Crickit - Creative Robotics

Adafruit Crickit and Circuit Playground strapped to the back of a motorized cardboard turtle

Make a robot friend with Adafruit's CRICKIT - A Creative Robotics & Interactive Construction Kit. It's an add-on to our popular Circuit Playground Express, FEATHER and other platforms to make and program robots with CircuitPython, MakeCode, and Arduino.

  • Adafruit CRICKIT for Circuit Playground Express

    Product ID: 3093
    Sometimes we wonder if robotics engineers ever watch movies. If they did, they'd know that making robots into servants always ends up in a robot rebellion. Why even go down that path? Here at Adafruit, we believe in making robots our friends! So if you find yourself wanting a companion, consider the robot. They're fun to program, and you can get creative with...
    $29.95
    In stock
  • Circuit Playground Express

    Product ID: 3333
    Circuit Playground Express is the next step towards a perfect introduction to electronics and programming. We've taken the original Circuit Playground Classic and made it even better! Not only did we pack even more sensors in, we also made it even easier to program. Start your journey with Microsoft MakeCode block-based or Javascript programming. Then, you can use...
    $24.95
    In stock
  • Medium Surface Transducer with Wires - 4 Ohm 3 Watt

    Product ID: 1785
    Turn any surface/wall/table etc into a speaker with a surface transducer. This type of speaker does not have a moving cone like most speakers you've seen. Instead, a small metal rod is wrapped with the voice coil. When current is pulsed through the coil, the magnetic field causes a piece of metal to expand and contract - and if it's pressed against a surface it turns...
    $14.95
    In stock
  • DC Toy / Hobby Motor - 130 Size

    Product ID: 711
    These are standard '130 size' DC hobby motors. They come with a wider operating range than most toy motors: from 4.5 to 9VDC instead of 1.5-4.5V. This range makes them perfect for controlling with an Adafruit Motor Shield, or with an Arduino where you are more likely to have 5 or 9V available than a high current 3V setting. They'll fit in most electronics that...
    $1.95
    In stock
  • Micro servo - TowerPro SG92R

    Product ID: 169
    Tiny little servo can rotate approximately 180 degrees (90 in each direction) and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware, or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gearbox, especially since it will fit in small...
    $5.95
    In stock
  • Small Alligator Clip Test Lead (set of 12)

    Product ID: 1008
    Connect this to that without soldering using these handy mini alligator clip test leads. 15" cables with alligator clip on each end, color coded. You get 12 pieces in 6 colors. Strong and grippy, these always come in handy! We often use these in conjunction with a multimeter so we don't have to hold the probes in place. Compared to our Large alligator clip set, these...
    $3.95
    In stock
  • Speaker - 3" Diameter - 8 Ohm 1 Watt

    Product ID: 1313
    Listen up! This 3" diameter speaker cone is the perfect addition to any audio project where you need an 8 ohm impedance and 1W or less of power. We particularly like this cone as it has 4 handy mounting tabs 60mm apart. Works great with our Wave shield or class D amplifier board. Speaker - 3" Diameter - 8 Ohm 1 Watt (0:01)
    $1.95
    In stock
  • Continuous Rotation Servo - FeeTech FS5103R

    Product ID: 154
    This servo rotates fully forward or backward instead of moving to a position. You can use any servo code, hardware, or library to control these servos. Good for making simple moving robots. Comes with four different horns, as shown. To control with an Arduino, we suggest connecting the control wire to pin 9 or 10 and using the Servo library included with the Arduino...
    $11.95
    In stock
  • Mini Metal Speaker w/ Wires - 8 ohm 0.5W

    Product ID: 1890
    Listen up! This tiny 1" diameter speaker cone is the perfect addition to any small audio project where you need an 8 Ω impedance and will be using 0.5W or less of power. We particularly like this cone as it's very simple and its metal body is extremely lightweight. It's very similar to the speaker in the Drawdio kit. Works great with our Wave shield or class D...
    $1.95
    In stock
  • Bone Conductor Transducer with Wires - 8 Ohm 1 Watt

