Internet of Things - IoT / WIFI

Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. We do sell these on a breakout, but maybe you wanna just put this in your own project PCB....

Feather is the new development board from Adafruit, and like its namesake, it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather HUZZAH ESP8266 - our take on an 'all-in-one' ESP8266 WiFi development board with built-in USB and battery charging. It's an ESP8266 WiFi module with...

This 4" / 100mm long flexible uFL 2.4GHz antenna has approx 4DBi gain and a 50Ω impedance so it will work fantastically with just about any 2.4-2.5GHz wireless receiver/transmitter such as the Adafruit CC3000s! Antenna comes with a uFL (a.k.a u.FL / IPX / IPEX) connector, so no more need for additional adapters to get your IoT cloud flying high!

Folks love our wide selection of RGB matrices and accessories, for making custom colorful LED displays... and our RGB Matrix Shields and FeatherWings can be quickly soldered together to make the wiring much easier. But what if we made it even easier than that? Like, no solder, no wiring, just instant plug-and-play? Dream no more - with the Adafruit Matrix Portal...

Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. While this chip has been very popular, its also been very difficult to use. Most of the low...

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed, reliable WiFi with built in USB and battery charging. Its an...

Give your plain ol' microcontroller project a lift with the Adafruit AirLift - a breakout board that lets you use the powerful ESP32 as a WiFi co-processor. You probably have your favorite microcontroller (like the ATmega328 or ATSAMD51), awesome peripherals and lots of libraries. But it doesn't have WiFi built in! So lets give that chip a best friend, the ESP32....

Give your Feather project a lift with the Adafruit AirLift FeatherWing - a FeatherWing that lets you use the powerful ESP32 as a WiFi co-processor. You probably have your favorite Feather (like the Feather M4) that comes with its own set of awesome peripherals and lots of libraries. But it doesn't have WiFi built in! So lets give that chip a best friend, the ESP32....

PyPortal, our easy-to-use IoT device that allows you to create all the things for the “Internet of Things” in minutes. Make custom touch screen interface GUIs, all open-source, and Python-powered using tinyJSON / APIs to get news, stock, weather, cat photos, and more – all over Wi-Fi with the latest technologies. Create little pocket universes of...

Give your next project a lift with AirLift - our witty name for the ESP32 co-processor that graces this Metro M4. You already know about the Adafruit Metro M4 featuring the Microchip ATSAMD51, with it's 120MHz Cortex M4 with floating point support. With a train-load of FLASH and RAM, your code will be fast and roomy. And what better way to improve it than to add...

This 8"/200mm long swivel dipole antenna has 5dBi of gain and 50Ω impedance so it will work fantastically with just about any 2.4-2.5GHz wireless receiver/transmitter such as: 2.4GHz Wi-Fi (802.11b/g/n). 2.4GHz XBee. Bluetooth. Other 2.4GHz transceivers. Antenna comes with the industry standard RP-SMA connector that is found on nearly all WiFi devices. If you...

The ESP-BOX is a new generation AIoT development platform released by Espressif Systems. The ESP32-S3-BOX is an AIoT development board that is based on Espressif’s ESP32-S3 Wi-Fi + Bluetooth 5 (LE) SoC. The ESP32-S3-BOX provides a platform for developing the control of home appliances using Voice Assistance + touch screen controller, sensor, infrared...

The PyPortal Titano is the big sister to our popular PyPortal now with twice as many pixels! The PyPortal is our easy-to-use IoT device that allows you to create all the things for the “Internet of Things” in minutes. Make custom touch screen interface GUIs, all open-source, and Python-powered using tinyJSON / APIs to get news, stock, weather, cat photos,...

Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! This module contains an ESP8285, which is an ESP8266 processor with 1MB of FLASH memory already built in. You can use it just like an ESP8266, it's the same processor and WiFi The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi...

Squeeeeze down your next ESP32 project to its bare-bones essential with the Adafruit HUZZAH32 Breakout. This breakout is basically the 'big sister' of our HUZZAH 8266, but instead of an ESP8266 it has the '32! We've pared down our popular Feather ESP32, removing the battery charger and USB-serial converter. You just get a regulator, some protection diodes, two...

