Raspberry Pi Zero W Basic Pack - Includes Pi Zero W

PRODUCT ID: 3409

Note: Due to popular demand, there might be some delay in shipping products containing Pi Zero W! Remember those cereal commercials that would always...

Note: Due to popular demand, there might be some delay in shipping products containing Pi Zero W! Remember those cereal commercials that would always say, "part of a complete breakfast"? Well the Pi Zero's a lot like that bowl of cereal - while it's great on its own, you need a lot of accessories to make it a complete meal. The Pi Zero W Basic Pack is the barest of essentials that you'll need to get...

$24.50

IN STOCK

Raspberry Pi Zero W Starter Pack - Includes Pi Zero W

PRODUCT ID: 3411

Note: Due to popular demand, there might be some delay in shipping products containing Pi Zero W! Remember those cereal commercials that would always...

Note: Due to popular demand, there might be some delay in shipping products containing Pi Zero W! Remember those cereal commercials that would always say, "part of a complete breakfast"? Well the Pi Zero's a lot like that bowl of cereal - while it's great on its own, you need a lot of accessories to make it a complete meal. The Pi Zero W Starter Pack is everything you need to get going with your...

$59.95

OUT OF STOCK

Raspberry Pi Zero W Budget Pack - Includes Pi Zero W

PRODUCT ID: 3410

Note: Due to popular demand, there might be some delay in shipping products containing Pi Zero W! Remember those cereal commercials that would always...

Note: Due to popular demand, there might be some delay in shipping products containing Pi Zero W! Remember those cereal commercials that would always say, "part of a complete breakfast"? Well the Pi Zero's a lot like that bowl of cereal - while it's great on its own, you need a lot of accessories to make it a complete meal. The Pi Zero W Budget Pack is almost everything you need to get going with your...

$34.50

IN STOCK

Stereo Bonnet Pack for Raspberry Pi Zero W - Includes Pi Zero W

PRODUCT ID: 3412

Note: Due to popular demand, there might be some delay in shipping products containing Pi Zero W! Remember those cereal commercials that would always...

$34.95

IN STOCK

Raspberry Pi Zero W

PRODUCT ID: 3400

Note: Due to popular demand, there might be some delay in shipping products containing Pi Zero W! If you didn't think that the Raspberry Pi Zero...

Note: Due to popular demand, there might be some delay in shipping products containing Pi Zero W! If you didn't think that the Raspberry Pi Zero could possibly get any better, then boy do we have a pleasant surprise for you! The new Raspberry Pi Zero W offers all the benefits of the Pi Zero v1.3, but with one big difference – built-in WiFi! More specifically, this giant upgrade is the addition of a BCM43143 WiFi chip BUILT-IN to...

$10.00

OUT OF STOCK

Adafruit Pi Protector for Raspberry Pi Model Zero

PRODUCT ID: 2883

Now that we're carrying the Pi Zero, PaintYourDragon is back with another gorgeous laser-cut masterpiece. This time he's taken a pass...

Now that we're carrying the Pi Zero, PaintYourDragon is back with another gorgeous laser-cut masterpiece. This time he's taken a pass at a Pi Protector for Raspberry Pi Zero, not quite a full case, it will keep your Pi Zero safe and svelte. Keep your Raspberry Pi® Zero computer tidy and safe in this lovely clear acrylic enclosure. We designed this simple protector to be beautiful, easy to assemble and perfect for...

$4.95

IN STOCK

Break-away 0.1" 2x20-pin Strip Dual Male Header

PRODUCT ID: 2822

If we could eat headers, we'd have them for breakfast, lunch, and dinner. But we can't :( So we're making the best of it and...

If we could eat headers, we'd have them for breakfast, lunch, and dinner. But we can't :( So we're making the best of it and selling them! This 2x20-pin strip male header is a great way to add pins to 2x20 0.1" holes in a PCB. They're also perfect companion piece to our 2x20-pin right-angle female header.