    Product ID: 1674
    Drown out the voices in your head with a bone conduction transducer! This incredible speaker does not have a moving cone like most speakers you've seen, instead, a small metal rod is wrapped with the voice coil. When current is pulsed through the coil, the magnetic field causes a piece of metal to expand and contract - if pressed against a flat surface or cavity it...
    $8.95
    In stock
  • Speaker - 3" Diameter - 4 Ohm 3 Watt

    Product ID: 1314
    Listen up! This 3" diameter speaker cone is the perfect addition to any audio project where you need an 4 ohm impedance and 3W or less of power. We particularly like this cone as it has 4 handy mounting tabs 60mm apart. Works great with our class D amplifier board. Speaker - 3" Diameter - 4 Ohm 3 Watt (0:01)
    $1.95
    In stock
  • Wheel for Micro Continuous Rotation FS90R Servo

    Product ID: 2744
    We're keepin' it wheel with this one! Need a great drive solution for your little robotic friends? This black plastic Micro Continuos Rotation Servo Wheel is equipped with a silicone tire and a press-fit design to make connecting to your FS90R Micro Servo super quick and easy. Make cute robots today with a couple of these wheels! Continuous-rotation micro Servo not...
    $2.50
    In stock
  • Small Alligator Clip to Male Jumper Wire Bundle - 6 Pieces

    Product ID: 3448
    When working with unusual non-header-friendly surfaces, these handy cables will be your best friends! No longer will you have long, cumbersome strands of alligator clips. These compact jumper cables have a premium male header on one end and a grippy mini alligator clip on the other. Grab onto your Flora, Circuit Playground, micro:bit, Gemma, or even a banana, and...
    $3.95
    In stock
  • Copper Foil Tape with Conductive Adhesive - 6mm x 15 meter roll

    Product ID: 1128
    Copper tape can be an interesting addition to your toolbox. The tape itself is made of thin pure copper so its extremely flexible and can take on nearly any shape. You can easily solder to it, and the tape itself can carry current just like a wire. On the back is an electrically conductive adhesive. The adhesive can't carry significant current but it is very handy...
    $5.95
    In stock
  • DC Motor in Micro Servo Body

    Product ID: 2941
    This tiny DC Motor in Micro Servo Body is an interesting motor - it's the same size and shape as our micro servo but it isn't a servo. It's more like a DC motor + plastic gear-train in a box. It's not a super powerful motor, it would do well as a little robot wheel. It's also a lot less expensive than a micro servo (continuous or non-continuous) because there is no...
    $3.50
    In stock
  • DC Gearbox Motor - "TT Motor" - 200RPM - 3 to 6VDC

    Product ID: 3777
    Perhaps you've been assembling a new robot friend, adding a computer for a brain and other fun personality touches. Now the time has come to let it leave the nest and fly on its own wings– err, wheels! These durable (but affordable!) plastic gearbox motors (also known as 'TT' motors) are an easy, low-cost way to get your projects moving. This is a TT DC Gearbox...
    $2.95
    In stock
  • Standard servo - TowerPro SG-5010 - 5010

    Product ID: 155
    This high-torque standard servo can rotate approximately 180 degrees (90 in each direction). You can use any servo code, hardware, or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gearbox. Comes with 3 horns, as shown. They aren't the highest quality servo (which is why they are...
    $12.00
    In stock
  • Mono Enclosed Speaker - 3W 4 Ohm

    Product ID: 3351
    Listen up! This 2.8" x 1.2" speaker is a great addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularly like this speaker as it is small and enclosed for good audio volume and quality. It has a handy JST 2PH input cable to add audio to your displays and other projects (this connector is part of the JST-PH series which is...
    $3.95
    In stock
  • Thin Plastic Speaker w/Wires - 8 ohm 0.25W

    Product ID: 1891
    Listen up! This 1.5" diameter speaker cone is the perfect addition to any audio project where you need an 8Ω impedance and are using 0.25W of power. The speakers are rated at 0.25W, with a maximum input of 0.5W (printed wattage on back of speaker may have either value). We particularly like this cone as it's very simple and its plastic body is extremely...
    $1.75
    In stock
  • Servo Extension Cable - 50cm / 19.5" long

    Product ID: 973
    Stretch out your servo connections with this flexible servo extension cord. It has a 3 pin shrouded "male" connection to plug your servo into and then, 50cm later, a 3 pin female connection. It even keeps the common red/black/white color coding. A great add-on to our 16 channel PWM/Servo driver and goes with all the servos we carry.
    $2.50
    In stock
  • Servo Extension Cable - 30cm / 12" long -

