SEARCH RESULTS FOR: eink

... in the Adafruit Blog

... in the Adafruit Customer Support Forums

PRODUCTS:

Adafruit eInk Breakout Friend with 32KB SRAM

PRODUCT ID: 4224

Add some bi-stability to your life with an Adafruit EInk Breakout Friend - your fun pal who's happy to lend a hand when you want to work with...

Add some bi-stability to your life with an Adafruit EInk Breakout Friend - your fun pal who's happy to lend a hand when you want to work with EInk/E-Paper displays. Luckily for us, just about every small-medium size EInk display made these days has a standard 24-pin connection. This breakout will add all the power supply support circuitry and level shifting so you can attach your favorite display (up to tri-color 4.2") and wire it up to...

$8.50

72 IN STOCK

Adafruit eInk Feather Friend with 32KB SRAM

PRODUCT ID: 4446

Easy e-paper finally comes to your Feather with this Adafruit EInk Feather Friend that's designed to make it a breeze to add an eInk...

Easy e-paper finally comes to your Feather with this Adafruit EInk Feather Friend that's designed to make it a breeze to add an eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight...

$8.95

IN STOCK

24-pin eInk / ePaper Extension Cable 0.5mm Pitch - 25cm Long

PRODUCT ID: 4230

When you need more distance between you and your eInk display, use this 24-pin 0.5mm pitch FPC cable with an extender adapter to streeeeeeeeeetch it...

When you need more distance between you and your eInk display, use this 24-pin 0.5mm pitch FPC cable with an extender adapter to streeeeeeeeeetch it out. The cable is generic, but we recommend it for use with eInk because often folks want to mount the displays elsewhere. Just carefully pry open the connector on the eInk Friend , eInk Feather Friend , etc, and use this cable instead. Then connect the (not included) extender adapter between the...

$1.50

93 IN STOCK

Pimoroni Inky pHAT - eInk Display - Black/White

PRODUCT ID: 3934

Here at Adafruit we never tire of cool, new displays, so these super sweet e-paper displays really caught our eye! Pimoroni's Inky pHat is a...

Here at Adafruit we never tire of cool, new displays, so these super sweet e-paper displays really caught our eye! Pimoroni's Inky pHat is a petite 212x104 pixel two-color display that looks fantastic and is easy to read even in bright daylight. Broadcast your tweets, the weather, or even graphing data. eInk is great for displays that don't change often, due to the 3-second display-change-cycle. But the...

$24.95

29 IN STOCK

Circuit Playground Tri-Color E-Ink Gizmo - E-Ink Display + Audio Amplifier

PRODUCT ID: 4428

Extend and expand your Circuit Playground projects with a bolt on E-Ink Gizmo that lets you add a lovely tri-color e-Ink display in a sturdy and...

Extend and expand your Circuit Playground projects with a bolt on E-Ink Gizmo that lets you add a lovely tri-color e-Ink display in a sturdy and reliable fashion. This PCB looks just like a round E-Ink breakout but has permanently affixed M3 standoffs that act as mechanical and electrical connections. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper...

$24.95

84 IN STOCK

Pimoroni Inky wHAT (ePaper/eInk/EPD) - Red/Black/White

PRODUCT ID: 4143

In the beginning there was Inky pHAT, a triumvirate of eInk bonnets from Pimoroni. And now, Pimoroni has upped their electronic paper...

In the beginning there was Inky pHAT, a triumvirate of eInk bonnets from Pimoroni. And now, Pimoroni has upped their electronic paper displays to 4.2" glorious inches! Say hellooo to Inky wHAT ! You get 5x the number of pixels (400x300!) to use as an e-reader or maybe a weather display / calendar. Everything comes fully-assembled, so there's no soldering required! The display is securely plonked down to the Inky wHAT...

$64.95

11 IN STOCK

Pimoroni Inky wHAT (ePaper/eInk/EPD) - Black/White

PRODUCT ID: 4142

In the beginning there was Inky pHAT, a triumvirate of eInk bonnets from Pimoroni. And now, Pimoroni has upped their electronic...

$54.95

9 IN STOCK

Pimoroni Inky pHAT - 3 Color eInk Display - Yellow/Black/White

PRODUCT ID: 3933

What's that, you say? Pimoroni has another new super sweet tri-color e-paper display? Oh feast your eyes! This Inky pHat...

What's that, you say? Pimoroni has another new super sweet tri-color e-paper display? Oh feast your eyes! This Inky pHat in Yellow/Black/White is a petite 212x104 pixel three-color display that looks fantastic and is easy to read even in bright daylight. Broadcast your tweets, the weather, or even graphing data. eInk is great for displays that don't change often, due to the...

$26.50

58 IN STOCK

Pi Supply PaPiRus Zero ePaper/eInk pHAT v1.2

PRODUCT ID: 3335

PaPiRus Zero is an ePaper / eInk screen pHAT designed for the Raspberry Pi Zero. It’s one of the first true low power displays for the Pi Zero...

PaPiRus Zero is an ePaper / eInk screen pHAT designed for the Raspberry Pi Zero. It’s one of the first true low power displays for the Pi Zero mini computer. ePaper / eInk is a display technology that mimics the appearance of ink on normal paper. Unlike conventional displays, ePaper reflects light – just like ordinary paper – and is capable of holding text and images indefinitely, even without electricity. Because of this,...

$34.95

9 IN STOCK

PaPiRus 2.7" eInk Display HAT for Raspberry Pi from Pi Supply

PRODUCT ID: 3420

The PaPiRus Screen HAT from Pi Supply is an ePaper / eInk screen HAT designed for the Raspberry Pi. Think of it as the older sibling of the...

The PaPiRus Screen HAT from Pi Supply is an ePaper / eInk screen HAT designed for the Raspberry Pi. Think of it as the older sibling of the PaPiRus Zero. ePaper / eInk is a display technology that mimics the appearance of ink on normal paper. Unlike conventional displays, ePaper reflects light – just like ordinary paper – and is capable of holding text and images indefinitely, even without electricity. Because of this, ePaper...

MORE INFO

DISCONTINUED

Adafruit 2.9" Grayscale eInk / ePaper Display FeatherWing - 4 Level Grayscale

PRODUCT ID: 4777

Easy e-paper comes to your Feather with this breakout that's designed to make it a breeze to add a monochrome eInk display....

Easy e-paper comes to your Feather with this breakout that's designed to make it a breeze to add a monochrome eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight...

NOTIFY ME

$22.50

OUT OF STOCK

Adafruit 2.13" Monochrome E-Ink Bonnet for Raspberry Pi - THINK INK

PRODUCT ID: 4687

Easy e-paper finally comes to Raspberry Pi, with this bonnet that's designed to make it a breeze to add a 2.13" 250x122 crisp...

Easy e-paper finally comes to Raspberry Pi, with this bonnet that's designed to make it a breeze to add a 2.13" 250x122 crisp monochromic eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and...

$19.95

IN STOCK

Adafruit 2.13" Monochrome eInk / ePaper Display FeatherWing - 250x122 Monochrome

PRODUCT ID: 4195

Easy e-paper finally comes to your Feather, with this breakout that's designed to make it a breeze to add a monochrome eInk display. Chances...