$0.95

IN STOCK

0.1" 2x20-pin Strip Right Angle Female Header

PRODUCT ID: 2823

If we could eat headers we'd have them for breakfast, lunch, and dinner. But we can't :( So we're making the best of it and...

If we could eat headers we'd have them for breakfast, lunch, and dinner. But we can't :( So we're making the best of it and selling them! This 2x20-pin strip, right-angle female header is a perfect companion piece to our 2x20-pin Dual Male Header. It's a great way to add right-angle capability to a 2x20 pin circuit board either by attaching the right-angle male headers to the board and having a right-angle female...

$1.50

IN STOCK

Mini HDMI Plug to Standard HDMI Jack Adapter

PRODUCT ID: 2819

What an adorable little pug! Sorry - plug! What an adorable mini HDMI to HDMI plug. We find this plug adapter really helpful....

What an adorable little pug! Sorry - plug! What an adorable mini HDMI to HDMI plug. We find this plug adapter really helpful. It's a great way to convert any mini HDMI plug to a normal HDMI plug and...that's about it! Now you can use any of your classic HDMI cables. Simple. Useful. Adorable. Note: This product may come in black or white. They are functionally the same. We cannot control...

$2.95

IN STOCK

USB OTG Host Cable - MicroB OTG male to A female

PRODUCT ID: 1099

This cable looks like a USB micro cable but it isn't! Instead of a USB A Plug, it has a USB A Socket on the end. This cable is designed for use with...

This cable looks like a USB micro cable but it isn't! Instead of a USB A Plug, it has a USB A Socket on the end. This cable is designed for use with OTG (On the Go) host devices (like the Arduino Due or many tablets) so you can connect a mouse, keyboard, or any other USB device. You'll still need to have drivers on the device, this cable is just a cable and contains no microcontroller or electronics inside. Approximately 6" long from end to end....

$2.50

IN STOCK

8GB Class 10 SD/MicroSD Memory Card - SD Adapter Included

PRODUCT ID: 2692

Add mega-storage in a jiffy using this 8 GB micro-SD card. It comes with a SD adapter so you can use it with any of our shields or adapters!...

Add mega-storage in a jiffy using this 8 GB micro-SD card. It comes with a SD adapter so you can use it with any of our shields or adapters! Preformatted to FAT so it works out of the box with our projects. Tested and works great with our Wave shield, Data logger shield and GPS shield, and micro-SD adapter as well as any other device in the Adafruit shop that uses (micro)-SD cards! Also perfect for use with Raspberry Pi computers, just burn the...

$9.95

IN STOCK

Tiny OTG Adapter - USB Micro to USB

PRODUCT ID: 2910

This super slim, super tiny, and super cute Micro-B to USB on-the-go adapter is so slim, tiny, and cute that we'd pinch its cheeks if it was...

This super slim, super tiny, and super cute Micro-B to USB on-the-go adapter is so slim, tiny, and cute that we'd pinch its cheeks if it was big enough to have cheeks. At just ~15.5mm long, ~11.3mm wide, and ~2mm, this really is the tiniest little adapter we've probably ever seen. But don't let the size fool you - this is a perfect and easy way to turn a device or cable with a USB-A to a USB-micro, great for use with OTG...

$2.95

IN STOCK

Pibow Zero Case for Raspberry Pi Zero v1.3

PRODUCT ID: 3005

Crafted out of four transparent acrylic pieces the Pibow Zero Case for Raspberry Pi Zero protects your Pi while showing it off to the world!...

Crafted out of four transparent acrylic pieces the Pibow Zero Case for Raspberry Pi Zero protects your Pi while showing it off to the world! Each layer is laser-cut from colorful, lightweight, and high-quality cast acrylic. All of the primary ports and GPIO pins are accessible (it encloses the micro-SD slot). No tools are necessary for assembly or disassembly and the case comes in at a conveniently lightweight 34g....

$5.95

IN STOCK

Pimoroni Zero LiPo

PRODUCT ID: 3196

Having a discrete, slick, and tidy power supply is always tricky when taking a project on the go...but get ready to roam the earth worry free with...