    Product ID: 972
    Stretch out your servo connections with this flexible servo extension cord. It has a 3 pin shrouded "male" connection to plug your servo into and then, 30cm later, a 3 pin female connection. It even keeps the common red/black/white color coding. A great add-on to our 16 channel PWM/Servo driver and goes with all the servos we carry.
    $1.95
    85 in stock
  • Orange and Clear TT Motor Wheel for TT DC Gearbox Motor

    Product ID: 3766
    Usually when one needs an orange wheel it's a garnish for a cocktail, like a tasty Sidecar. And speaking of cars, this wheel is for driving, not drinking! Need a great drive solution for your little robotic friends? This Orange & Clear TT Motor Wheel is equipped with a nice, thick silicone tread and a press-fit design to make connecting super quick and easy. Make...
    $1.50
    In stock
  • Thin White Wheel for TT DC Gearbox Motors - 65mm Diameter

    Product ID: 3763
    We're keepin' it wheel with this one! Plastic gear-box motors (also known as 'TT' motors) are an easy and low cost way to get your projects moving. But we've noticed that there are not a lot of nice TT motor wheels to go along with them. This Thin White Wheel has solid heft, but it won't make your robot bulky. Despite looking a lot like our continuous rotation servo...
    $1.50
    In stock
  • Continuous Rotation Servo Wheel

    Product ID: 167
    Plastic wheel with a cutout specially designed to allow attachment to our larger continuous rotation servo. Makes it easy to get your robot rolling. Each wheel comes with a rubber tire that is quite sturdy. To attach, just remove the horn from your servo, align the splined gear, and use the small screw that came with your servo to attach permanently You'll probably...
    $2.95
    45 in stock
  • Standard Size - High Torque - Metal Gear Servo

    Product ID: 1142
    This high-torque standard servo now comes in a metal-gear flavor, for extra-high torque (10 kg*cm!) and reliability! It can rotate at least 120 degrees (60 in each direction) with a classic 1.5-2.5ms pulse, but if you can extend your pulses it can go up to about 170 degrees - it varies a bit servo-to-servo. You can use any servo code, hardware, or library to control...
    $19.95
    70 in stock
  • Skinny Wheel for TT DC Gearbox Motors

    Product ID: 3757
    Plastic gear-box motors (also known as 'TT' motors) are an easy and low cost way to get your projects moving. But we've noticed that there are not a lot of nice TT motor wheels to go along with them. This TT DC Motor Wheel is solid, but thin, so it won't make your robot bulky. It even comes in Adafruit black! Each order comes with one wheel, one silicone tire, and a...
    $2.50
    In stock
  • Mini 3-Layer Round Robot Chassis Kit - 2WD with DC Motors

    Product ID: 3244
    Does this guy look familiar? Of course it does! It's our Black, 3-Layer Round Robot Chassis Kit from AdaBox002! This kit gives you everything you need to build the shell of a 2-wheel-drive Mobile Platform Robot! You get the metal plates that make up the chassis, two DC drive motors with matching wheels, and a caster ball for balance. You'll fill in the rest with a...
    $24.95
    90 in stock
  • Mini Robot Rover Chassis Kit - 2WD with DC Motors

    Product ID: 2939
    Unleash your inner Mad Max and make your vehicle dreams a reality with the Mini Robot Rover Kit. This kit gives you everything you need to build the shell of a 2-wheel-drive Robot Rover! You get the chassis, 4-6 VDC motors and wheels. You'll fill in the rest with power supply, microcontroller or microcomputer and a dual H-bridge motor controller. We of course have...
    $24.95
    30 in stock
  • Mini Round Robot Chassis Kit - 2WD with DC Motors

    Product ID: 3216
    Unleash your inner Mad Max and make your vehicle dreams a reality with the Mini Red Round Robot Chassis Kit. This kit gives you everything you need to build the shell of a 2-wheel-drive Mobile Platform Robot! You get the metal plates that make up the chassis, two DC drive motors with matching wheels, and a caster ball for balance. You'll fill in the rest with a power...
    $19.95
    58 in stock
  • Mini Oval Speaker - 8 Ohm 1 Watt