Easy e-paper finally comes to your Feather, with this breakout that's designed to make it a breeze to add a monochrome eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable....

$22.50

IN STOCK

Adafruit 2.13" Monochrome eInk / ePaper Display with SRAM - 250x122 Monochrome

PRODUCT ID: 4197

Easy e-paper finally comes to microcontrollers, with this breakout that's designed to make it a breeze to add a monochromatic eInk display....

Easy e-paper finally comes to microcontrollers, with this breakout that's designed to make it a breeze to add a monochromatic eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight...

$22.50

1 IN STOCK

2.9" Flexible Monochrome eInk / ePaper Display - 296x128 Monochrome

PRODUCT ID: 4262

Woah, the cyber-future is here! Flexible E-Ink has been demo'd at high tech events for years but now you can actually get your paws on it. This...

Woah, the cyber-future is here! Flexible E-Ink has been demo'd at high tech events for years but now you can actually get your paws on it. This display is true E-Ink / E-Paper, once an image is displayed it will stay even once you remove all power. The image is also high contrast and very daylight readable. It really does look just like printed paper! This flexible display sports a 2.9" monochrome (black and white) display ....

$26.95

65 IN STOCK

2.13" Flexible Monochrome eInk / ePaper Display - 212x104 Monochrome

PRODUCT ID: 4243

Woah, the cyber-future is here! Flexible E-Ink has been demo'd at high tech events for years but now you can actually get your paws on it. This...

$17.50

IN STOCK

Adafruit 1.54" Monochrome eInk / ePaper Display with SRAM - 200x200 Monochrome

PRODUCT ID: 4196

Easy e-paper finally comes to microcontrollers, with this breakout that's designed to make it a breeze to add a eInk display. Chances are...

Easy e-paper finally comes to microcontrollers, with this breakout that's designed to make it a breeze to add a eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really...

$24.95

68 IN STOCK

RePaper - 1.44" Graphic eInk Development Board - SG020

PRODUCT ID: 1347

Ever since the Kindle eReader came out, we've been wanting a nice small graphical eInk display that is easy to use with a microcontroller. And...

Ever since the Kindle eReader came out, we've been wanting a nice small graphical eInk display that is easy to use with a microcontroller. And finally our desires have been fulfilled with the rePaper 1.44" development board from Pervasive Displays! We're excited to offer this very interesting display breakout for hackers who want to start playing with small eInk displays. This kit comes with a driver board that is powered from 3V...

MORE INFO

DISCONTINUED

RePaper - 2.7" Graphic eInk Development Board - SM027

PRODUCT ID: 1346

Ever since the Kindle eReader came out, we've been wanting a nice small graphical eInk display that is easy to use with a microcontroller. And...

Ever since the Kindle eReader came out, we've been wanting a nice small graphical eInk display that is easy to use with a microcontroller. And finally our desires have been fulfilled with the rePaper 2.7" development board from Pervasive Displays! We're excited to offer this very interesting display breakout for hackers who want to start playing with small eInk displays. This kit comes with a driver board that is powered from 3V and...

MORE INFO

DISCONTINUED

RePaper - 2.0" Graphic eInk Development Board - SG020

PRODUCT ID: 1316

Ever since the Kindle eReader came out, we've been wanting a nice small graphical eInk display that is easy to use with a microcontroller. And...

Ever since the Kindle eReader came out, we've been wanting a nice small graphical eInk display that is easy to use with a microcontroller. And finally our desires have been fulfilled with the rePaper 2.0" development board from Pervasive Displays! We're excited to offer this very interesting display breakout for hackers who want to start playing with small eInk displays. This kit comes with a driver board that is powered from 3V and...

MORE INFO

DISCONTINUED

Adafruit 2.9" Tri-Color eInk / ePaper Display FeatherWing - Red Black White

PRODUCT ID: 4778

Easy e-paper comes to your Feather with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances are...

Easy e-paper comes to your Feather with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It...

$22.50

65 IN STOCK

Adafruit 2.13" Tri-Color eInk / ePaper Display FeatherWing - Red Black White

PRODUCT ID: 4128

Easy e-paper finally comes to your Feather, with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances are...

Easy e-paper finally comes to your Feather, with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It...

NOTIFY ME

$24.95

OUT OF STOCK

Adafruit 2.13" Tri-Color eInk / ePaper Display with SRAM - Red Black White

PRODUCT ID: 4086

Easy e-paper finally comes to microcontrollers, with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances...

Easy e-paper finally comes to microcontrollers, with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable....

$22.50

59 IN STOCK

Adafruit 2.7" Tri-Color eInk / ePaper Display with SRAM - Red Black White

PRODUCT ID: 4098

Easy e-paper finally comes to microcontrollers, with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances...

$32.50

66 IN STOCK

Adafruit 1.54" Tri-Color eInk / ePaper Display with SRAM - Red Black White

PRODUCT ID: 3625

Easy e-paper finally comes to microcontrollers, with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances...

NOTIFY ME

$22.50

OUT OF STOCK

Adafruit 2.7" Tri-Color eInk / ePaper Shield with SRAM - Red Black White

PRODUCT ID: 4229

Easy e-paper finally comes to microcontrollers, with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances...

$39.95

IN STOCK

Pimoroni Inky pHAT for Raspberry Pi - 3 Color eInk Display

PRODUCT ID: 3743

Here at Adafruit we never tire of cool, new displays, so these super sweet tri-color e-paper displays really caught our eye! Pimoroni's Inky pHat...

Here at Adafruit we never tire of cool, new displays, so these super sweet tri-color e-paper displays really caught our eye! Pimoroni's Inky pHat is a petite 212x104 pixel three-color display that looks fantastic and is easy to read even in bright daylight. Broadcast your tweets, the weather, or even graphing data. eInk is great for displays that don't change often, due to the 3-second display-change-cycle....

$26.50

87 IN STOCK

Adafruit 2.9" Red/Black/White eInk Display Breakout - THINK INK

PRODUCT ID: 1028

Easy e-paper finally comes to microcontrollers, with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances...

$34.95

45 IN STOCK

Adafruit SHARP Memory Display Breakout - 2.7" 400x240 Monochrome

PRODUCT ID: 4694

The Adafruit 2.7" 400x240 SHARP Memory Display Breakout is a chonky cross between an eInk (e-paper) display and an LCD. It has the...

The Adafruit 2.7" 400x240 SHARP Memory Display Breakout is a chonky cross between an eInk (e-paper) display and an LCD. It has the ultra-low power usage of eInk and the fast-refresh rates of an LCD. This model has a gray background, and the pixels show up as black-on-gray for a nice e-reader type display. It does not have a backlight, but it is daylight readable. For dark/nighttime reading you may need to illuminate the...

$44.95

76 IN STOCK

Raspberry Pi Zero W Budget Pack - Includes Pi Zero W

PRODUCT ID: 3410

Remember those cereal commercials that would always say, "part of a complete breakfast"? Well the Pi Zero's a lot like that bowl...

Remember those cereal commercials that would always say, "part of a complete breakfast"? Well the Pi Zero's a lot like that bowl of cereal - while it's great on its own, you need a lot of accessories to make it a complete meal. The Pi Zero W Budget Pack is almost everything you need to get going with your WiFi-enabled Pi Zero W and make it a complete meal. Note: Due to popular demand, there might be...

