Internet of Things - IoT / Packs

If you missed out on AdaBox016, it's not too late for you to pick up the parts necessary to build many of the projects! It doesn't come with tissue paper or the nifty extras, but it does have all the electronic goodies you need. This contains the essentials from AdaBox016 a.k.a The Adabox Halloween Pixel Show - check out all the learning guide project ideas here. And is perfect for constructing our MatrixPortal projects. There...

If you're building an IoT project and need to send data back-and-forth, the WiFi module built into newer Pi's should be fine for most cases. But, what if you find WiFi does not have the long-range you need? If you're deploying your project somewhere more remotely, without WiFi or a strong cellular network, like a rural area, you'll need another option. Something that can be deployed quickly with no overhead setup and that will...

If you missed out on ADABOX 014, its not too late for you to pick up the parts necessary to build many of the projects! This kit pack doesn't come with tissue paper or the nifty extras, but it does have all the electronic goodies you need This project pack features the  Circuit Playground Bluefruit  with Bluetooth LE support so now we can make our projects wireless! We've also included a colorful 'TFT Gizmo' graphical...

In collaboration with Microsoft, Adafruit's releasing IoT Starter Kits with boards, sensors, and components that are 'Azure Certified for IoT.' Azure is Microsoft's cloud solution for IoT projects that's a comprehensive and flexible program from the Microsoft team that they're extending into the open source hardware world.  This starter kit includes a pre-soldered Adafruit Feather HUZZAH...

OK you've signed up for Adafruit.io and you're ready to build something cool and Internet-connected. All you need is this starter kit which will get you going with lots of parts that go very well with our service and are the most common sensors and actuators you may want. Sense light, motion, humidity, temperature, and more, then send it for storage on adafruit.io! Light up LEDs, make noise, and move a motor when a trigger is detected....

The ATOM Matrix , at only 24 x 24mm, is the most compact development board in the M5Stack development kit series. The fits-in-your-change-pocket size computer contains a ESP32-PICO-D4 chip, which comes integrated with WiFi, Bluetooth, and 4MB of integrated SPI flash memory. All this along with its bitty form factor, it also provides more GPIO pins, making it ideal for embedded device development. The ATOM provides an infrared LED...

In collaboration with Google and Mongoose OS, Adafruit's releasing an IoT Core Pack based around our Feather HUZZAH32! This kit includes a pre-soldered  Adafruit Feather HUZZAH with ESP32 WiFi and some sensors and components to get you started on your IoT journey. Feather is a development board from Adafruit that, like its namesake, is thin, light and lets you fly.  We designed Feather to be a new standard for portable...

SPRESENSE  is a low-power board computer for the IoT that is equipped with a GPS receiver and supports High-Resolution Audio codecs. The board allows for IoT versatility and can be developed for a vast range of uses, such as a drone utilizing the GPS and high-performance processor, a smart speaker utilizing High-Resolution Audio recording and playback as well as the built-in full-digital amplifier, or a low-power time-lapse camera utilizing...

The Microsoft Internet of Things Pack for Raspberry Pi 3 is the best way to get started using Windows 10 and your Raspberry Pi as an IoT enabled device. A collaboration between Microsoft's IoT division and Adafruit, this pack's the best way to get started using both Windows 10 on your Pi and to start doing some popular projects with the internet of things. Check out windowsondevices.com for more information on how to set up...

The Arm-based Internet of Things Pack for Raspberry Pi 3 is another great addition to our family of IoT packs. If you want to start using your Raspberry Pi as an IoT-enabled device, then this kit is for you. You might not know it, but Arm-based chips are everywhere . From mobile devices to supercomputer, from medical instruments to agricultural sensors, and from base stations to servers; Arm technologies each 80% of the global...

Gotta say - this new Pi 3 is fly.  All the cool kids are going to have it - but all the coolest kids are also going to have a big pack of super cool accessories. We've hand chosen these accessories as the perfect accompaniment to your new Raspberry Pi 3 - Model B.  It's everything you need to get going with a high quality power supply, Raspbian 8G NOOBs SD card (newly updated to work on the Pi 3), lovely case, handy...

Welcome to the Internet of Things with Google! Whether you are a device creator prototyping a new design for production, or a hobbyist looking for an introduction to the Android Things API, you've come to the right place. It's time to get your Android enabled hardware working with Google services! Android Things is an Android-based OS that supports new embedded single board computer like the Raspberry Pi 3 and introduces a new set of...

The Microsoft Internet of Things Pack for Raspberry Pi 3  is the best way to get started using Windows 10 and your Raspberry Pi as an IoT enabled device. A collaboration between Microsoft's IoT division and Adafruit, this pack's the best way to get started using both Windows 10 on your Pi and to start doing some popular projects with the internet of things. Check...

Get yourself a kit that can do it all! The M5Stack FACES Pocket Computer is a ESP32-based 3-in-1 pack with swappable keyboard / Gaming / calculator panels! Each panel can be upgraded through downloading firmware updates. This open source kit is based on the ESP32 WiFi microcontroller and is compatible with MicroPython and Arduino. It comes jam-packed with Wi-Fi / Bluetooth capability, running at 240 MHz with the dual-core processor and 4MB of...

Get yourself a kit that can do it all! The M5Stack Basic Development Kit is a ESP32-based WiFi microcontroller that's compatible with MicroPython and Arduino. It comes jam-packed with Wi-Fi / Bluetooth capability, running at 240 MHz with the dual-core processor and 4MB of SPI Flash. Perfect for people who want to make advanced ESP32 projects with a display, user interface, speaker, and a couple buttons. It's super easy to snap in other...