    Product ID: 3923
    Hear the good news! This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. We particularly like this speaker as it is small and comes with nice skinny wires with a connector on the end. It has a handy "Molex PicoBlade" 1.25mm pitch 2-pin cable, which makes plugging into a board easy. Or you can cut off the...
    $1.95
    In stock
  • Circuit Playground Bluefruit - Bluetooth® Low Energy

    Product ID: 4333
    Circuit Playground Bluefruit is our third board in the Circuit Playground series, another step towards a perfect introduction to electronics and programming. We've taken the popular Circuit Playground Express and made it even better! Now the main chip is an nRF52840 microcontroller, which is not only more powerful, but also comes with Bluetooth® Low Energy...
    $24.95
    In stock
  • Plastic Micro Servo Adapter for LEGO Cross - 16mm long

    Product ID: 4252
    Who doesn't love LEGO and compatible bricks? Nobody! Except when we accidentally step on them. There are soooo many mechanical things one can make with those ubiquitous bricks, plates, gears, pulleys. Say a 13-meter high LEGO London Tower Bridge... But what do you do when you want to add LEGO-compatible bricks and parts to your servo arms and horns? This is the...
    $0.75
    In stock
  • Small Alligator Clip to Female Jumper Wire Bundle - 6 Pieces

    Product ID: 4304
    When working with unusual non-header-friendly surfaces, these handy cables will be your best friends! No longer will you have long, cumbersome strands of alligator clips. These compact jumper cables have a premium female header on one end and a grippy mini alligator clip on the other. Grab onto your Circuit Playground, micro:bit, CRICKIT, Gemma, or even a banana, and...
    $3.95
    In stock
  • Peristaltic Liquid Pump with Silicone Tubing - 5V to 6V DC Power

    Product ID: 3910
    Move fluid safely from here to there with this very nice Peristaltic Pump that works with 5V or 6V power. Unlike most liquid pumps, this is a peristaltic type - the pump squishes the silicone tubing that contains the liquid instead of impelling it directly. The upshot? The pump never touches the fluid which makes this an excellent choice for any...
    $24.95
    In stock
  • Black Multi-Hub Wheel for TT / Lego or N20 Motor - 65mm Diameter

    Product ID: 4205
    This Multi-Hub Wheel is solid, a lil' chunky, but it won't make your robot bulky. It even comes in Adafruit black! Each order comes with one wheel and two different sized hubs to make connecting super quick and easy. The hubs may come attached to the wheel with a little plastic flashing, so you'll want diagonal cutters to trim them out or you can twist them out The...
    $1.95
    76 in stock
  • micro:bit v2 Go Bundle - Batteries and USB Cable Included

    Product ID: 4834
    Meet the new BBC micro:bit v2 - Upgraded with a powerful new processor that has tons more capability and also adds more sensing with a new speaker and microphone! The latest micro:bit will fit right into your existing lessons and materials; all the existing MakeCode blocks and MicroPython code will work in the same way as they do on the original micro:bit. More...
    $19.95
    In stock
  • BBC micro:bit v2

    Product ID: 4781
    Meet the new BBC micro:bit v2 - Upgraded with a powerful new processor that has tons more capability and also adds more sensing with a new speaker and microphone! The latest micro:bit will fit right into your existing lessons and materials; all the existing MakeCode blocks and MicroPython code will work in the same way as they do on the original micro:bit. More...
    $17.95
    In stock
  • Copper Foil Sheet with Conductive Adhesive - 12" x12" Sheet

    Product ID: 4607
    Copper sheet can be an interesting addition to your toolbox. The sheet itself is made of thin pure copper so its extremely flexible and can take on nearly any shape. You can easily solder to it, and the material itself can carry current just like a wire. On the back is an electrically conductive adhesive. The adhesive can't carry significant current but it is very...
    $4.95
    57 in stock
  • Small Alligator Clip Test Lead (set of 6)

    Product ID: 4100
    Connect this to that without soldering using these small alligator clip test leads. 18" long cables with color-coded alligator clips on both ends. You get 6 pieces in 6 unique colors. Strong and grippy, these always come in handy! We often use these in conjunction with a multimeter so we don't have to hold the probes in place. Compared to our large alligator clip...
    $2.95
    In stock
  • Micro Servo with Alligator Clips