Having a discrete, slick, and tidy power supply is always tricky when taking a project on the go...but get ready to roam the earth worry free with the tiny little Pimoroni Zero LiPo ! It aims to give you the most compact power supply possible for all versions of Raspberry Pi. You can either solder the 0.8mm thick PCB directly to the bottom of your GPIO header for a permanent solution or solder on the provided 2x4 0.1" female...

$9.95

OUT OF STOCK

Mini HDMI to VGA Video Adapter with 3.5mm Stereo Cable

PRODUCT ID: 3048

If you have a computer or tablet or device with Mini HDMI output but you want to connect it to a projector, monitor or display with VGA input, you...

If you have a computer or tablet or device with Mini HDMI output but you want to connect it to a projector, monitor or display with VGA input, you have come to the right place! This nifty adapter cable has a Mini HDMI plug connector at one end and at the other end a DB-15 VGA connector (it has hex nuts that you can remove if you are trying to mate it with a cable that also has hex nuts). There's also an audio jack on the side, this provides...

$17.50

IN STOCK

4GB SD Card w/ Jessie Lite

PRODUCT ID: 2820

This is a 4GB microSDHC card (SDC44GB) that comes with a SD adapter and is pre-programmed to contain the latest Raspbian Jessie Lite - released in...

This is a 4GB microSDHC card (SDC44GB) that comes with a SD adapter and is pre-programmed to contain the latest Raspbian Jessie Lite - released in November of 2015. The cool thing about this version is that it works with your Pi Zero (as well as all Raspberry Pi's)! Raspbian is a free operating system based on Debian optimized for the Raspberry Pi hardware. An operating system is the set of basic programs and utilities that make your...

$9.95

OUT OF STOCK

C4Labs Zebra Zero Plus for Raspberry Pi Zero

PRODUCT ID: 3004

Wrap your new little Raspberry Pi Zero in protective and elegant wooden plates with the Zebra Zero Plus ! The Zebra Zero Plus includes a breadboard...

Wrap your new little Raspberry Pi Zero in protective and elegant wooden plates with the Zebra Zero Plus ! The Zebra Zero Plus includes a breadboard for prototyping making this a nice and full-on prototyping platform for you and your Pi Zero. There's also a GPIO pin header reference chart etched on the back for reference. As is the case with all of our favorite enclosures, all of the pins on the Pi are easily accessible from the top! We also have...

$14.95

IN STOCK

Pimoroni Enviro pHAT for Raspberry Pi Zero

PRODUCT ID: 3194

Ideal for monitoring conditions in your house, garage, and more, the Pimoroni Enviro pHAT packs 4 different sensors, letting you measure...

Ideal for monitoring conditions in your house, garage, and more, the Pimoroni Enviro pHAT packs 4 different sensors, letting you measure temperature, pressure, light level, color, 3-axis motion, compass heading, and analog inputs. That's up to 10 different variables! Snap it on top of a Raspberry Pi Zero (or really, any Raspberry Pi with a 2x20 connector) for a comprehensive environment-sensing pHAT powered directly from the Pi....

$19.95

OUT OF STOCK

Pimoroni Explorer pHAT for Raspberry Pi Zero

PRODUCT ID: 3018

The Explorer pHAT is the perfect prototyping side-kick for your Raspberry Pi. Based on Pimoroni's popular Explorer Hat Pro, this is a...

The Explorer pHAT is the perfect prototyping side-kick for your Raspberry Pi. Based on Pimoroni's popular Explorer Hat Pro, this is a smaller cheaper version designed to fit perfectly on a Raspberry Pi Zero! A heap of useful input and output options have been added that will take your projects to the next level. Great for driving motors, using analog sensors, and interfacing with 5V sensors & systems Though designed to...

$12.50

80 IN STOCK

C4Labs Zebra Zero for Raspberry Pi Zero

PRODUCT ID: 3003

Wrap your new little Raspberry Pi Zero in protective and elegant wooden plates with the Zebra Zero ! A simple and versatile installation makes...