$34.50

IN STOCK

Adafruit SHARP Memory Display Breakout - 1.3" 168x144 Monochrome

PRODUCT ID: 3502

The 1.3" 168x144 SHARP Memory LCD display is a cross between an eInk (e-paper) display and an LCD. It has the ultra-low power usage of eInk and...

The 1.3" 168x144 SHARP Memory LCD display is a cross between an eInk (e-paper) display and an LCD. It has the ultra-low power usage of eInk and the fast-refresh rates of an LCD. This model has a gray background, and pixels show up as black-on-gray for a nice e-reader type display. It does not have a backlight, but it is daylight readable. For dark/night reading you may need to illuminate the LCD area with external LEDs. The bare...

$24.95

IN STOCK

Raspberry Pi Zero W Basic Pack - Includes Pi Zero W

PRODUCT ID: 3409

Remember those cereal commercials that would always say, "part of a complete breakfast"? Well the Pi Zero's a lot like that bowl...

Remember those cereal commercials that would always say, "part of a complete breakfast"? Well the Pi Zero's a lot like that bowl of cereal - while it's great on its own, you need a lot of accessories to make it a complete meal. The Pi Zero W Basic Pack is the barest of essentials that you'll need to get going with your WiFi-enabled Pi Zero W and make it a complete meal. This pack includes: ...

$24.50

IN STOCK

Raspberry Pi Zero W Starter Pack - Includes Pi Zero W

PRODUCT ID: 3411

Remember those cereal commercials that would always say, "part of a complete breakfast"? Well the Pi Zero's a lot like that bowl...

Remember those cereal commercials that would always say, "part of a complete breakfast"? Well the Pi Zero's a lot like that bowl of cereal - while it's great on its own, you need a lot of accessories to make it a complete meal. The Pi Zero W Starter Pack is everything you need to get going with your WiFi-enabled Pi Zero W and make it a complete meal. Note: Due to popular demand, there might be some...

$59.95

59 IN STOCK

SHARP Memory Display Breakout - 1.3" 96x96 Silver Monochrome

PRODUCT ID: 1393

The 96x96 resolution SHARP Memory LCD is no longer made, but we have a higher-resolution 168x144 display available in the shop at...

The 96x96 resolution SHARP Memory LCD is no longer made, but we have a higher-resolution 168x144 display available in the shop at https://www.adafruit.com/product/3502 The 1.3" SHARP Memory LCD display is a cross between an eInk (e-paper) display and an LCD. It has the ultra-low power usage of eInk and the fast-refresh rates of an LCD. This model has a matt silver background, and pixels show up as little mirrors for a silver-reflective...

MORE INFO

DISCONTINUED

Pixel Qi 10" Display with Controller- 1024x600 HDMI/VGA/NTSC/PAL

PRODUCT ID: 1303

We're really excited to offer the revolutionary Pixel Qi display, a full color screen that can also be used in daylight. The Qi has three modes -...

We're really excited to offer the revolutionary Pixel Qi display, a full color screen that can also be used in daylight. The Qi has three modes - backlit color, backlit grayscale and daylight grayscale. In normal office/indoor use you'll want to go with keeping the backlight on to reveal the color layer. The screen works just like any other 10" TFT with fast refresh (not like slow e-ink). When a bright light shines on it, the...

MORE INFO

DISCONTINUED

Pink and Purple Braided USB A to Micro B Cable - 2 meter long

PRODUCT ID: 4148

This cable is super-fashionable with a woven pink and purple Blinka-like pattern! First let's talk about the cover and over-molding. We...

This cable is super-fashionable with a woven pink and purple Blinka-like pattern! First let's talk about the cover and over-molding. We got these in custom colors, and if you have to have visible cables, then you might as well have the nicest fabric-bound cable with a eye-catching python pattern. Perfect for connecting to your PyPortal, Circuit Playground Express, Raspberry Pi, CircuitPython board among...

MORE INFO

DISCONTINUED

Pink Shortening microSD card adapter for Raspberry Pi & Macbooks

PRODUCT ID: 1692

Adding shortening to a Pi makes it fatter - but this kind of shortening makes your Pi a little slimmer! This short-style, pink microSD adapter slides...

Adding shortening to a Pi makes it fatter - but this kind of shortening makes your Pi a little slimmer! This short-style, pink microSD adapter slides in where the SD card goes but is 9mm shorter. This makes it stick out a lot less and makes for a more elegant (and less accident-prone) Pi. All you have to do is pop in a microSD card for a sleeker machine! The outer edge of the SD adapter has a deep groove for a fingernail to pull on for removal....

MORE INFO

DISCONTINUED

ST-Link STM8/STM32 v2 Programmer & Emulator

PRODUCT ID: 2548

Explore new microcontroller worlds with an ST-Link Programmer & Emulator / Debugging dongle. This little USB stick contains a microcontroller...

Explore new microcontroller worlds with an ST-Link Programmer & Emulator / Debugging dongle. This little USB stick contains a microcontroller with the code for ST's classic programmer/emulator for STM8 and STM32 bit processors. Since STM's are so common, this tool will come in handy whenever you encounter them. You can even get 5V and regulated 3.3V power! Comes with one USB stick and a couple pieces of female-female jumpers. You may...

NOTIFY ME

$12.50

OUT OF STOCK

Heat Sink Thermal Tape - 3M 8810 - 80mm x 80mm

PRODUCT ID: 1468

Get that heat sink stuck on good and strong with 3M's thermal tape. Specifically designed for attaching heat sinks to ICs. Works better and is...

Get that heat sink stuck on good and strong with 3M's thermal tape. Specifically designed for attaching heat sinks to ICs. Works better and is less messy than thermal glues or pastes because the thickness is even across the area. A perfect match for our range of small heat sinks, either in aluminum or copper. Comes in a square of 80mm x 80mm (3" square) - but can be cut into any shape or size. For more information about 3M's 8810...

NOTIFY ME

$4.50

OUT OF STOCK

Heat Sink Thermal Tape - 3M 8810 - 25mm x 25mm

PRODUCT ID: 1467

Get that heat sink stuck on good and strong with 3M's thermal tape. Specifically designed for attaching heat sinks to ICs. Works better and is...

Get that heat sink stuck on good and strong with 3M's thermal tape. Specifically designed for attaching heat sinks to ICs. Works better and is less messy than thermal glues or pastes because the thickness is even across the area. A perfect match for our range of small heat sinks, either in aluminum or copper. Comes in a square of 25mm x 25mm (1" square) - but can be cut into any shape or size. For more information about 3M's 8810...

$0.95

IN STOCK

Aluminum Heat Sink for Raspberry Pi 3 - 14 x 14 x 8mm

PRODUCT ID: 3083

Looking for a nice way to cool down your Raspberry Pi 3? Check out this 14x14x8 Heat Sink! This heat sink is made from high quality...

