCAD PCB files available in the tutorial

Learn

Barometric Pressure, Temperature, & Altitude Sensor
User's guide for Adafruit's 10-DOF breakout board
User's guide for Adafruit's 9-DOF breakout board
How to turn Adafruit's 9-DOF, 10-DOF, or LSM9DS0 breakouts into a low cost AHRS (attitude and heading reference system)
See All Guides