Wrap your new little Raspberry Pi Zero in protective and elegant wooden plates with the Zebra Zero ! A simple and versatile installation makes this case one of our favorites. The clever C4 nuts used to hold the case together can accept a screw from either end so if you want to install a PiHAT it can be secured to the nuts on the other side! A straight or right-angle GPIO header can be soldered in from either side of the board too. We also...

$6.95

IN STOCK

Pimoroni Scroll pHAT - 11x5 LED Matrix for Raspberry Pi Zero

PRODUCT ID: 3017

Let your Pi talk back with this slick little 11x5 LED matrix Scroll pHAT ! The Scroll pHAT provides a matrix of 55 white LED pixels that is...

Let your Pi talk back with this slick little 11x5 LED matrix Scroll pHAT ! The Scroll pHAT provides a matrix of 55 white LED pixels that is ideal for writing messages, showing graphs, and drawing pictures. Use it to output your IP address, show CPU usage, or just play very-low-rez pong! Though designed to match the format of the Raspberry Pi Zero it is compatible with all 40-pin GPIO Raspberry Pi variants (2/B+/A+). Features: 55 white...

$12.50

IN STOCK

Pimoroni Unicorn pHAT - 4x8 RGB LED Shield for Raspberry Pi

PRODUCT ID: 3181

Snap the Pimoroni Unicorn pHAT on top of a Raspberry Pi Zero (or really, any Raspberry Pi with a 2x20 connector) for a fun 4x8 RGB LED...

Snap the Pimoroni Unicorn pHAT on top of a Raspberry Pi Zero (or really, any Raspberry Pi with a 2x20 connector) for a fun 4x8 RGB LED matrix powered directly from the Pi. The Unicorn pHAT provides a wash of controllable color that is ideal for mood-lighting, 4x8 pixel art, persistence of vision effects, status indications, or just blasting color into your surroundings. 34 fully controllable RGB LEDs (SK6218 - 3.5mm x...

$14.95

OUT OF STOCK

Ethernet Hub and USB Hub w/ Micro USB OTG Connector

PRODUCT ID: 2992

One can never have enough socks, or USB ports. Add some more USB and Ethernet capability to your Raspberry Pi Zero or, really, any kind of...

One can never have enough socks, or USB ports. Add some more USB and Ethernet capability to your Raspberry Pi Zero or, really, any kind of tablet or computer with an OTG connector with this USB 2.0 and Ethernet Hub ! This handy combo-hub has 3 USB 2.0 ports, and a AX88772A Ethernet transceiver. This chipset is really common and can be used by any Linux, Mac or Windows computer. It's particularly handy for the Raspberry Pi...

$14.95

IN STOCK

Pimoroni pHAT DAC for Raspberry Pi Zero

PRODUCT ID: 3016

If music be the food of love, play on. But make sure you use this super little pHAT DAC to get the best out of your Raspberry Pi audio! The pHAT DAC...

If music be the food of love, play on. But make sure you use this super little pHAT DAC to get the best out of your Raspberry Pi audio! The pHAT DAC provides a super affordable high-quality DAC for the Raspberry Pi. Pumping out 24-bits at 192KHz of audio goodness from the Raspberry Pi's I2S interface on the 2x20 pin GPIO header. Since it's digital audio, it sounds really good, much better than the onboard analog audio. The 3.5mm...

$14.95

27 IN STOCK

Raspberry Pi Zero v1.3 Camera Cable

PRODUCT ID: 3157

This camera cable is specifically designed to work with the Raspberry Pi Zero - Version 1.3! Just plug it into your Pi Zero's camera port and...

This camera cable is specifically designed to work with the Raspberry Pi Zero - Version 1.3! Just plug it into your Pi Zero's camera port and then the other end into one of the official Pi Cameras for photo & video joy. The Raspberry Pi Zero is NOT included in this product! If you're looking to buy a Raspberry Pi Zero, check out our selection of packs here!