Looking for a nice way to cool down your Raspberry Pi 3? Check out this 14x14x8 Heat Sink! This heat sink is made from high quality aluminum and will work perfectly with any Raspberry Pi but is best paired with a Raspberry Pi 3 since it can run a little hot. It comes with thermal adhesive already applied to the back making installation super easy. Clean the surface of the chip of any dust or grease then peel off the...

$1.50

IN STOCK

Aluminum Heat Sink for Raspberry Pi 3 or 4 - 15 x 15 x 15mm

PRODUCT ID: 3082

Looking for the best heat sink for your Raspberry Pi? Check out this nice and tall 15x15x15mm Heat Sink! This heat sink is made from high quality...

Looking for the best heat sink for your Raspberry Pi? Check out this nice and tall 15x15x15mm Heat Sink! This heat sink is made from high quality aluminum and will work perfectly with any Raspberry Pi but is best paired with a Raspberry Pi 3 or 4 since it can run a little hot. It comes with thermal adhesive already applied to the back making installation super easy. Clean the surface of the chip of any dust or grease then peel off the...

$1.95

IN STOCK

SEGGER J-Link EDU Mini - JTAG/SWD Debugger

PRODUCT ID: 3571

Doing some serious development on any ARM-based platform, and tired of 'printf' plus an LED to debug? A proper JTAG/SWD HW debugger can make...

Doing some serious development on any ARM-based platform, and tired of 'printf' plus an LED to debug? A proper JTAG/SWD HW debugger can make debugging more of a pleasure and less of a pain. It allows you to program your devices at the click of a button, read or write memory addresses or registers on a live system, temporarily halt program execution at a given location or condition, and much more. Essentially, it's a direct window...

$19.95

IN STOCK

SEGGER J-Link EDU - JTAG/SWD Debugger

PRODUCT ID: 1369

The SEGGER J-Link EDU is identical to the more expensive J-Link BASE model except for the terms of use . If you're going to use your debugger...

The SEGGER J-Link EDU is identical to the more expensive J-Link BASE model except for the terms of use . If you're going to use your debugger strictly for personal, non-commercial projects, such as publishing open source designs that you're not selling, then you should get this EDU version! It's the same but significantly cheaper. On the other hand if you're making money, or plan to make money off your project, go and pick up the...

$69.95

IN STOCK

Fully Reversible Pink/Purple USB A to micro B Cable - 1m long

PRODUCT ID: 4111

This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also fully reversible! That's right, you...

This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also fully reversible! That's right, you will save seconds a day by not having to flip the cable around. First let's talk about the cover and over-molding. We got these in custom colors, and if you have to have visible cables, then you might as well have the nicest fabric-bound cable with a eye-catching python pattern. Perfect for...

$3.95

IN STOCK

High Brightness Pink Electroluminescent (EL) Wire - 2.5 meters - High brightness, long life

PRODUCT ID: 404

EL Wire, also known as Electroluminescent wire is a stiff wire core coated with phosphor and then covered with a protective PVC sheath. When an AC...

EL Wire, also known as Electroluminescent wire is a stiff wire core coated with phosphor and then covered with a protective PVC sheath. When an AC signal is applied to it, it glows an aqua (blue green) color. You can make it look different colors by changing the coating, for example this is a vivid pink. It looks a little like thin neon. Very bendable, it keeps its shape and you can curl it around your finger. Its an easy way to add some glow to...

$12.00

14 IN STOCK

SEGGER J-Link BASE - JTAG/SWD Debugger

PRODUCT ID: 2209

The SEGGER J-Link BASE is identical to the cheaper J-Link EDU model except for the terms of use . If you're going to use your debugger...

The SEGGER J-Link BASE is identical to the cheaper J-Link EDU model except for the terms of use . If you're going to use your debugger strictly for personal, non-commercial projects, such as publishing open source designs that you're not selling, then you should get the EDU version! It's the same but significantly cheaper. On the other hand if you're making money, or plan to make money off your project, then you're...

$399.95

25 IN STOCK

Conductive Silver Ink Pen - Micro Tip - CW2200MTP

PRODUCT ID: 515

Experiment with paper electronics with this silver conductive ink pen that will let you draw traces! We like the make of this pen, it has a nice...

Experiment with paper electronics with this silver conductive ink pen that will let you draw traces! We like the make of this pen, it has a nice liquid silver ink that flows easily, and it works great. In just 3 minutes from opening the packaging, we made the image above, a coin cell holder with an LED. There are two 'tips' available - standard and micro. The microtip allows for finer control but is a little harder to use (because it...

$49.95

6 IN STOCK

Thermochromic Pigment - Pink - 10g

PRODUCT ID: 4140

We love playing with obscure materials that have a creepy-cool or magical quality. Sure, there's invisible ink, but have you ever used heat...

We love playing with obscure materials that have a creepy-cool or magical quality. Sure, there's invisible ink, but have you ever used heat to make a painting disappear? We're carrying these Thermochromic Pigments in a variety of colors. This pigment is a lovely Ada Pink . It changes to a light/white color at 31 ° C or 88 ° F. How to get started on your next masterpiece? Just add a little water then paint any...

$4.95

15 IN STOCK

Fluorescent Pigment - Pink

PRODUCT ID: 4123

We're with the squad back at New York's hottest cyberpunk club, Near Field Commune(ication), and it's still got ...

We're with the squad back at New York's hottest cyberpunk club, Near Field Commune(ication), and it's still got everything , Adabot & the Circuit Playground, Collin's wondrous, mind-blowing, heart-stirring Pulse Room, and more! And you are dressed to the cyber-nine's, with wearable LEDs, EL tape, a full set of glittering RFID/NFC Nail Stickers, and some...

$9.95

28 IN STOCK

Conductive Silver Ink Pen - Standard Tip - CW2200STP

PRODUCT ID: 514

There are two 'tips' available - standard and micro. The microtip allows for finer control but is a little harder to use (because it...

There are two 'tips' available - standard and micro. The microtip allows for finer control but is a little harder to use (because it doesn't deposit as much silver at once).The CW2200STP (standard tip pen) has an orifice size of 1 mm and will draw traces that will average 2.0 mm in width. The CW2200MTP (micro-tip pen) has an orifice size of 0.7 mm and will draw traces that average 1.5 mm in width. See the image above with a...

MORE INFO

DISCONTINUED

Bluefruit EZ-Link Shield - Bluetooth Arduino Serial & Programmer - v1.3

PRODUCT ID: 1628

Note: This product is currently undergoing a revision and will be available again soon! We are excited to add another product to our growing...

Note: This product is currently undergoing a revision and will be available again soon! We are excited to add another product to our growing Adafruit Bluefruit line, this time it's the Bluefruit EZ-Link Shield: the best Bluetooth Serial shield ever made. Like you, we have purchased all sorts of Bluetooth shields with high expectations - we just wanted something that worked! But nothing ever did exactly what we wanted: there was always...

MORE INFO

DISCONTINUED

Bluefruit EZ-Link - Bluetooth Serial Link & Arduino Programmer - v1.3

PRODUCT ID: 1588

We are excited to add another product to our growing Adafruit Bluefruit line, this time it's the Bluefruit EZ-Link: the best Bluetooth Serial...

