Button Hex Machine Screw - M4 thread - 10mm long - pack of 50
-
Description
Description-
Cute as a button, these button-head hex screws are what we suggest for putting together a project with our slotted extruded aluminum. Use a 2.5mm hex wrench to attach/detach. This length is good for attaching something about 4mm/0.15" thick to 20x20 extrusion.
Comes in a pack of 50. M4 0.7mm pitch 10mm threaded body.
Button Hex Machine Screw - M4 thread - 10mm long - pack of 50 (6:35)
-
Technical Details
Technical Details+
-
Learn
Learn+
MAY WE ALSO SUGGEST...
MAY WE ALSO SUGGEST...-
-
Distributors+
See our Distributors page for a complete list of distributors.
Ordering full reels vs. cut reels
Adafruit NeoPixel Digital RGB LED strips come to us in 4 or 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires as shown in the pic below. If you order a full 4 or 5 meters, you get the full reel with both connectors installed (like the pic below).
If you buy less than a full reel, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!