$5.95

IN STOCK

Adafruit Perma Proto Bonnet Mini Kit

PRODUCT ID: 3203

Design your own Bonnet or pHAT, attach custom circuitry and otherwise dress your Pi Zero with this jaunty prototyping Bonnet kit! To add to the...

Design your own Bonnet or pHAT, attach custom circuitry and otherwise dress your Pi Zero with this jaunty prototyping Bonnet kit! To add to the Adafruit Bonnet party, we have this Perma-Proto inspired plug in daughter board. It has a grid of 0.1" prototyping soldering holes for attaching chips, resistors, LED, potentiometers and more. The holes are connected underneath with traces to mimic the solderless breadboards with...

$4.50

IN STOCK

Pimoroni Micro Dot pHAT with Included LED Modules - Red

PRODUCT ID: 3248

Looking for an unashamedly old school LED matrix display board? Lookie here! The Pimoroni Micro Dot pHAT is made up of six red LED...

Looking for an unashamedly old school LED matrix display board? Lookie here! The Pimoroni Micro Dot pHAT is made up of six red LED matrices, each 5x7 pixels (for an effective display area of 30x7) plus a decimal point, using the beautiful little Lite-On LTP-305 matrices. Perfect for building a retro scrolling message display, a tiny 30-band spectrum analyzer, or a retro clock. Far out! As with the other pHATs, it works with all of the...

$29.95

66 IN STOCK

Red Bear IoT pHAT for Raspberry Pi - WiFi + BTLE

PRODUCT ID: 3283

So you've got your Pi 3 with its built-in wireless LAN and Bluetooth, but what about your Pi Zero? Say hello to the IoT pHAT from Red...

So you've got your Pi 3 with its built-in wireless LAN and Bluetooth, but what about your Pi Zero? Say hello to the IoT pHAT from Red Bear! This Zero-size board provides WiFi (802.11bgn / 2.4GHz) and Bluetooth (v4.1 / BTLE) connectivity direct from the GPIO header. You don’t need to use a dongle plugged into the Pi Zero’s solitary data micro-USB port via a USB OTG adapter. Just snap it on top of a Raspberry Pi...

$16.95

IN STOCK

Pi Supply PaPiRus Zero ePaper/eInk pHAT v1.2

PRODUCT ID: 3335

PaPiRus Zero is an ePaper / eInk screen pHAT designed for the Raspberry Pi Zero. It’s one of the first true low power displays for the Pi Zero...

PaPiRus Zero is an ePaper / eInk screen pHAT designed for the Raspberry Pi Zero. It’s one of the first true low power displays for the Pi Zero mini computer. ePaper / eInk is a display technology that mimics the appearance of ink on normal paper. Unlike conventional displays, ePaper reflects light – just like ordinary paper – and is capable of holding text and images indefinitely, even without electricity. Because of this,...

$34.95

IN STOCK

PiJack Ethernet HAT for Pi Zero

PRODUCT ID: 3374

PiJack is a HAT (yes, a proper HAT, not a pHAT!) add-on board for the Raspberry Pi Zero mini computer that makes connecting your Pi Zero to the...

PiJack is a HAT (yes, a proper HAT, not a pHAT!) add-on board for the Raspberry Pi Zero mini computer that makes connecting your Pi Zero to the Internet via Ethernet super simple. If you're fed up with flaky WiFi and want your Pi Zero to be online all the time, then this HAT is for you! PiJack is a neat little board with an Ethernet controller and standard RJ45 connector so you can hook your Pi up to your home or office...

$14.95

74 IN STOCK

GPIO Hammer Headers - Solderless Raspberry Pi Connectors - Male + Female + Installation Jig

PRODUCT ID: 3413

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni...

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need. They come in both male and female, and use crafty little retaining nubbins to grip tightly into the holes on the PCB. Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to...