Home is where the heart is...it's also where we keep all our electronic bits. So why not wire it up with sensors and actuators to turn our house into an electronic wonderland. Whether it's tracking the environmental temperature and humidity in your laundry room, or notifying you when someone is detected in the kitchen, to sensing when a window was left open, or...

As of January 17, 2023 - the Boron LTE is now powered by EtherSIM, Particle's new globally available, self-optimizing SIM with no data plans or device fees. Particle's Free Plan supports up to 100 devices, cellular data, and fully-featured platform access with no time limit. Woohoo, it's time for a Particle Mesh party! And the Particle Boron LTE is bringing it with a...

Connect your Arduino to the Internet with this fine new FCC-certified WiFi module from Atmel. This 802.11bgn-capable WiFi module is the best new thing for networking your devices, with SSL support and rock solid performance - running our adafruit.io MQTT demo for a full weekend straight with no hiccups (it would have run longer but we had to go to work, so we...

The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Now get ready to take your bite-sized WiFi capabilities to the next level with the ESP32 Development Board! The development board breaks out all the module’s pins to 0.1″ headers and provides...

The ESP-WROVER-KIT from Espressif supports the most distinguishing features of the ESP32. Whether you need external SRAM for IoT applications, or an LCD+camera interface, it has you covered! The ESP-WROVER-KIT is a newly-launched development board built around ESP32. This board comes with an ESP32 module already. The version of this kit now comes with the...

This 4"/100mm long swivel dipole antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 2.4-2.5GHz wireless receiver/transmitter such as: 2.4GHz Wi-Fi (802.11b/g/n). 2.4GHz XBee. Bluetooth. Other 2.4GHz transceivers. Antenna comes with the industry standard RP-SMA connector that is found on nearly all WiFi devices. If you...

There's no place like home... and if you're like us you've spent a lot of time at home over the past year. It almost feels like a whirlwind picked us up and flew us to a strange world, and we've had to adapt to all these new customs when really we want to return to how life used to be. And, maybe, slowly, we're starting to make our way back. Until that day, we can...

Ever wanted to dabble in face and/or speech recognition? Espressif's ESP-EYE is a miniature ESP32-based development board that combines a digital microphone, ESP32 (of course) with 8 MB PSRAM and 4 MB flash, and a 2 megapixel camera. There's a few buttons and LEDs as well for basic control and configuration. Unlike some boards, this codebase does not require internet...

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed, reliable WiFi with built in USB and battery charging. Its an...

Connect your Arduino to the Internet with this fine new FCC-certified WiFi module from Atmel. This 802.11bgn-capable WiFi module is the best new thing for networking your devices, with SSL support and rock solid performance - running our adafruit.io MQTT demo for a full weekend straight with no hiccups (it would have run longer but we had to go to work, so we...

The ESP-32-based M5Stick-C is a wee, super portable, open-source IoT development board, like a fun-sized version of the M5Stack. Jam-packed with a Wi-Fi & Bluetooth powered ESP32, USB interface, Li-Poly battery and charge circuitry, 0.96" color TFT display, various sensors (IR transmitter, microphone, MPU6886 sensor) all integrated inside, buttons, and more! You...

The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Now get ready to take your bite-sized WiFi capabilities to the next level with the ESP-WROVER-32 WiFi / Bluetooth Classic / BLE Module! This modules is even more powerful than the WROOM-32 - it has a 8MB...

The ESP-BOX is a new generation AIoT development platform released by Espressif Systems. The ESP32-S3-BOX is an AIoT development board that is based on Espressif’s ESP32-S3 Wi-Fi + Bluetooth 5 (LE) SoC. The ESP32-S3-BOX provides a platform for developing the control of home appliances using Voice Assistance + touch screen controller, sensor, infrared...

NOTE: Due to stock limitations we may only be able to offer refunds or store credit for Pis that are defective, damaged or lost in transit. If you didn't think that the Raspberry Pi Zero could possibly get any better, then boy do we have a pleasant surprise for you! The new Raspberry Pi Zero W offers all the benefits of the Pi Zero v1.3, but with one big difference...

NOTE: Due to stock limitations we may only be able to offer refunds or store credit for Pis that are defective, damaged or lost in transit. The Raspberry Pi 3 Model B is the most popular Raspberry Pi computer made, and the Pi Foundation knows you can always make a good thing better! And what could make the Pi 3 better? How about a faster processor, 5 GHz WiFi, and...