We are excited to add another product to our growing Adafruit Bluefruit line, this time it's the Bluefruit EZ-Link: the best Bluetooth Serial Link device ever made. Like you, we have purchased all sorts of Bluetooth serial link modules, with high expectations - we just wanted something that worked! But nothing ever did exactly what we wanted: there was always some configuration modes to wade through, and using one of those other modules to...

MORE INFO

DISCONTINUED

Mini Aluminum Heat Sink for Raspberry Pi - 13 x 13 x 3mm

PRODUCT ID: 3084

Looking for an ultra-thin heat sink for your Raspberry Pi 3? Check out this nice and slim 13x13x3mm Heat Sink! This heat sink is made from high...

Looking for an ultra-thin heat sink for your Raspberry Pi 3? Check out this nice and slim 13x13x3mm Heat Sink! This heat sink is made from high quality aluminum and will work perfectly with any Raspberry Pi but is best paired with a Raspberry Pi 3 since it can run a little hot. It comes with thermal adhesive already applied to the back making installation super easy. Clean the surface of the chip of any dust or grease then peel...

$0.95

IN STOCK

Aluminum SMT Heat Sink - 0.26"x0.26" square - 0.39" tall

PRODUCT ID: 1493

If you want to heat sink a SoC, motor driver, linear regulator, FET or other surface-mount package part, you might find yourself struggling to find a...

If you want to heat sink a SoC, motor driver, linear regulator, FET or other surface-mount package part, you might find yourself struggling to find a good heat sink. These extra-tall extra-small mini heat sinks are easy to use and give you an extra thermal boost. The heat sink is a 0.26" x 0.26" (6.75mm x 6.75mm) square with 3 tall 'fins' sticking out the top. The total height is 0.39" (10mm) but you can easily file...

$0.95

53 IN STOCK

Aluminum SMT Heat Sinks 10 Pack - 0.25"x0.25" x 0.15" tall

PRODUCT ID: 1515

If you want to heat sink a SoC, motor driver, linear regulator, FET or other surface-mount package part, you might find yourself struggling to find a...

If you want to heat sink a SoC, motor driver, linear regulator, FET or other surface-mount package part, you might find yourself struggling to find a good heat sink. These little extra-small mini heat sinks are easy to use and give you an extra thermal boost. They're also a great deal, you get a pack of 10 in each order! The heat sink is a 0.25" x 0.25" (6.5mm x 6.5mm) square with 9 little 'fins' sticking out the top. The...

$4.95

22 IN STOCK

Aluminum SMT Heat Sink - 0.27"x0.27" square

PRODUCT ID: 1043

If you want to heat sink a SoC, motor driver, or other surface-mount package part, you might find yourself struggling to find a good heat sink. These...

If you want to heat sink a SoC, motor driver, or other surface-mount package part, you might find yourself struggling to find a good heat sink. These sinks from Cool Innovations are beloved by our favorite engineers for their low cost, ease of use and low thermal resistance! The heat sink is a 0.27" x 0.27" (6.7mm x 6.7mm) square with four round 'fins' sticking out the top. The total height is 0.3" (7.6mm) but you can...

MORE INFO

DISCONTINUED

Aluminum SMT Heat Sink - 0.4"x0.4" square

PRODUCT ID: 1042

If you want to heat sink a SoC, motor driver, or other surface-mount package part, you might find yourself struggling to find a good heat sink. These...

If you want to heat sink a SoC, motor driver, or other surface-mount package part, you might find yourself struggling to find a good heat sink. These sinks from Cool Innovations are beloved by our favorite engineers for their low cost, ease of use and low thermal resistance! The heat sink is a 0.4" x 0.4" (10mm x 10mm) square with nine round 'fins' sticking out the top. The total height is 0.3" (7.6mm) but you can easily...

MORE INFO

DISCONTINUED

Aluminum SMT Heat Sink - 0.5"x0.5" square

PRODUCT ID: 1041

If you want to heat sink a SoC, motor driver, or other surface-mount package part, you might find yourself struggling to find a good heat sink. These...

If you want to heat sink a SoC, motor driver, or other surface-mount package part, you might find yourself struggling to find a good heat sink. These sinks from Cool Innovations are beloved by our favorite engineers for their low cost, ease of use and low thermal resistance! The heat sink is a 0.5" x 0.5" (12.5mm x 12.5mm) square with nine round 'fins' sticking out the top. The total height is 0.4" (10mm) but you can...

MORE INFO

DISCONTINUED

Adafruit LED Sequins - Rose Pink - Pack of 5

PRODUCT ID: 1792

Sew a little sparkle into your wearable project with an Adafruit LED Sequin. These are the kid-sister to our popular Flora NeoPixel, they only show a...

Sew a little sparkle into your wearable project with an Adafruit LED Sequin. These are the kid-sister to our popular Flora NeoPixel, they only show a single color and they don't have digital control, but that makes them smaller easier to use for many projects. Simply connect 3 to 6VDC to the + pin and ground to the - pin, and the LED on the board will light up. You can make the LEDs fade and twinkle by using the PWM (a.k.a. analogWrite)...

$3.95

IN STOCK

EL wire starter pack - Pink 2.5 meter (8.2 ft)

PRODUCT ID: 588

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in Pink. 2.5 meters is...

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in Pink. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Pocket EL inverter runs on 2 AA Alkaline or rechargeable batteries (not included) 2 inches of heat shink, both 1/8" and 1/4" for protecting the EL wire after soldering if you end up wanting to change...

NOTIFY ME

$19.95

OUT OF STOCK

Arcade Button - 30mm Translucent Pink

PRODUCT ID: 472

A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own. They're the same size as common...

A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own. They're the same size as common arcade controls (often referred to as 30mm diameter) but have some nice things going for them that justify the extra dollar. First, they look fantastic, all 6 colors have a crystal translucent glossy look. Although they do not have LEDs built in, we're confident that sticking a diffused LED...

$5.95

23 IN STOCK

Maker-Friendly Zipper Case - Pink

PRODUCT ID: 3699

How many pockets does an OTG (On The Go) maker need to carry their boards, wires, miscellanea when away from their desk? The world may...

How many pockets does an OTG (On The Go) maker need to carry their boards, wires, miscellanea when away from their desk? The world may never know. Instead of chucking your Raspberry Pi or Metro M0 Express into the abyss of your cargo pants, backpack, or purse, you can pick up a candy-colored Zipper Case ! We got one of these with some electronics we bought online and fell in love with it as these are the exact perfect size...

$2.50

34 IN STOCK

No-Touchy Stick Pointer in Pink

PRODUCT ID: 4598

Here's an interesting solution for protecting your hands from germs while pressing elevator buttons, gripping handles and doorknobs, and the...

Here's an interesting solution for protecting your hands from germs while pressing elevator buttons, gripping handles and doorknobs, and the like. This handheld stick-grip-pointer gives you tactile accessibility without touching potentially contaminated surfaces. You can poke elevator buttons and open door handles (will not work on round doorknobs). Soak the sponge with 70% iso-propyl alcohol to disinfect between uses. Pair it...

$4.50

44 IN STOCK

Pi Model A+ Case Base - Pink

PRODUCT ID: 2373

Now that we have The Single Greatest Raspberry Pi Model A+ Case Ever - we decided to make it even better by adding COLORS!!!!! Mix...