$6.50

8 IN STOCK

Adafruit Raspberry Pi Zero Case

PRODUCT ID: 3252

This is a basic, classic Pi Zero enclosure with a black base and a clear top. The case is as minimal as it gets, coming in just two pieces of...

This is a basic, classic Pi Zero enclosure with a black base and a clear top. The case is as minimal as it gets, coming in just two pieces of polycarbonate that snap snugly together. This case will keep your Pi Zero safe and secure while also looking super sleek. You can use all of the connectors on the edges of the Pi: mini HDMI, microSD slot, microUSB power, and microUSB port. There's also a cut out to allow a 2x20-pin header to...

$4.75

IN STOCK

Red Bear IoT pHAT for Raspberry Pi - WiFi + BTLE - unassembled

PRODUCT ID: 3329

So you've got your Pi 3 with its built-in wireless LAN and Bluetooth, but what about your Pi Zero? Say hello to the IoT pHAT from Red...

$16.95

IN STOCK

Adafruit Animated Eyes Bonnet for Raspberry Pi Mini Kit - Without Displays

PRODUCT ID: 3356

The Snake Eyes Bonnet is a Raspberry Pi accessory for driving two 128x128 pixel OLED or TFT LCD...

The Snake Eyes Bonnet is a Raspberry Pi accessory for driving two 128x128 pixel OLED or TFT LCD displays, and also provides four analog inputs for sensors. It's perfect for making cosplay masks, props, spooky sculptures for halloween, animatronics, robots...anything where you want to add a pair of animated eyes! This product is just the Pi Bonnet itself, and some headers so you can...

$7.95

IN STOCK

Zero4U - 4 Port USB Hub for Raspberry Pi Zero v1.3

PRODUCT ID: 3298

One can never have enough socks, or USB ports. Add some more USB capability to your Raspberry Pi Zero with the Zero4U ! This is...

One can never have enough socks, or USB ports. Add some more USB capability to your Raspberry Pi Zero with the Zero4U ! This is a 4-port USB hub for Raspberry Pi Zero, and it can be mounted back-to-back onto a Pi Zero. The 4 pogo pins on the back will connect the PP1, PP6, PP22 and PP23 testing pads on your Raspberry Pi Zero – no soldering required! This item can only work with the Zero W if a ferrite ring is...

$9.95

IN STOCK

Pimoroni Automation pHAT for Raspberry Pi Zero

PRODUCT ID: 3352

Do you need a solution for home automation, hydroponics, light industrial automation, and other related predicaments? Pimoroni's Automation...

Do you need a solution for home automation, hydroponics, light industrial automation, and other related predicaments? Pimoroni's Automation pHAT – the little sibling of the Automation HAT – is the most compact way to take control of and monitor your world! Pimoroni has pulled together a great set of features into this home monitoring and automation controller. With a relay, analog channels, powered...

$12.95

IN STOCK

Pimoroni Speaker pHAT for Raspberry Pi Zero

PRODUCT ID: 3401

The Pimoroni Speaker pHAT crams an I2S DAC and mono amplifier, a tiny 8Ω 2W speaker, and a 10 LED bar graph all onto one teeny little...

The Pimoroni Speaker pHAT crams an I2S DAC and mono amplifier, a tiny 8Ω 2W speaker, and a 10 LED bar graph all onto one teeny little pHAT. It's the neatest way to add audio to your Pi project, and its beautiful artwork evokes an 80s boombox! Pimoroni isn't claiming audiophile sound quality, but it's perfect for fun little projects where you want to add sound output – speech, notification sounds, or light...

$12.95

33 IN STOCK

Adafruit Arcade Bonnet for Raspberry Pi with JST Connectors - Mini Kit

PRODUCT ID: 3422

Playing retro games is easy on a Raspberry Pi - and that pocket-sized computer is pretty good at it too! All you need is a little help to connect...

Playing retro games is easy on a Raspberry Pi - and that pocket-sized computer is pretty good at it too! All you need is a little help to connect buttons and a joystick up and you can custom design your own arcade console, desktop or stand-up machine, even just a simple controller box. It makes for a fun weekend project that will last all year. This Adafruit Arcade Bonnet is designed to make small emulator projects a little easier to build....

