Arcade Button Quick-Connect Wire Pairs - 0.11" (10 pack)
| QTY | DISCOUNT |
| 1-9 | $4.95 |
| 10-99 | $4.46 |
| 100+ | $3.96 |
-
Description
Description-
Quick connector wire sets will make wiring up our arcade-style or metal buttons quicky-quick. Each wire comes as a 'pair' with two 0.11" quick-connects pre-crimped onto 20cm long wires. The wires are then terminated together in a JST 2.5mm/0.1" spaced 2-pin connector (we don't have the exact part number yet for the connector but you can just use 0.1" header) Of course you can cut this off if you don't have use for it.
Works best with our round plain arcade buttons, doesn't work as well on the square or round "illuminated" buttons.
If you need a connector for the other side, try this JST XH (matching part from Digi-Key here)We also have versions with 0.187" and 0.25" terminal contacts, for our microswitches and larger arcade buttons.
Arcade/Button Quick-Connect Wire Pair - Set of 10 pairs (0:50)
-
Technical Details
Technical Details+
-
Learn
Learn+
Authentic sights, sounds and feel of 1980s arcade gaming.Make Something Beautiful. And Bright. Really Bright.
Cafe White Noise Machine
Track your trick or treat candy route to log which houses had the best candy!
A tiny emulator helperBuild a huge timer for an event or race. It's a digital segment display made from RGB NeoPixels!Make a pinball controller for your iOS device using Teensy
Raspberry Pi Retro ArcadeUse CircuitPython and the Gemma M0 to control iPad pinball built into an extruded aluminum mini table!
Build a full-scale arcade controller for your pocket-scale Arduboy!
How to add your own buttons, switches, and joysticks to the Microsoft Xbox Adaptive Controller
MAY WE ALSO SUGGEST...
MAY WE ALSO SUGGEST...-
-
Distributors+
See our Distributors page for a complete list of distributors.