    Product ID: 5592
    This servo is just like our classic Micro Servo but has 3 alligator clip test leads at the end! This makes it perfect for plug-and-play support with any of our boards with alligator-clip-friendly input/output pins, like the Circuit Playground Express, Clue, and micro:bit! So you can just 'gator right into the connector and get twistin' This tiny little servo can...
    $7.95
    In stock
  • TT Motor Bi-Metal Gearbox Double Sided Axle and 1:90 Gear Ratio

    Product ID: 5857
    These durable (but affordable!) gearbox motors (also known as 'TT' motors) are an easy, low-cost way to get your projects moving. This is a TT DC Bi-Metal Gearbox Motor with a gear ratio of 1:90, about double the 'standard' 1:48 ratio. That gives them higher torque but slower rotational speed. Since they're slower, they're good for robots where strength is more...
    $5.50
    6 in stock
  • Adafruit CRICKIT for micro:bit

    Product ID: 3928
    Sometimes we wonder if robotics engineers ever watch movies. If they did, they'd know that making robots into servants always ends up in a robot rebellion. Why even go down that path? Here at Adafruit, we believe in making robots our friends! So if you find yourself wanting a companion, consider the robot. They're fun to program, and you can get creative with...
    $29.95
    In stock
  • CD DVD Spindle Motor

    Product ID: 3882
    What's this? A record player for ants?? Not at all! This is a DVD/CD Spindle Motor, that thing that's inside a CD or DVD player, that turns the disc around really fast. These motors have some great benefits that make them easier to use than '130' style DC hobby motors For one, they're mostly flat on the end, so you can tape or glue it to a flat surface easily.They...
    $1.95
    In stock
  • Adafruit CRICKIT HAT for Raspberry Pi

    Product ID: 3957
    Sometimes we wonder if robotics engineers ever watch movies. If they did, they'd know that making robots into servants always ends up in a robot rebellion. Why even go down that path? Here at Adafruit, we believe in making robots our friends! So if you find yourself wanting a companion, consider the robot. They're fun to program, and you can get creative with...
    $34.95
    In stock
  • Rotating Door Lock DC Motor

    Product ID: 3881
    Adding to our collection of somewhat specialized motors, this Rotating Door Lock Motor is a DC Gearbox motor with a little pocket that is intended for a door lock mechanism. The motor only turns 90 degrees clockwise or counter-clockwise and will stall (but not strip) if you try to keep running it past the angle. It's geared down so it has high torque, but that also...
    $2.50
    15 in stock
  • micro:bit v2.2 Go Club 10-Pack - Batteries and USB Cables Include

    Product ID: 4833
    Meet the new BBC micro:bit v2 - Upgraded with a powerful new processor that has tons more capability and also adds more sensing with a new speaker and microphone! The latest micro:bit will fit right into your existing lessons and materials; all the existing MakeCode blocks and MicroPython code will work in the same way as they do on the original micro:bit. More...
    $199.95
    In stock
  • Micro Servo Arm and Horn Set

    Product ID: 4251
    If you bought a servo from us you probably got a bunch of plastic add-ons that you can snap onto the rotating part of the servo. These are called 'servo horns'. For many robotics projects you'll end up drilling or gluing to the horns to attach it to your armatures. But maybe you messed up, or you want to recycle the expensive motor part? This product comes with just...
    $1.25
    57 in stock
  • Paddle Wheel Pack for TT Gearbox Motor

    Product ID: 3864
    Need a great drive solution or a pop of color for your little robotic friends? This TT Motor Paddle Wheel Pack offers 3 fun, candy-colored wheels with a press-fit design to make connecting super quick and easy. While they seem to be designed for some sort of water-wheel configuration, we like them because they fit securely on TT motor axles and provide a ton of...
    $1.95
    In stock
  • Adafruit CRICKIT FeatherWing for any Feather

    Product ID: 3343
    Sometimes we wonder if robotics engineers ever watch movies. If they did, they'd know that making robots into servants always ends up in a robot rebellion. Why even go down that path? Here at Adafruit, we believe in making robots our friends! So if you find yourself wanting a companion, consider the robot. They're fun to program, and you can get creative with...
    $29.95
    16 in stock
  • Shrouded Servo to Premium Male Jumper Wires Cable - 17cm long

