New Products

Coming soon! Sign up to be notified when these are in stock Make memories, or just a cool camera-based project, with Adafruit's MEMENTO Camera Board. It's a development board with everything you need to create programmable camera and vision projects: with a camera module, TFT preview screen, buttons, SD card slot and driven by a powerful ESP32-S3 with 2 MB of PSRAM...

This is a screen for advanced hackers who like the look of a nice, round TFT screen with tons of pixels. The 2.8" diagonal-sized display has 480x480 16-bit full-color pixels and is an IPS display, so the color looks great up to 80 degrees off-axis in any direction. The TFT driver is ST7701S and uses both SPI and TTL RGB 'dot clock' data. The SPI is only for...

Long gone are the days of parallel ports and serial ports. Now the USB port reigns supreme! But USB is hard, and you just want to transfer your every-day serial data from a microcontroller to computer. What now? Enter the FTDI Friend! The FTDI Friend is a tweaked out FTDI FT232RL chip adapter. Sure, like the well-known FTDI cable, it can provide power to your project...

Hey Mr. DJ! Turn up that Raspberry Pi mix to the max with this cute 3W Stereo Amplifier Bonnet for Raspberry Pi. (It's not big enough to be an official HAT, so we called it a bonnet, you see?) It's the exact same size as a Raspberry Pi Zero but works with any and all Raspberry Pi computers with a 2x20 connector - A+, B+, Zero, Pi 2, Pi 3, Pi 4, etc. We've tested it...

This is a Panasonic lithium manganese rechargeable coin cell with a pre-fitted two-pin JST plug and an adhesive mounting pad. Designed for use as a long term battery backup for Raspberry Pi 5 computers.

This is a screen for advanced hackers who like the look of a loooooooong rectangular bar TFT screen with tons of pixels. The 4.58" rectangular display has 320x960 16-bit full-color pixels and is an IPS display, so the color looks great up to 80 degrees off-axis in any direction. This version does not have a touchscreen. The TFT driver is ST7701S and uses both SPI and...

This is a screen for advanced hackers who like the look of a loooooooong rectangular bar TFT screen with tons of pixels. The 3.7" rectangular display has 240x960 18-bit full-color pixels and is an IPS display, so the color looks great up to 80 degrees off-axis in any direction. This version does not have a touchscreen. The TFT driver is ST7701S and uses both SPI and...

Add some jazz & pizazz to your project with a color touchscreen LCD. This TFT display is big (3.5" diagonal) bright (6 white-LED backlight) and colorful! 480x320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128x64 display, and double our 2.8" TFT. As a bonus, this display has a capacitive touchscreen attached to it...

We carry a few different GPS modules here in the Adafruit shop, but none that satisfied our every desire - that's why we designed this little GPS breakout board. We believe this is the Ultimate GPS module, so we named it that. It's got everything you want and more: -165 dBm sensitivity, 10 Hz updates, 66 channels. 5V friendly design and only 20mA current draw....

Yes, this is a cute little 5" TFT display with WVGA 800x480 resolution and a cute little driver board. We tried to get the smallest display that would be good for embedded computing usage and at a good price. And we also tried to match it with a small driver board that can be powered from a USB port. The visible display measures 5" diagonal and is a 'raw' TTL display...

What's better than a single LED? Lots of LEDs! And what's better than lots of LEDs? TWO TIMES AS MANY LEDS!!! With the 16x8 LED Matrix Backpack we've doubled your project's matrix capacity by making it super easy to get two separate 8x8 matrices onto one handy board! Matrices like these are 'multiplexed' - so to control 64 LEDs you need 16 pins and to control 128...

Spice up your Feather project with a beautiful 3.5" touchscreen display shield with built in microSD card socket. This TFT display is 3.5" diagonal with a bright 6 white-LED backlight. You get a massive 480x320 pixels with individual 16-bit color pixel control. It has way more resolution than a black and white 128x64 display, and twice as much as our 2.4" TFT...