Now that we have The Single Greatest Raspberry Pi Model A+ Case Ever - we decided to make it even better by adding COLORS!!!!! Mix and match snap-on lids and bases to form your favorite combinations. Buy one base then match different colored lids to your room or outfit. Or buy all of them so that you can adjust your Pi A+'s case based on your mood, your favorite sports team, or even your aura....

$5.00

IN STOCK

Volta Racers Solar Motorcar Kit - Pink

PRODUCT ID: 1522

Never go looking for some AAA's again, this solar racer car requires no batteries! The Volta Racer Solar Motorcar Kit contains all of the...

Never go looking for some AAA's again, this solar racer car requires no batteries! The Volta Racer Solar Motorcar Kit contains all of the necessary parts required to successfully assemble your car - including the worlds first flexible polycrystalline silicon solar cell used for powering toys. No special tools or batteries are required - just your hands! Makes for a great first electronics toy or project. For children ages 6 years and older...

MORE INFO

DISCONTINUED

Fiber Optic Light Source - 1 Watt - Pink

PRODUCT ID: 4169

This is a pretty neat way to glow up. Light in the fiber optic cable zooms through the core by constantly bouncing off of the edge of the molded...

This is a pretty neat way to glow up. Light in the fiber optic cable zooms through the core by constantly bouncing off of the edge of the molded plastic, a principle called "total internal reflection" (which also kinda sounds like a very expensive meditation island retreat). When the light pipe doesn't have total reflection, you can get a nifty lighting effect from the light illuminating the plastic tubing. All you need...

$6.95

25 IN STOCK

EL Flowing Effect Wire with Inverter - Pink 2.0 meter (6.5 ft)

PRODUCT ID: 953

If you want to make your EL project a little more dynamic, you can swap in this nifty 'flowing effect' EL wire for the every-day stuff....

If you want to make your EL project a little more dynamic, you can swap in this nifty 'flowing effect' EL wire for the every-day stuff. Instead of a single core, this wire is actually a bundle of three thin EL wires. Inside the inverter is a little timer that will cycle through the strands to make it look like its moving. There's a wheel to adjust the speed and a button to select the mode. The three modes are 'all on',...

MORE INFO

DISCONTINUED

NinjaFlex - 1.75mm Diameter - Flamingo Pink - 0.50 Kg

PRODUCT ID: 2565

Looking beyond ABS? Tired of PLA? Open a world of possibilities, limited only by your imagination. NinjaFlex, a cutting-edge filament for 3D...

Looking beyond ABS? Tired of PLA? Open a world of possibilities, limited only by your imagination. NinjaFlex, a cutting-edge filament for 3D printers, is a specially formulated thermoplastic elastomer (TPE) that produces flexible prints with elastic properties. Patent pending technology allows for smooth feeding and clean, high-quality printed parts. NinjaFlex's unique flexibility and smooth feeding characteristics enable you to create in...

MORE INFO

DISCONTINUED

Raspberry Pi Model A+ Case Lid - Pink

PRODUCT ID: 2372

Now that we have The Single Greatest Raspberry Pi Model A+ Case Ever - we decided to make it even better by adding COLORS!!!!! Mix...

$2.00

IN STOCK

LPCXpresso LPC1347 Development Board with LPC-Link

PRODUCT ID: 1342

The LPC1347 LPCXpresso board is part of NXP's LPCXpresso eco-system of low cost development boards based around the free (GCC and Eclipse-based)...

The LPC1347 LPCXpresso board is part of NXP's LPCXpresso eco-system of low cost development boards based around the free (GCC and Eclipse-based) LPCXpresso IDE. All LPCXpresso boards include an on-board hardware SWD/JTAG debugger, so you don't need any additional hardware (other than a USB mini-B cable) to start some serious debugging (including setting and stepping through breakpoints, etc.). The LPCXpresso boards are actually two separate...

MORE INFO

DISCONTINUED

LPCXpresso LPC1769 Development Board with LPC-Link

PRODUCT ID: 1341

If you want a fast, modern MCU that has just about everything covered for you, the ARM Cortex-M3 based LPC1769 is a pretty reliable choice! 120MHz...

If you want a fast, modern MCU that has just about everything covered for you, the ARM Cortex-M3 based LPC1769 is a pretty reliable choice! 120MHz ARM Cortex-M3 MCU with 512 kB flash and 64 kB SRAM Full-Speed (12 Mb/s) USB 2.0 with on-chip PHY with support for USB device, host and OTG Ethernet support (with dedicated DMA for high speed memory transfers) Four UARTs, CAN 2.0, Three SPI buses, Three I2C buses, and I2S for audio 12-bit ADC and...

MORE INFO

DISCONTINUED

Pi Model B+ / Pi 2 / Pi 3 Case Base - Pink

PRODUCT ID: 2255

Now that we have The Single Greatest Raspberry Pi Model B+ / Pi 2 Case Ever - we decided to make it even better by adding ...

Now that we have The Single Greatest Raspberry Pi Model B+ / Pi 2 Case Ever - we decided to make it even better by adding COLORS!!!!! Mix and match snap-on lids and bases to form your favorite combinations. Buy one base then match different colored lids to your room or outfit. Or buy all of them so that you can adjust your Pi B+'s case based on your mood, your favorite sports team, or even...

MORE INFO

DISCONTINUED

Circuit board necktie "Resistor" - Olive with gold ink, narrow

PRODUCT ID: 573

Resistor. Super detailed resistors and capacitors oh my! How can you resist? Impress any nerdy guy or girl: computer scientist, programmer,...

Resistor. Super detailed resistors and capacitors oh my! How can you resist? Impress any nerdy guy or girl: computer scientist, programmer, electrician, engineer or maker. Is dad, grandpa, boyfriend or husband a tinkerer with solder and blinky things? Perfect for groomsmen and brides boys of the geeky persuasion. Nerd power! Circuit board necktie "Resistor" - Olive with gold ink, narrow. 100% Polyester microfiber necktie. We're...

MORE INFO

DISCONTINUED

Circuit board necktie "Resistor" - Black with silver ink, narrow

PRODUCT ID: 486

Resistor. Super detailed resistors and capacitors oh my! How can you resist? Impress any nerdy guy or girl: computer scientist, programmer,...

Resistor. Super detailed resistors and capacitors oh my! How can you resist? Impress any nerdy guy or girl: computer scientist, programmer, electrician, engineer or maker. Is dad, grandpa, boyfriend or husband a tinkerer with solder and blinky things? Perfect for groomsmen and brides boys of the geeky persuasion. Nerd power! Circuit board necktie "Resistor" - Black with silver ink, narrow. 100% Polyester microfiber necktie. We're...

$30.00

2 IN STOCK

Raspberry Pi Model B+ / Pi 2 / Pi 3 Case Lid - Pink

PRODUCT ID: 2247

Now that we have The Single Greatest Raspberry Pi Model B+ / Pi 2 Case Ever - we decided to make it even better by adding ...

MORE INFO

DISCONTINUED

Medium Modular Snap Boxes - SMD component storage - 2 pack - Pink

PRODUCT ID: 433

For storing small parts (especially SMT/SMD components), these little modular boxes are ideal. They have individual clear pop-open covers so you can...

