Search Results for "plug power adapter"

If you need to connect a battery pack or wired power supply to a board that has a DC jack - this adapter will come in very handy! There is a 2.1mm DC plug on one end, and a screw terminal block on the other. The terminals are labeled with positive/negative assuming a positive-tip configuration (which is the most common)

Wow, is this not the most useful thing you did not know existed or what? It's a switching wall adapter where you can easily change the voltage! It's like a benchtop supply you can take with you anywhere. This model is 10 Watts and has 6 selectable outputs ranging from 3V to 12VDC and up to 1.5A output. It has a 2-prong plug but takes 110VAC to 240VAC so you can use...

This is a beefy switching supply, for when you need a lot of power! It can supply 5V DC up to 10 Amps, running from 110V or 220V power (the plug it comes with is for US/Canada/Japan but you can use any plug adapter for your country, or just replace the cable with a standard computer/appliance power cord) The output connects to a 2.1mm DC plug. There's a green LED...

This is a beefy switching supply, for when you need a lot of power! It can supply 12V DC up to 5 Amps, running from 110V or 220V power (the plug it comes with is for US/Canada/Japan but you can use any plug adapter for your country, or just replace the cable with a standard 'figure-8' cable). The output connects to a 2.1mm DC plug. There's a green indicator light to...

Add lots more USB capability to your Raspberry Pi or computer using this powered USB 2.0 hub. It adds a full seven powered ports, all at USB 2.0 speeds so you can use video cameras and other high speed devices (cheaper hubs are v1.1 and not as fast!) The extra sauce with this hub is that you can power it with an external 5V adapter. There's a 2 Amp adapter included,...

The SEGGER J-Link BASE is identical to the cheaper J-Link EDU model except for the terms of use. If you're going to use your debugger strictly for personal, non-commercial projects, such as publishing open source designs that you're not selling, then you should get the EDU version! It's the same but significantly cheaper. On the other hand if you're making money, or...

Put your Snap! cassette on and sing along to "I got the power!" with this super useful power supply adapter where you can easily change the voltage with a snap of your fingers. On the front are a potentiometer knob and a LED 7-segment digital display. Twist the knob and look at the output voltage to range from 3V to 24V DC. It's kinda like a benchtop supply you can...

Put your Snap! cassette on and sing along to "I got the power!" with this super useful power supply adapter where you can easily change the voltage with a snap of your fingers. On the front is a potentiometer knob and a LED 7-segment digital display. Twist the knob and look at the output voltage to range from 3 to 12V DC. It's kinda like a benchtop supply you can...

The premise of this MicroUSB Plug to 5.5/2.1mm Jack adapter is simple. There's a MicroUSB plug on one end and a 5.5mm/2.1mm DC barrel jack with center positive polarity on the other. This allows you to connect one of our 5V 2 Amp, 5V 4A or 5V 10 Amp adapters to something that expects to connect to 5V USB. We also have a shorty adapter-without-cable version Since this...

Not to be confused with ODB, OBD stands for On Board Diagnostics and is used for analyzing and diagnosing vehicles. It's the thing your mechanic plugs into to find out why you've got a blinking engine light. Technically, OBD uses CAN bus and, hey, whaddya know, we've got some CAN-capable microcontroller boards here at Adafruit so this OBD Plug (16-pin) to DE-9 (DB-9)...