Hobby-level microcontrollers are finally getting big and powerful enough to start handling camera modules that historically would have required a full computer or FPGA to handle. The RP2040 and ESP32-Sx series of chips, for example, have enough pins to communicate with the 8-bit data output, DMA to quickly grab a frame, and the necessary RAM to buffer a raw snapshot....

Hobby-level microcontrollers are finally getting big and powerful enough to start handling camera modules that historically would have required a full computer or FPGA to handle. The RP2040 and ESP32-Sx series of chips, for example, have enough pins to communicate with the 8-bit data output, DMA to quickly grab a frame, and the necessary RAM to buffer a raw snapshot....

Hobby-level microcontrollers are finally getting big and powerful enough to start handling camera modules that historically would have required a full computer or FPGA to handle. The RP2040 and ESP32-Sx series of chips, for example, have enough pins to communicate with the 8-bit data output, DMA to quickly grab a frame, and the necessary RAM to buffer a raw snapshot....

Hobby-level microcontrollers are finally getting big and powerful enough to start handling camera modules that historically would have required a full computer or FPGA to handle. The RP2040 and ESP32-Sx series of chips, for example, have enough pins to communicate with the 8-bit data output, DMA to quickly grab a frame, and the necessary RAM to buffer a raw snapshot....

What's Metro-shaped and has an ESP32-S3 WiFi module? What has a STEMMA QT connector for I2C devices and a Lipoly charger circuit? What has your favorite Espressif WiFi microcontroller and lots of memory for your next IoT project? That's right - it's the new Adafruit Metro ESP32-S3! With native USB and a load of octal PSRAM, this board is perfect for use with...

With its freely available development resources, ESP32-S3-BOX-3 is the ultimate choice for prototyping new projects or building complex AIoT systems. Espressif Systems (688018.SH) is excited to announce the latest addition to its lineup of development kits, ESP32-S3-BOX-3. This fully open-source AIoT development kit is based on the powerful ESP32-S3 AI SoC, and is...

Many microcontrollers have ADCs these days, for reading analog/resistive sensors like potentiometers, thermistors, LDR light sensors, etc. but sometimes you need MOAR! Or maybe you're using a single board computer like a Raspberry Pi that has no ADCs at all! The Adafruit ADS7830 8-Channel 8-Bit ADC with I2C is an affordable 8-channel ADC with I2C interface, so it's...

By popular request, you can now get our 8x8 LED backpacks without the LEDs! These backpacks feature an HT16K33 I2C LED driver, they're simple and easy to use - you can use our very nice library for the backpacks to get running in under half an hour. If you've been eyeing matrix displays but hesitated because of the complexity, this is the solution you've been looking...

The Raspberry Pi is an amazing single board computer - and one of the best parts is that GPIO connector! 40 pins of digital goodness you can twiddle to control LEDs, sensors, buttons, radios, displays - just about any device you can imagine. This Adafruit GPIO Expander Bonnet will give you even more digital deliciousness - 16 more digital input/output pins are yours...

This 500mm long camera cable is specifically designed to work with the Raspberry Pi 5 series. Just plug it into your Pi 5's camera port and then the other end into one of the official Pi Cameras for photo and video joy. Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use the same 22-way,...

Coming soon! This 500mm long display cable is specifically designed to work with the Raspberry Pi 5 series. Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use the same 22-pin, 0.5mm-pitch “mini” FPC format as the Compute Module Development Kit, and require adapter cables to...

The Raspberry Pi 5 is the newest Raspberry Pi computer, and the Pi Foundation knows you can always make a good thing better! And what could make the Pi 5 better than the 4? How about a faster processor, USB 3.0 ports, and an updated Gigabit Ethernet chip with PoE capability? Good guess - that's exactly what they did! The Raspberry Pi 5 is the latest product in the...

The Raspberry Pi 5 is the newest Raspberry Pi computer, and the Pi Foundation knows you can always make a good thing better! And what could make the Pi 5 better than the 4? How about a faster processor, USB 3.0 ports, and an updated Gigabit Ethernet chip with PoE capability? Good guess - that's exactly what they did! The Raspberry Pi 5 is the latest product in the...