The PyPortal Pynt is the little sister to our popular PyPortal - zapped with a shrink ray to take the design from a 3.2" diagonal down to 2.4" diagonal screen - but otherwise the same! The PyPortal is our easy-to-use IoT device that allows you to create all the things for the “Internet of Things” in minutes. Make custom touch screen interface GUIs, all...

The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen even when power is removed! The ESP32-S2 is great because it builds on the years of code and support for the ESP32 and also adds native USB support so you can use this board with Arduino or CircuitPython! We...

The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen even when power is removed! The ESP32-S2 is great because it builds on the years of code and support for the ESP32 and also adds native USB support so you can use this board with Arduino or CircuitPython!...

The Raspberry Pi 4 Model B is the newest Raspberry Pi computer made, and the Pi Foundation knows you can always make a good thing better! And what could make the Pi 4 better than the 3? How about a faster processor, USB 3.0 ports, and updated Gigabit Ethernet chip with PoE capability? Good guess - that's exactly what they did! The Raspberry Pi 4 is the latest product...

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed, reliable WiFi with built in USB and battery charging. Its an...

The Photon is a $19 tiny Wi-Fi development kit for creating connected projects and products for the Internet of Things. It's easy to use, it's powerful, and it's connected to the cloud. The tools that make up the Photon's ecosystem (and come along with the board) are designed to let you build and create whether you're an embedded engineer, web developer, Arduino...

Woohoo, it's time for a Particle Mesh party! And the Particle Argon is bringing it with a mix of Mesh networking and and Wi-Fi, your two most favorite 2.4GHz wireless protocols. The Argon is a powerful Wi-Fi enabled development kit that can act as either a standalone Wi-Fi endpoint or Wi-Fi enabled gateway for Particle Mesh networks. It is based on the Nordic...

NOTE: Due to stock limitations we may only be able to offer refunds or store credit for Pis that are defective, damaged or lost in transit. Raspberry Pi Zero 2 W is the latest product in Raspberry Pi's most affordable range of single-board computers. The successor to the breakthrough Raspberry Pi Zero W, Raspberry Pi Zero 2 W is a form factor–compatible drop-in...

Take your Pycom board on a journey, and it will even keep track of where you are! The Pytrack is an add-on daughterboard that will make geo-tracking projects a breeze. Not only do you get a GPS module, but also an accelerometer and micro SD card slot. This shield works with all Pycom boards (LoPy, WiPy 2, WiPy 3, etc) Features: Super accurate GNSS + Glonass GPS. 3...

Discontinued - you can grab Adafruit ESP32 Feather V2 - 8MB Flash + 2 MB PSRAM - STEMMA QT instead! Ameba RTL8722DM Mini Board (AMB 23) is a devkit for a different family of WiFi/BLE-integrated chipsets from RealTek. As more chip companies come out with their "All in One IoT" platforms, we like to stock a dev kit for folks who are interested in experimentation....

The SiPy from Pycom is a multi-network (Sigfox, WiFi and BLE) development platform. It's programmable with MicroPython and the Pymakr IDE for fast IoT application development, easy programming in-field and extra resilience with network failover. The best blend of speed to deployment and access to new LPWAN networks rolling out across Europe, USA, Africa and India....

What is the electric imp? In essence, the Imp provides an easy, integrated way to connect almost any hardware device both to other devices and to internet services. It's more than just a WiFi card, or even a WiFi module with processing built in - it's an integrated platform that deals with the drudgery of connectivity, allowing you to concentrate on the application...

The April is a handy companion for your Electric Imp card. This breakout board provides just the bare minimum for Imp life support - a socket, an ID chip, and a 3.3v buck power supply for high power efficiency. Small and cheap, it's easy to integrate into products for demos or even use in low-volume production. Dimensions: 51mm x 32mm x 6mm (without header) or 11mm...

The same team that built Roving Networks is now at ACKme, where they're designing the future of WiFi connectivity. Their first release is the ACKme WiConnect, a super-smart WiFi module that has a lot of built-in capability such as SSL, AP mode, auto-connection, etc.The AMW004-E03 ‘Mackerel’ evaluation board provides a quick and easy way to evaluate and...