$14.95

IN STOCK

ModMyPi Pi Zero Case - Frost/Clear

PRODUCT ID: 3288

Still searching for the Pi Zero enclosure that works for you? Try out this fully injection molded Raspberry Pi Zero case from ModMyPi! Designed...

Still searching for the Pi Zero enclosure that works for you? Try out this fully injection molded Raspberry Pi Zero case from ModMyPi! Designed to optimise protection whilst maintaining device useability, this Pi Zero case consists of a 3-part clip together construction with microSD card cover and embossed Raspberry Pi Foundation logo, which acts as a ventilation point for heat extraction. Each case features a top and bottom GPIO...

$5.95

IN STOCK

Adafruit I2S 3W Stereo Speaker Bonnet for Raspberry Pi - Mini Kit

PRODUCT ID: 3346

Hey Mr. DJ! Turn up that Raspberry Pi mix to the max with this cute 3W Stereo Amplifier Bonnet for Raspberry Pi . (It's not big...

Hey Mr. DJ! Turn up that Raspberry Pi mix to the max with this cute 3W Stereo Amplifier Bonnet for Raspberry Pi . (It's not big enough to be an official HAT, so we called it a bonnet, you see?) It's the exact same size as a Raspberry Pi Zero but works with any and all Raspberry Pi computers with a 2x20 connector - A+, B+, Zero, Pi 2, Pi 3, etc. We've tested it out with Raspbian (the official operating system) and...

$12.95

IN STOCK

Adafruit Joy Bonnet for Raspberry Pi

PRODUCT ID: 3464

Pocket-sized fun is the name of this game, with the Joy Bonnet – our most fun Bonnet ever (no we didn't even think that was...

Pocket-sized fun is the name of this game, with the Joy Bonnet – our most fun Bonnet ever (no we didn't even think that was possible, either!). This Bonnet fits perfectly on top of your Raspberry Pi Zero (any kind) and gives you adorable hand-held arcade controls. Once you install our script onto your Pi, the controls will act like a keyboard, for easy use with any emulator or media player. Personally, we found this Bonnet...

$14.95

OUT OF STOCK

Raspberry Pi Zero v1.3 Camera Pack - Includes Pi Zero

PRODUCT ID: 3170

Warning! This does NOT include the new Pi Zero W. This includes the original Pi Zero v1 model, which does not include...

Warning! This does NOT include the new Pi Zero W. This includes the original Pi Zero v1 model, which does not include built-in Bluetooth and WiFi. If you are trying to buy the trendy new Pi Zero W Camera Pack click here! Note: Due to popular demand, there might be some delay in shipping products containing Pi Zero! We've got to hand it to the Pi Foundation - adding a camera port to the already awesome Pi...

$39.95

IN STOCK

Raspberry Pi Zero W Camera Pack - Includes Pi Zero W

PRODUCT ID: 3414

Note: Due to popular demand, there might be some delay in shipping products containing Pi Zero W! We've got to hand it to the Pi Foundation -...

Note: Due to popular demand, there might be some delay in shipping products containing Pi Zero W! We've got to hand it to the Pi Foundation - adding a camera port and built-in WiFi to the already awesome Pi Zero was a brilliant move. Now you can add one of the awesome Raspberry Pi cameras to your Pi Zero W to make a super low-cost, functional camera. This version includes the 8 MegaPixel Pi Camera. If you're looking for...

$44.95

IN STOCK

Raspberry Pi Zero W NoIR Camera Pack - Includes Pi Zero W

PRODUCT ID: 3415

Note: Due to popular demand, there might be some delay in shipping products containing Pi Zero W! We've got to hand it to the Pi Foundation -...

$44.95

IN STOCK

Raspberry Pi Zero v1.3 NoIR Camera Pack - Includes Pi Zero

PRODUCT ID: 3171

Warning! This does NOT include the new Pi Zero W. This includes the original Pi Zero v1 model, which does not include...