For storing small parts (especially SMT/SMD components), these little modular boxes are ideal. They have individual clear pop-open covers so you can keep only the ones you want open - less risk of mixing up parts or having a spill. The brilliance of these boxes is that they also snap together, in any configuration you want. You can mix all the sizes to make the ideal box for your needs, and add on more containers as necessary. There's a...

$2.95

84 IN STOCK

Flexible Silicone Neon-Like LED Strip - 1 Meter - Pink

PRODUCT ID: 3862

Here at Adafruit we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by these fresh Flexible Silicone...

Here at Adafruit we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by these fresh Flexible Silicone Neon-Like LED Strips ! They look a lot like neon, but without the need for expensive transformers, glass tubing or inert gasses. Super flexible and bendy, they feature a single-color non-addressable LED strip with a solid chunk of translucent silicone rubber as a diffuser. They look incredible, and...

$13.95

9 IN STOCK

IR Break Beam Sensor - 3mm LEDs

PRODUCT ID: 2167

Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR...

Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a receiver across the way which is sensitive to that same light. When something passes between the two, and its not transparent to IR, then the 'beam is broken' and the receiver will let you know. Compared to PIR sensors, breakbeams are faster and allow better control of where you...

NOTIFY ME

$1.95

OUT OF STOCK

IR Break Beam Sensor - 5mm LEDs

PRODUCT ID: 2168

Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR...

NOTIFY ME

$6.50

OUT OF STOCK

USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi

PRODUCT ID: 954

The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a...

The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<->Serial conversion chip and at the end of the 36" cable are four wire - red power, black ground, white RX into USB port, and green TX out of the USB port. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V...

NOTIFY ME

$9.95

OUT OF STOCK

Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates - Version 3

PRODUCT ID: 746

We carry a few different GPS modules here in the Adafruit shop, but none that satisfied our every desire - that's why we designed this little GPS...

We carry a few different GPS modules here in the Adafruit shop, but none that satisfied our every desire - that's why we designed this little GPS breakout board. We believe this is the Ultimate GPS module, so we named it that. It's got everything you want and more: -165 dBm sensitivity, 10 Hz updates, 66 channels5V friendly design and only 20mA current drawBreadboard friendly + two mounting holesRTC battery-compatibleBuilt-in...

NOTIFY ME

$39.95

OUT OF STOCK

USB WiFi (802.11b/g/n) Module with Antenna for Raspberry Pi

PRODUCT ID: 1030

Make your Internet of Things device cable-free by adding super WiFi. Take advantage of the Raspberry Pi and Beagle Bone's USB port to add a low...

Make your Internet of Things device cable-free by adding super WiFi. Take advantage of the Raspberry Pi and Beagle Bone's USB port to add a low cost, but high-reliability wireless link. We tried half a dozen modules to find ones that work well with the Pi and Bone without the need of recompiling any kernels: its supported by the Bone's Angstrom installation that comes with each Bone as well as the Adafruit Occidentalis distribution....

NOTIFY ME

$19.95

OUT OF STOCK

Raspberry Pi NoIR Camera Board v2 - 8 Megapixels

PRODUCT ID: 3100

Snap, snap! The NoIR Camera v2 is the official "night vision" camera board released by the Raspberry Pi Foundation! The Raspberry Pi...

Snap, snap! The NoIR Camera v2 is the official "night vision" camera board released by the Raspberry Pi Foundation! The Raspberry Pi NoIR Camera Board v2 is a high quality 8 megapixel Sony IMX219 image sensor custom designed add-on board for Raspberry Pi, featuring a fixed focus lens. It's capable of 3280 x 2464 pixel static images, and also support 1080p30, 720p60, and 640x480p60/90 video. It attaches to the Pi by way of one...

$29.95

IN STOCK

Peltier Thermo-Electric Cooler Module+Heatsink Assembly - 12V 5A

PRODUCT ID: 1335

This is for people who just want to get cold fast. The 12V Peltier module is mounted onto a 12V heatsink and fan assembly with thermal paste and an...

This is for people who just want to get cold fast. The 12V Peltier module is mounted onto a 12V heatsink and fan assembly with thermal paste and an aluminum clamp. Simply connect to 12V 5A+ power supply and you will see frost appear on the aluminum plate within a minute. This assembly comes with the best Peltier we could get, so it can get even colder than the stand-alone module we stock, but we think the price is worth it. Just sitting on our...

NOTIFY ME

$34.95

OUT OF STOCK

Adafruit USB + Serial LCD Backpack Add-On with Cable

PRODUCT ID: 781

Adding a character display to your project or computer has never been easier with the new Adafruit USB or TTL serial backpack! This custom-designed...

Adding a character display to your project or computer has never been easier with the new Adafruit USB or TTL serial backpack! This custom-designed PCB can connect to the back of any 16x2 or 20x4 character LCD and does everything you could want: printing text, automatic scrolling, setting the backlight, adjusting contrast, making custom characters, turning on and off the cursor, etc. It can even handle our RGB backlight LCDs with full 8-bit PWM...

$12.95

IN STOCK

TO-220 Clip-On Heatsink

PRODUCT ID: 977

Get the most out of your regulators, transistors and other TO-220 packaged chips by clipping on a heat-sink. Your transistor or regulator may...

Get the most out of your regulators, transistors and other TO-220 packaged chips by clipping on a heat-sink. Your transistor or regulator may advertise it can handle high currents but when multiplied by the drop voltage, the Wattage may be too high for the bare chip! Most TO-220's can disipate about 2W's worth without a sink. This basic, and easy-to-use ~25°C/W sink will let you burn about 3 Watts of power through a TO-220 (assuming...

$0.95

64 IN STOCK

Adafruit Ultimate GPS with USB - 66 channel w/10 Hz updates

PRODUCT ID: 4279

The Ultimate GPS module you know and love has a glow-up to let it be easily used with any computer, not just microcontrollers! With the built in...

The Ultimate GPS module you know and love has a glow-up to let it be easily used with any computer, not just microcontrollers! With the built in USB-to-Serial converter, you can now plug-n-play the Ultimate GPS into your computer, laptop, embedded Linux computer, and more. Power and transport data over any micro USB cable, with handy on-board indicator LEDs that let you know fix status and whether data is being received & transmitted. We...

$39.95

6 IN STOCK

USB WiFi (802.11b/g/n) Module: For Raspberry Pi and more

PRODUCT ID: 1012

Make your Internet of Things device cable-free by adding WiFi. Take advantage of the Raspberry Pi and Beagle Bone's USB port to add a low cost,...

Make your Internet of Things device cable-free by adding WiFi. Take advantage of the Raspberry Pi and Beagle Bone's USB port to add a low cost, but high-reliability wireless link. We tried half a dozen modules to find one that works well with the Pi and Bone without the need of recompiling any kernels: its supported by the Bone's Angstrom installation that comes with each Bone as well as the Adafruit Occidentalis distribution. You'll...

NOTIFY ME

$12.95

OUT OF STOCK

Particle Argon - nRF52840 with Mesh and WiFi

PRODUCT ID: 3997

Woohoo, it's time for a Particle Mesh party! And the Particle Argon is bringing it with a mix of Mesh networking and and...