This WiPy 3.0 compatible Expansion Board v3.1 brings additional functionality to your IoT project. Simply insert the WiPy 3.0 into the headers and enjoy all the extra features! This is compatible with WiPy 2.0, WiPy 3.0, LoPy, LoPy4, SiPy, FiPy and GPy! Specifications: USB and LiPo battery powered. Custom PIC USB to serial converter with automatic bootloader mode....

This Pycom Expansion Board is compatible with both the LoPy and the WiPy 2.0 and brings additional functionality to your IoT project. Simply insert the WiPy or LoPy into the headers and enjoy all the extra features! Not for use with original WiPy, for WiPy 2.0! Click here for the v1.0 WiPy adapter Specifications: USB and LiPo battery powered. FT234XD USB to serial...

Quantify the world! The Sensor Kit from Particle is a curated mix of awesome sensors and electrical components specifically selected by the engineers on the Particle Team. If you want to measure temperature, sense loudness, measure distances, capture motion, or detect noxious gases, the Sensor Kit has you covered. Whether you’re building a connected robot or...

The Particle Power Shield is the best way to—you guessed it—provide power to your mobile Particle projects. Based around the MCP73871 battery management controller, this shield allows you to simultaneously power a Photon and charge a connected Li-Ion or Li-Po battery. You'll also be able to monitor battery levels using the Photon itself, which makes the...

Discontinued - you can grab ESP32-S2 Kaluga Dev Kit featuring ESP32-S2 WROVER instead! Espressif's ESP32-S2 Human Machine Interface Dev Kit 1 (ESP32-S2-HMI-DevKit-1) has been specifically designed for human-machine interfaces in smart-home automation controllers, smart speakers with display, smart alarm clocks, etc. ESP32-S2-HMI-DevKit-1 is powered by the...

Quantify the world! The Sensor Kit from Particle is a curated mix of awesome sensors and electrical components specifically selected by the engineers on the Particle Team. If you want to measure temperature, sense loudness, measure distances, capture motion, or detect noxious gases, the Sensor Kit has you covered. Whether you’re building a connected robot or...

Discontinued - you can grab the Adafruit ESP32 Feather V2 - 8MB Flash + 2 MB PSRAM - STEMMA QT instead! Woohoo, it's time for a Particle Mesh party! And the Particle Argon is bringing it with a mix of Bluetooth Low Energy and Wi-Fi, your two most favorite 2.4GHz wireless protocols. The Argon is a powerful Wi-Fi enabled development kit that can act as either a...

The Esquilo Air is everything you'll need to make any stand-alone internet enabled devices in a matter of minutes! This new generation of WiFi boards has a built in web-based IDE - that is, its on the board itself. Yet, its got the lightweight speed of an embedded Cortex M4 processor. This complete IoT development system comes equipped with 1MB of flash, 18 PWM...

Need an easy-to-use but powerful control solution for more industrial-type projects? Get the controller that does exactly what you want in a sturdy, contained package. Combine Arduino simplicity, ESP8266 WiFi connectivity, and Digital Logger's experience and reliability to customize your own PLC for controlling industrial and robotics projects. Digital Loggers...

Discontinued - you can grab Particle Argon Kit - nRF52840 with BLE and WiFi instead! Warning: Particle is deprecating a Xenon / Mesh support. With a little effort these boards can be converted/reprogrammed and make for great little CircuitPython or Arduino-compatible boards, and but they will no longer be supported by the Particle Cloud service. Woohoo, it's time for...

Discontinued - you can grab Adafruit HUZZAH32 – ESP32 Feather Board instead! Say "Hi!" to the WICED Feather! Perfect for your next Internet connected project, with a powerful processor and WiFi core that can take anything you throw at it - this Feather is WIC(K)ED AWESOME! Feather is the new development board from Adafruit, and like its namesake it is thin,...

Discontinued - you can grab Particle Boron LTE Kit - nRF52840 with LTE Cellular Modem instead! Locate your stuff! The Asset Tracker Kit from Particle contains all of the pieces you need to build a GSM + GPS location tracker for your most prized possessions. In addition to a GPS Shield, the Asset Tracker Kit comes with a weatherproof enclosure, so it’ll keep...