Warning! This does NOT include the new Pi Zero W. This includes the original Pi Zero v1 model, which does not include built-in Bluetooth and WiFi. If you are trying to buy the trendy new Pi Zero W NoIR Camera Pack click here! Note: Due to popular demand, there might be some delay in shipping products containing Pi Zero! We've got to hand it to the Pi Foundation - adding a camera port to the already...

$39.95

IN STOCK

Pi Foundation Raspberry Pi Zero Case + Mini Camera Cable

PRODUCT ID: 3446

The first 'official' Pi Zero case from the Raspberry Pi Foundation is here in Raspberry Pi's sleek pink and white! While we've...

The first 'official' Pi Zero case from the Raspberry Pi Foundation is here in Raspberry Pi's sleek pink and white! While we've had our own classic Pi Zero case for a little while now, the Pi Foundation celebrates the release of the Pi Zero W with this impressive, well-designed effort that is definitely what we've come to expect from the folks who made the Raspberry Pi. The case comes in four parts – a pink...

$5.95

IN STOCK

Pimoroni Scroll pHAT HD – LED Matrix for Raspberry Pi Zero

PRODUCT ID: 3473

What if Scroll pHAT had twice times as many pixels and individual pixel brightness control? Scroll pHAT HD , that's what!! Scroll pHAT HD packs...

What if Scroll pHAT had twice times as many pixels and individual pixel brightness control? Scroll pHAT HD , that's what!! Scroll pHAT HD packs 17x7 bright white pixels (119 total) onto a single pHAT, and gives you full PWM brightness control over each pixel. Create beautiful animations and even anti-aliased text by taking advantage of the per-pixel brightness. Use Scroll pHAT HD as a scrolling message display for your tweets, the weather or...

$12.95

OUT OF STOCK

Pimoroni Four Letter pHAT for Raspberry Pi Zero

PRODUCT ID: 3475

AHOY , wanna spell out some LOVE with this COOL Raspberry Pi FOUR letter PHAT ? Pimoroni's Four Letter pHAT has four 14-segment displays that you...

AHOY , wanna spell out some LOVE with this COOL Raspberry Pi FOUR letter PHAT ? Pimoroni's Four Letter pHAT has four 14-segment displays that you can use to display text, numbers, and a host of other characters. The LEDs are a beautiful retro green, just like your old digital alarm clock. They're driven by the HT16K33 chip over I2C, which does all the multiplexing for you. While it is shaped and sized to match a Pi Zero, it works great...

$10.50

OUT OF STOCK

Pibow Zero W Case for Raspberry Pi Zero W

PRODUCT ID: 3471

Crafted out of four transparent acrylic pieces, the Pibow Zero W Case for Raspberry Pi Zero W protects your Pi while showing it off to the...

Crafted out of four transparent acrylic pieces, the Pibow Zero W Case for Raspberry Pi Zero W protects your Pi while showing it off to the world! Each layer is laser-cut from colorful, lightweight, and high-quality cast acrylic. All of the primary ports and GPIO pins are accessible (it encloses the micro-SD slot). The case is lightweight and ideal for mounting to any surface. No tools are required for assembly or...

$5.95

OUT OF STOCK

Pimoroni Touch pHAT for Raspberry Pi Zero

PRODUCT ID: 3472

The Pimoroni Touch pHAT has six capacitive touch buttons, each with a bright white LED, so you can add a touch interface to your Raspberry Pi. While...

The Pimoroni Touch pHAT has six capacitive touch buttons, each with a bright white LED, so you can add a touch interface to your Raspberry Pi. While it is shaped and sized to match a Pi Zero, it works great with any Pi with 2x20 connector. You can even use a dry erase pen to write on the pads to label their function. The pHAT features a CAP1166 capacitive touch and LED driver chip that is read over I2C. Each pad has a matching LED that can be...

$8.50

OUT OF STOCK

Raspberry Pi / Pi Zero