Tactile Switch Buttons (12mm square, 6mm tall) x 10 pack
-
Description
Description-
Medium-sized clicky momentary switches are standard input "buttons" on electronic projects. These work best in a PCB but can be used on a solderless breadboard as shown in this tutorial. The pins are normally open (disconnected) and when the button is pressed they are momentarily closed.
They come in a pack of 10, they're pretty handy so you'll want to keep them around.
You can find an EAGLE cad package for these in switch-omron:B3F-40XX -
Technical Details
Technical Details+
-
Learn
Learn+
Learn how to use a push switch with the BeagleBone Black
The world's most esoteric Pi accessory?
What position is your servo in?
A Temperature Monitor and Alarm with parts from Adabox 001
LED ring GPS navigation and timekeepingCreate ancient magic with modern science
Leisure learning laden with light!
Observe your friends with this Selfie Block!Make your own adorable BMO with a mini 8x8 LED Matrix and Gemma.
The next step in learning CircuitPython.
Bring your own rainbowWhen your microcontroller needs to accurately read if a switch is flipped
Interactive Halloween
Make your own custom wireless gamepad!
Retropie in your pocket!
Auto dispense solder paste with the touch of a button!
Light up your ride!Ride the express bus to the Uncanny Valley
Make a portable Raspberry Pi 2 game console
This is some serious cosplay tech. Throw it down.
Build a real communicator with FONA feather!Blink LEDs and read buttons with digital I/O and MicroPython!
MAY WE ALSO SUGGEST...
MAY WE ALSO SUGGEST...-
-
Distributors+
See our Distributors page for a complete list of distributors.
Ordering full reels vs. cut reels
Adafruit NeoPixel Digital RGB LED strips come to us in 4 or 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires as shown in the pic below. If you order a full 4 or 5 meters, you get the full reel with both connectors installed (like the pic below).
If you buy less than a full reel, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!