Give your Pycom board feelings and senses with this fancy new Pysense shield. The Pysense is an add-on daughterboard that will make environmental sensor projects a breeze. Not only do you get a wide range of sensors but it even comes with a micro SD card holder so you can log data easily, and a battery connector with charger to take it on the go. This shield works...

For years we've seen all sorts of microcontroller-friendly WiFi modules but none of them were really Adafruit-worthy. Either they were too slow, or too difficult to use, or required signing an NDA, or had limited functionality, or too expensive, or too large. So we shied away from creating or developing a WiFi Arduino shield. NO LONGER! The CC3000 hits that sweet...

The Photon is a $19 tiny Wi-Fi development kit for creating connected projects and products for the Internet of Things. It's easy to use, it's powerful, and it's connected to the cloud. The tools that make up the Photon's ecosystem (and come along with the board) are designed to let you build and create whether you're an embedded engineer, web developer, Arduino...

Locate your stuff! The Asset Tracker Kit from Particle contains all of the pieces you need to build a Cellular + GPS location tracker for your most prized possessions. In addition to a GPS Shield, the Asset Tracker Kit comes with a weatherproof enclosure, so it’ll keep your electronics safe from the dust, dirt, and moisture of the great outdoors. Keep your...

Discontinued. Note - It is possible that this product may be put back on the site for sale. WiFi!? On an Arduino!? You shouldn't have! The MKR1010 from arduino.cc gives the functionality of the Arduino Zero with the added bonus of a WiFi chip. It's based on the low power Arm Cortex-M0 32-bit SAMD21, like in the other boards within the Arduino MKR family. The WiFi and...

For years we've seen all sorts of microcontroller-friendly WiFi modules but none of them were really Adafruit-worthy. Either they were too slow, or too difficult to use, or required signing an NDA, or had limited functionality, or too expensive, or too large. So we shied away from creating or developing a WiFi Arduino shield. NO LONGER! The CC3000 hits that sweet...

The Particle Photon Kit includes a Photon with headers, a shiny white half-size solderless breadboard, a USB-micro cable, and a couple of extra surprises (two resistors, an LED, and a photocell) to help you start building your Internet of Things projects right away. Your Particle Photon comes with access to the Particle Cloud, a free cloud service. The Particle Cloud...

The WiPy is an enterprise grade IOT development platform
 that runs Python in real time with the perfect blend of power, speed, friendliness, and flexibility. Within a few minutes you can wirelessly connect to it and get a Python REPL command line. In addition to all the hardware specs, Pycom developed powerful and intuitive Python API to take advantage of every...

Locate your stuff! The Asset Tracker Kit from Particle contains all of the pieces you need to build a Cellular + GPS location tracker for your most prized possessions. In addition to a GPS Shield, the Asset Tracker Kit comes with a weatherproof enclosure, so it’ll keep your electronics safe from the dust, dirt, and moisture of the great outdoors. Keep your...

With WiFi, BLE and cellular LTE CAT M1/NB1, the Pycom GPy is a triple-bearer MicroPython enabled micro controller - the perfect enterprise grade IoT platform for your connected Things. Create and connect your things everywhere, fast. Imagine three networks in one perfectly-formed, same-small-foot-print-as-WiPy-LoPy-FiPy-and-SiPy, IoT development board. MicroPython...

Warning: Particle is deprecating a Xenon / Mesh support. With a little effort these boards can be converted/reprogrammed and make for great little CircuitPython or Arduino-compatible boards, and but they will no longer be supported by the Particle Cloud service. Woohoo, it's time for a Particle Mesh party! And the Particle Xenon is the most basic element (ha!) for...

The Electron is a small cellular IoT board made by Particle. This tiny development kit has everything you need for creating 3G cellular connected products. Includes a prepaid, no contract data plan and instant web access to your Electron with wireless programming. Kit includes: Microcontroller. Particle SIM card with service in more than 100 countries worldwide. 3...

With so many connectivity options, Pycom's LoPy4 is a lot like an amazing, multi-course brunch. You've got LoRa playing your favorite morning public access radio station, WiFi talking to your smart coffee maker, SigFox and cream cheese on a bagel, and a baker's dozen of Bluetooth muffins-- I mean, blueberry muffins! Boosted with the Espressif ESP32 chipset, the LoPy...