Short Wire Alligator Clip Test Lead (set of 12)
-
Description
Description-
Connect this to that without soldering using these handy mini alligator clip test leads. Approximately 4.5" overall cables with alligator clip on each end, color coded. You get 12 pieces in 6 colors. Strong and grippy, these always come in handy! We often use these in conjunction with a multimeter so we don't have to hold the probes in place.
Compared to our Large alligator clip set, these clips are smaller and 'pointier'. These are also super short, which makes for less tangle- 12 piece set, color coded vinyl covered alligator clips.
- Contains two of each: Black, red, white, green, blue, and yellow.
- Heavy 22AWG copper wire
- 1 1/4" alligator clips at both ends
Short Wire Alligator Clip Test Lead (set of 12) (0:15)
-
Technical Details
Technical Details+
-
Learn
Learn+
Turn a Gemma M0 into a combination Morse code keyer and transmitter!
Addressable, chainable, delectable!
Stitch some sparkle into your next wearableSound sensitive NeoPixel cap
All the feels!
Calibrate sensors on GEMMA and Trinket!
What to pack
A sewable BLE add-on for your Flora!
Your playground for exploring the world of electronics
Interact with Circuit Playground from your phone or tablet without wires!
Create beautiful, expressive light paintings using the Circuit Playground for long exposure photography.
Make a fancy, color changing Pixie Dust Bag with Circuit Playground Express!Use CircuitPython and the Gemma M0 to control iPad pinball built into an extruded aluminum mini table!
MAY WE ALSO SUGGEST...
MAY WE ALSO SUGGEST...-
-
Distributors+
See our Distributors page for a complete list of distributors.
Ordering full reels vs. cut reels
Adafruit NeoPixel Digital RGB LED strips come to us in 4 or 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires as shown in the pic below. If you order a full 4 or 5 meters, you get the full reel with both connectors installed (like the pic below).
If you buy less than a full reel, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!
