Search Results for "terminal block"

Nothing makes a project harder to maintain than a lot of loose wiring. That's why we like to use terminal blocks whenever making PCB-to-Wire connections. These particular 3.5mm terminal blocks are our favorite: big enough for a range of wire gauges, easy to adjust with a screwdriver, and not too chunky. The only down-side is that they do not fit into 2.5mm spaced...

We've got a simple and highly functional solution to wiring your Adafruit Feather board! These 0.1" Pitch Terminal Blocks, are exactly the right size to it your Feather board or FeatherWing. They are great news since nothing makes a project harder to maintain than a lot of loose wiring. Perfect when you don't need a full Terminal Block FeatherWing These terminal...

Connect this to that without soldering using these quick terminal blocks. They allow connecting of two sets of four wires together using just a flat-head screwdriver. These are UL rated to carry up to 15 Amps, so they're great for high current LED strips! Can be used with wires from 14AWG to 22 AWG

Nothing makes a project harder to maintain than a lot of loose wiring. That's why we like to use terminal blocks whenever making PCB-to-Wire connections. These particular 3.5mm terminal blocks are our favorite: big enough for a range of wire gauges, easy to adjust with a screwdriver, and not too chunky. The only down-side is that they do not fit into 2.5mm spaced...

This one's going out to all the makers and designers who love using terminal blocks for wiring up their projects. This adapter plate is perfect for industrial / robotics projects with a lot of wires. You connect your Raspberry Pi Pico to this breakout PCB, which comes with a plastic enclosure with screw-mount nubs at each end. Attach to any surface by drilling two...

This one's going out to all the makers and designers who love using terminal blocks for wiring up their projects. This adapter plate is perfect for industrial / robotics projects with a lot of wires. You connect your Raspberry Pi Pico to this breakout PCB. All wires are broken out into terminal blocks, so you can connect and power your sensors, displays,...

The Terminal Block Breakout FeatherWing kit is like the Golden Eagle of prototyping FeatherWings (eg. majestic, powerful, good-looking). To start, you get a nice prototyping area underneath your Feather, with extra pads for ground, 3.3V and SDA/SCL. Not one to stop there, we expanded the PCB out to 2" x 2.5" with 3.5mm pitch terminal blocks down each side. There's...

If you need to connect an RJ-45 cable (a.k.a Ethernet) to a board that doesn't have an Ethernet socket - this adapter will come in very handy! This is an Ethernet (RJ-45) Terminal Block to Socket Adapter. There is a standard RJ-45 Ethernet socket on one end and a terminal block on the other. No soldering required! Just unscrew the terminal blocks and slide in your...

With the Pi-EzConnect you can connect all sorts of electronics to a single Raspberry Pi with no soldering or breadboarding! This HAT has screw-terminals for each pin on the Pi Header Key features: Solderless or soldered connections for all GPIO’s on a Raspberry Pi. Mini proto area for adding components. Add standard male or female headers for breadboard like...

One truth about working with test equipment is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block BNC (Bayonet Neill–Concelman, for those in the know) connectors so much. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs. This is the BNC Female...