    Product ID: 5515
    Stretch out your servo connections with this flexible servo to premium male header jumper cable. It has a 3-pin shrouded "male" connector to plug the servo into and then, 17cm later, three separated jumper wire ends that plug into a breadboard or some header. It's excellent for when you want to quickly and easily connect a servo to an existing dev board with sockets,...
    $0.95
    In stock
  • Continuous Rotation Micro Servo - FS90R

    Product ID: 2442
    Need to make a tiny robot? This little micro servo rotates 360 degrees fully forward or backward, instead of moving to a single position. You can use any servo code, hardware, or library to control these servos. Good for making simple moving robots. Comes with five horns and attachment screws, as shown. Good for beginners who want to make stuff move without building...
    $7.50
    Out of stock
  • Micro Servo - MG90D High Torque Metal Gear

    Product ID: 1143
    Add more power to your robot with this metal-geared MG90D servo. The tiny little servo can rotate approximately 90 degrees (45 in each direction) and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware, or library to control these servos. Good for beginners who want to make stuff move without building a motor controller...
    $9.95
    Out of stock
  • Micro Servo - High Powered, High Torque Metal Gear - TowerPro MG92B

    Product ID: 2307
    Add even more power to your robot with this metal-geared servo. The tiny little servo can rotate approximately 180 degrees (~90 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor...
    $11.95
    Out of stock
  • Copper Foil Tape with Conductive Adhesive - 25mm x 15 meter roll

    Product ID: 1127
    Copper tape can be an interesting addition to your toolbox. The tape itself is made of thin pure copper so its extremely flexible and can take on nearly any shape. You can easily solder to it, and the tape itself can carry current just like a wire. On the back is an electrically conductive adhesive. The adhesive can't carry significant current but it is very handy...
    $19.95
    Out of stock
  • Speaker - 40mm Diameter - 4 Ohm 5 Watt

    Product ID: 3968
    Hear the good news! This speaker is a great addition to any audio project where you need a 4 Ohm impedance and 3W or less of power. At 40mm diameter it has a more square-ish shape, but a smaller face. Sound quality and volume are nicely sandwiched between our Thin Plastic Speaker with Wires and the honkin' 20W 4 Ohm Full Range Speaker.
    $4.95
    Out of stock
  • Standard Servo Arm and Horn Set - 25 Spline

    Product ID: 4250
    If you bought a servo from us you probably got a bunch of plastic add-ons that you can snap onto the rotating part of the servo. These are called 'servo horns'. For many robotics projects you'll end up drilling or gluing to the horns to attach it to your armatures. But maybe you messed up, or you want to recycle the expensive motor part? This product comes with just...
    $2.50
    Out of stock
  • Circuit Playground Express - Black Girls CODE

    Product ID: 2599
    Circuit Playground Express is the next step towards a perfect introduction to electronics and programming. We've taken the original Circuit Playground Classic and made it even better! Not only did we pack even more sensors in, we also made it even easier to program. Start your journey with Microsoft MakeCode block-based or Javascript programming. Then, you can use...
    Coming soon
  • Purple Aluminum Chassis for TT Motors - 2WD

    Product ID: 3796
    This royal undercarriage is made for the most noble, born in the purple robots! This Aluminum Chassis in Blinka purple makes for an excellent robot body. It's a single piece of bent 2mm thick aluminum, with a variety of holes, slots and cutouts for mounting boards, sensors, and servos. The sides are notched to fit two DC Gear 'TT' motors perfectly - you'll want to...
    $14.95
    5 in stock
  • Mono Enclosed Speaker - 1W 8 Ohm

    Product ID: 5986
    Listen up! This 2.8" x 1.2" speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. We particularly like this speaker as it is small and enclosed for good audio volume and quality. It has a handy JST 2PH input cable to add audio to your displays and other projects (this connector is part of the JST-PH series which is...
    $3.95
    In stock
  • Bare Conductive Paint Pen - 10mL

    Product ID: 1306
    Bare Conductive Paint is a multipurpose electrically conductive material perfect for all of your DIY projects! Bare Paint is water based, nontoxic and dries at room temperature. Bare Paint is the first non-toxic electrically conductive paint available to consumers today. This unique child-friendly material is designed for people of all ages to explore and learn about...
    No longer stocked
  • Bare Conductive Paint - 50mL