Most projects these days have multiple power supplies: say a battery or DC wall plug or USB for multiple powering options. Juggling these to have seamless hot-swap while avoiding back-powering is always a bit of a challenge: you want to keep things small, cheap, low power and of course reduce as much voltage drop as possible. The Adafruit LM66200 Dual Ideal Diode...

The Raspberry Pi 5 Active Cooler is compatible with the Raspberry Pi 5 and the Raspberry Pi 5 Case. Designed for anyone who wants to push the performance of their Pi, as well as overclockers and other power users, it keeps your Raspberry Pi 5 at a comfortable operating temperature even when under heavy load thanks to both a mini heatsink that goes on top of your CPU...

This 300mm long camera cable is specifically designed to work with the Raspberry Pi 5 series. Just plug it into your Pi 5's camera port and then the other end into one of the official Pi Cameras for photo and video joy. Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use the same 22-way,...

This 200mm long camera cable is specifically designed to work with the Raspberry Pi 5 series. Just plug it into your Pi 5's camera port and then the other end into one of the official Pi Cameras for photo and video joy. Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use the same 22-way,...

This 300mm long display cable is specifically designed to work with the Raspberry Pi 5 series. Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use the same 22-pin, 0.5mm-pitch “mini” FPC format as the Compute Module Development Kit, and require adapter cables to connect to the...

This 200mm long display cable is specifically designed to work with the Raspberry Pi 5 series. Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use the same 22-pin, 0.5mm-pitch “mini” FPC format as the Compute Module Development Kit, and require adapter cables to connect to the...

This is a screen for advanced hackers who like the look of a nice, round TFT screen with tons of pixels. This massive 4" diagonal-sized display has 720x720 16-bit full-color pixels and is an IPS display, so the color looks great up to 80 degrees off-axis in any direction. The TFT driver is ST7701S and uses both SPI and TTL RGB 'dot clock' data. The SPI is only for...

The INA228 is an amazing power monitoring chip, with best-of-everything support: up to 85VDC common-mode, high or low side measurements, 20-bit (!) ADC for precision measurements from milliamp to Amp, and I2C interface for easy configuration of alerts, oversampling, gain adjustments and more! This breakout board may well be the last current sensing solution you every...

The ESP32-S3-Korvo-2 is a multimedia development board based on the ESP32-S3 chip. It is equipped with a two-microphone array, which is great for voice recognition and near/far-field voice wake-up applications. The board can integrate multiple peripherals such as LCD, camera, and microSD card. It also supports JPEG video stream processing. With all of its outstanding...

These cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05") pitch SWD programming connectors. We see these connectors often on ARM Cortex dev kits and have a few handy in our ARM dev box. We thought you might want a backup cable as well, so now they are in the Adafruit shop! One cable per order. The ribbon cable is 0.06mm/0.025"...

This is a screen for advanced hackers who like the look of a square TFT screen with tons of pixels. The 3.4" square display has 480x48016-bit full-color pixels and is an IPS display, so the color looks great up to 80 degrees off-axis in any direction. This version does not have a touchscreen. The TFT driver is ST7701S and uses both SPI and TTL RGB 'dot clock' data....

This is a screen for advanced hackers who like the look of a rectangle TFT screen with tons of pixels. The 3.2" square display has 320x820 RGB666 16-bit full-color pixels and is an IPS display, so the color looks great up to 80 degrees off-axis in any direction. This version does not have a touchscreen. The TFT driver is ST7701S and uses both SPI and TTL RGB 'dot...

A Feather board without ambition is a Feather board without FeatherWings! Spice up your Feather project with a beautiful 2.4" touchscreen display shield with built in microSD card socket. This TFT display is 2.4" diagonal with a bright 4 white-LED backlight. You get 240x320 pixels with individual 16-bit color pixel control. It has way more resolution than a black and...

One of our favorite Feathers, the Feather M4 Express, gets a glow-up here with an upgrade to the SAME51 chipset which has built-in CAN bus support! Like its SAMD51 cousin, the ATSAME51J19 comes with a 120MHz Cortex M4 with floating point support and 512KB Flash and 192KB RAM. Your code will zig and zag and zoom, and with a bunch of extra peripherals for support, this...