Woohoo, it's time for a Particle Mesh party! And the Particle Argon is bringing it with a mix of Mesh networking and and Wi-Fi, your two most favorite 2.4GHz wireless protocols. The Argon is a powerful Wi-Fi enabled development kit that can act as either a standalone Wi-Fi endpoint or Wi-Fi enabled gateway for Particle Mesh networks. It is based on the Nordic nRF52840, the BLE Cortex M4 with a ton of Flash, RAM and...

NOTIFY ME

$27.50

OUT OF STOCK

Mongoose OS & Google IoT Core Pack w/ Adafruit Feather HUZZAH32

PRODUCT ID: 3606

In collaboration with Google and Mongoose OS, Adafruit's releasing an IoT Core Pack based around our Feather HUZZAH32! This kit includes a...

In collaboration with Google and Mongoose OS, Adafruit's releasing an IoT Core Pack based around our Feather HUZZAH32! This kit includes a pre-soldered Adafruit Feather HUZZAH with ESP32 WiFi and some sensors and components to get you started on your IoT journey. Feather is a development board from Adafruit that, like its namesake, is thin, light and lets you fly. We designed Feather to be a new standard for portable...

NOTIFY ME

$54.95

OUT OF STOCK

Ethernet Shield for Arduino - W5500 Chipset

PRODUCT ID: 2971

The W5500 Ethernet Shield for Arduino from Seeed Studio is a great way to set up your projects with internet connectivity with just a single chip....

The W5500 Ethernet Shield for Arduino from Seeed Studio is a great way to set up your projects with internet connectivity with just a single chip. Similar to the Arduino Ethernet Shield, but with a newer chipset, this ethernet shield supports both TCP and IP Protocols in TCP, UDP, ICMP, IPv4, ARP, IGMP, and PPoE format. The RJ45 ethernet port is also low enough so you can stack another shield on top of it The board includes...

$32.50

IN STOCK

USB C Powered Soldering Iron - Adjustable Temperature Pen-Style - TS80P

PRODUCT ID: 4244

The TS80 is a chic and smart soldering iron powered by USB Type-C and QC3.0 standard input. Normally we'd scoff at trying to power a soldering...

The TS80 is a chic and smart soldering iron powered by USB Type-C and QC3.0 standard input. Normally we'd scoff at trying to power a soldering iron off of USB, but thanks to the new USB C standard, the power plug that's included is a 9V 2A so you get a reasonable ~20 Watts of power. So, this is the first USB iron we would feel comfortable stocking, its a nice iron, good enough for every-day use. We dig the slim pen iron (so comfortable...

$109.95

55 IN STOCK

Nth-Light Narrow LED Flexible Strip Light

PRODUCT ID: 3683

Here at Adafruit we never get tired of new and exotic glowing things. Like moths to the flame, we were intrigued by this new LED technology from Nth...

Here at Adafruit we never get tired of new and exotic glowing things. Like moths to the flame, we were intrigued by this new LED technology from Nth Light. Instead of having individual LEDs, Nth prints micro LED diodes onto a flexible plastic substrate for a unique look. The Nth-Light Narrow LED Flexible Strip Light is printed in three basic processes, starting with standard LED wafers. These wafers are then cut into micro LEDs the...

$18.50

1 IN STOCK

Particle Boron LTE - nRF52840 with Mesh and LTE Cellular Modem

PRODUCT ID: 3998

Woohoo, it's time for a Particle Mesh party! And the Particle Boron LTE is bringing it with a double-dose of Mesh and...

Woohoo, it's time for a Particle Mesh party! And the Particle Boron LTE is bringing it with a double-dose of Mesh and LTE Cellular - so you're covered for network connectivity, no matter where you are. The Boron LTE is a powerful LTE CAT-M1/NB1 enabled development kit that can act as either a standalone cellular endpoint or LTE enabled gateway for Particle Mesh networks. It is based on the Nordic nRF52840,...

$59.95

15 IN STOCK

Fomu - ICE40 FPGA Development Board

PRODUCT ID: 4332

Only 13mm long, Fomu really puts the micro in microprocessor. Fomu is a fully open-source, programmable FPGA device that...

Only 13mm long, Fomu really puts the micro in microprocessor. Fomu is a fully open-source, programmable FPGA device that sits inside a USB Type-A port. It has four buttons, an RGB LED, and an FPGA that is compatible with a fully open source chain and capable of running a RISC-V core. Fomu comes in a custom plastic enclosure that slots perfectly into a USB port. Fomu: has Python With 128 kilobytes of RAM and a large...

$49.95

13 IN STOCK

Particle Xenon Kit - nRF52840 with BLE and Mesh

PRODUCT ID: 3995

Warning: Particle is deprecating a Xenon / Mesh support. With a little effort these boards can be converted/reprogrammed and make for great little...

Warning: Particle is deprecating a Xenon / Mesh support. With a little effort these boards can be converted/reprogrammed and make for great little CircuitPython or Arduino-compatible boards, and but they will no longer be supported by the Particle Cloud service . Woohoo, it's time for a Particle Mesh party! And the Particle Xenon Kit is the most basic element (ha!) for your mesh network. The Xenon is a low-cost mesh-enabled development kit...

$25.00

IN STOCK

Particle Photon Starter Kit

PRODUCT ID: 2723

The Particle Photon Kit includes a Photon with headers, a shiny white half-size solderless breadboard, a USB-micro cable, and a couple of extra...

The Particle Photon Kit includes a Photon with headers, a shiny white half-size solderless breadboard, a USB-micro cable, and a couple of extra surprises (two resistors, an LED, and a photocell) to help you start building your Internet of Things projects right away. Your Particle Photon comes with access to the Particle Cloud, a free cloud service. The Particle Cloud has some great features for building connected projects, including over-the-air...

MORE INFO

DISCONTINUED

Particle Argon Kit - nRF52840 with BLE and WiFi

PRODUCT ID: 3993

Woohoo, it's time for a Particle Mesh party! And the Particle Argon is bringing it with a mix of Bluetooth Low Energy and Wi-Fi, your two most...

Woohoo, it's time for a Particle Mesh party! And the Particle Argon is bringing it with a mix of Bluetooth Low Energy and Wi-Fi, your two most favorite 2.4GHz wireless protocols. The Argon is a powerful Wi-Fi enabled development kit that can act as either a standalone Wi-Fi endpoint or Wi-Fi enabled gateway for Particle Mesh networks. It is based on the Nordic nRF52840, the BLE Cortex M4 with a ton of Flash, RAM and peripherals, including...

$35.95

9 IN STOCK

Sony Spresense Main Board - CXD5602

PRODUCT ID: 4419

SPRESENSE is a low-power board computer for the IoT that is equipped with a GPS receiver and supports High-Resolution Audio codecs. The board...

SPRESENSE is a low-power board computer for the IoT that is equipped with a GPS receiver and supports High-Resolution Audio codecs. The board allows for IoT versatility and can be developed for a vast range of uses, such as a drone utilizing the GPS and high-performance processor, a smart speaker utilizing High-Resolution Audio recording and playback as well as the built-in full-digital amplifier, or a low-power time-lapse camera utilizing...

$65.00

45 IN STOCK