    Product ID: 1305
    Bare Conductive Paint is a multipurpose electrically conductive material perfect for all of your DIY projects! Bare Paint is water based, nontoxic and dries at room temperature. Bare Paint is the first non-toxic electrically conductive paint available to consumers today. This unique child-friendly material is designed for people of all ages to explore and learn about...
    No longer stocked
  • Kitronik Inventor's Kit for the BBC micro:bit - micro:bit Not Included

    Product ID: 4670
    The Kitronik Inventor's Kit for the BBC micro:bit provides a fantastic way of learning how to construct electronic circuits and create code. The BBC micro:bit has a selection of pins that are located on the bottom edge of its PCB. By using Kitronik's specially designed 'edge' connector board in conjunction with the breadboard, it is easy to use these pins to connect...
    No longer stocked
  • Crazy Circuits Bit Board Kit - Makes micro:bit LEGO® compatible

    Product ID: 4887
    Welcome to the world of programming and automation with the BBC micro:bit. The Crazy Circuits Bit Board Kit from Brown Dog Gadgets sets you up with everything you need to start making in minutes! The Bit Board lets makers combine micro:bit and bricks together to create all sorts of amazing projects. No soldering is required, it brings the ease and joy of crafting to...
    No longer stocked
  • AdaBox008 - Octo Crickit #MakeRobotFriend

    Product ID: 3906
    Sometimes we wonder if robotics engineers ever watch movies. If they did, they'd know that making robots into servants always ends up in a robot rebellion. Why even go down that path? Here at Adafruit we believe in making robots our friends! This AdaBox008 is based around CRICKIT a Creative Robotics and Interactive Creations tool KIT. When paired with motors, servos,...
    No longer stocked
  • BBC micro:bit

    Product ID: 3530
    The British Invasion is here! No, not music...microcontrollers! New to the USA is the newest and easiest way to learn programming and electronics - the BBC micro:bit. Designed specifically for kids and beginners, the micro:bit is a pocket-sized computer that you can code, customize and control to bring your digital ideas, games and apps to life. It’s a small,...
    No longer stocked
  • BBC micro:bit Go Bundle

    Product ID: 3362
    Discontinued - you can grab micro:bit v2 Go Bundle - Batteries and USB Cable Included instead! The British Invasion is here! No, not music...microcontrollers! New to the USA is the newest and easiest way to learn programming and electronics - the BBC micro:bit. Designed specifically for kids and beginners, the micro:bit is a pocket-sized computer that you can code,...
    No longer stocked
  • Colorful Clips - Tropical Alligator Test Clip Leads - 10 Pieces - 13" long

    Product ID: 5152
    Designed by Making & Hacking extraordinaire Lee Cyborg, these colorful clips are a nice switch-up from the standard colors. Connect this to that without soldering using these Hot GitHub Summer alligator clip test leads that look perfect for a beachfront environmental-sensing project. 13" long cables with alligator clips on each end, color-coded. You get 10 pieces...
    No longer stocked
  • Standard Size Ultra High Torque Servo - TowerPro MG959

    Product ID: 5298
    This ultra high-torque standard servo can rotate approximately 90 degrees and is the most powerful servo we stock. You can use any servo code, hardware, or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gearbox. Comes with 4 horns as shown. To control with an Arduino, we suggest...
    No longer stocked
  • Circuit Playground Express for 4-H

    Product ID: 4180
    Circuit Playground Express is the next step towards a perfect introduction to electronics and programming. We've taken the original Circuit Playground Classic and made it even better! Not only did we pack even more sensors in, we also made it even easier to program. This version is 4-H themed, for use by anyone, but comes in a special green color and with the 4-H...
    No longer stocked
  • DYNAMIXEL Motor - AX-12A

    Product ID: 4768
    For advanced robotics projects, a simple hobby servo motor won't have the repeatability and control you need. When a better class of servo motor is required, folks have always turned to DYNAMIXEL motors! The DYNAMIXEL is a smart actuator system developed to be the exclusive connecting joints on a robot or mechanical structure. DYNAMIXELS’ are designed to be...
    No longer stocked