Speaker - 3" Diameter - 4 Ohm 3 Watt
-
Description
Description-
Listen up! This 3" diameter speaker cone is the perfect addition to any audio project where you need an 4 ohm impedance and 3W or less of power. We particularly like this cone as it has 4 handy mounting tabs 60mm apart.
Works great with our class D amplifier board.
Speaker - 3" Diameter - 4 Ohm 3 Watt (0:01)
-
Technical Details
Technical Details+
-
Learn
Learn+
RAAAAAWR!
Adafruit Trinket is the talk of the town. Now it can talk back!
Add a little audio amplifier with ease
A mini class D with AGC and I2C control? Yes please!
Play MP3/Ogg/WAV/MIDI and more on any Arduino
All about our great new audio trigger board
Add digital-quality audio with a class D amplifier for easy sound!
Turn it up!
Bumpin' tooonz for your Feather board
A tiny emulator helperBreathe spooky life into an old radio by adding a Feather microcontroller to read the dial and play mysterious sounds and music!
MAY WE ALSO SUGGEST...
MAY WE ALSO SUGGEST...-
-
Distributors+
See our Distributors page for a complete list of distributors.
Ordering full reels vs. cut reels
Adafruit NeoPixel Digital RGB LED strips come to us in 4 or 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires as shown in the pic below. If you order a full 4 or 5 meters, you get the full reel with both connectors installed (like the pic below).
If you buy less than a full reel, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!