Get yourself a kit that can do it all! The  M5Stack Gray Development Kit  is a ESP32-based WiFi microcontroller that's compatible with MicroPython and Arduino. It comes jam-packed with Wi-Fi / Bluetooth capability, running at 240 MHz with the dual-core processor and 4MB of SPI Flash. Perfect for people who want to make advanced ESP32 projects with a display, user interface, speaker, and a couple buttons. It's super easy to snap...

In collaboration with Microsoft and Hackster.io, Adafruit's releasing a Virtual IoT pack with boards, sensors, and quite a number of components! This kit is specifically curated for IoT Virtual Bootcamp hosted by Microsoft and Hackster.io in partnership with Adafruit. This kit includes a pre-soldered  Adafruit Feather HUZZAH with ESP8266 WiFi and some sensors and components to get you started on your IoT journey.  ...

The Arm-based Internet of Things Pack for Raspberry Pi 3 is another great addition to our family of IoT packs. If you want to start using your Raspberry Pi as an IoT-enabled device, then this kit is for you. You might not know it, but Arm-based chips are everywhere . From mobile devices to supercomputer, from medical instruments to agricultural sensors, and from base stations to servers; Arm technologies each 80% of the global...

The Arm-based Internet of Things Pack for Raspberry Pi 3 is another great addition to our family of IoT packs. If you want to start using your Raspberry Pi as an IoT-enabled device, then this kit is for you. You might not know it, but Arm-based chips are everywhere . From mobile devices to supercomputer, from medical instruments to agricultural sensors, and from base stations to servers; Arm technologies each 80% of the global...

What do you get when you combine the BBC's Doctor Who with an open-source hand-shaped mini-computer? The HiFive Inventor Coding Kit : A Wi-Fi-and-Bluetooth-enabled Internet of Things learning platform for young engineers! The HiFive Inventor is a visually stunning IoT-enabled hand-shaped mini-computer designed to teach young engineers how to control robots, interface with IoT systems, or build their own sonic screwdriver to...

Ever wanted your own Linux-based IoT computer? A small one, that can be battery powered? The Onion Omega2 is sort of in-between a microcontroller (like an Arduino/CircuitPython/MakeCode running chip) and a full-fledged microcomputer (like Raspbery Pi). What you get is a bite-sized development board that combines the power-efficiency of the Arduino and the flexibility of the Raspberry Pi! So, for example, it runs Linux, but isn't going to...

Ever wanted your own Linux-based IoT computer? A small one, that can be battery powered? The Onion Omega2 is sort of in-between a microcontroller (like an Arduino/CircuitPython/MakeCode running chip) and a full-fledged microcomputer (like Raspbery Pi). What you get is a bite-sized development board that combines the power-efficiency of the Arduino and the flexibility of the Raspberry Pi! So, for example, it runs Linux, but isn't going to...

In collaboration with Microsoft and Hackster.io, Adafruit's releasing a Virtual IoT pack with boards, sensors, and quite a number of components! This kit is specifically curated for IoT Virtual Bootcamp hosted by Microsoft and Hackster.io in partnership with Adafruit. This kit includes a pre-soldered  Adafruit Feather HUZZAH with ESP8266 WiFi and some sensors and components to get you started on your IoT journey.  ...

In collaboration with Microsoft, Adafruit's releasing IoT Starter Kits with boards, sensors, and components that are 'Azure Certified for IoT.' Azure is Microsoft's cloud solution for IoT projects.  Azure is a comprehensive and flexible program from the Microsoft team that they're extending into the open source hardware world.  This starter kit includes a pre-soldered Adafruit Feather M0 WiFi with stacking...

In collaboration with Microsoft and Hackster.io, Adafruit's releasing a Virtual IoT pack with boards, sensors, and quite a number of components! This kit is specifically curated for IoT Virtual Bootcamp hosted by Microsoft and Hackster.io in partnership with Adafruit. This kit includes a pre-soldered  Adafruit Feather HUZZAH with ESP8266 WiFi and some sensors and components to get you started on your IoT journey.  ...

So maybe it's not "back to school" season any more - but here at Adafruit, we like to think that it's always a good time to learn something new, which we guess means that everywhere we go is a proverbial school that we're perpetually going back to.  To celebrate the continual season, we partnered with our good friends at Arrow Electronics to release custom packs of goodies called Arrow Presents: Back to School...

I was hacking in the lab quite late one night - soldering pins and debugging the bytes When suddenly a bang exploded with sparks, and a figure emerged from the hazy dark! (It wore a mask) It wore a monster mask! (The monster mask) Its eyes were LCD glass (It wore a mask) It had some chips on the back (The monster mask) And a sweet solder mask This Halloween you will be the spookiest in town thanks to ADABOX 13! Cat eyes, or monster...

AdaBox003 – The World of IoT (Curated by Digi-Key) is the perfect gift for folks who are just getting started in the world of DIY electronics. It's an excellent introduction to our wide world of the Internet of Things and a great way to test the waters of AdaBox before committing to a subscription. Please note! This is NOT the subscription version of AdaBox! This is ONLY AdaBox003 that shipped out to...

It’s beginning to look like Ada-BOX-mas Everywhere you go Let all your ideas flow, for projects you want to show With buttons and LEDs all aglow Exactly two years ago, Adafruit released ADABOX 006 featuring the Circuit Playground Express and CircuitPython. It was a revolution in how to program electronics, and our first attempt at seeing how ADABOXians would adapt to the transition from Arduino-programmed boxes. And it was a hit! People...

Discontinued - you can grab  Huzzah! Adafruit.io Internet of Things Feather ESP8266 - WiFi Starter Kit instead!    Automate your own adorable, IoT-enabled papier-mâché house. The small size of this build lets us explore wiring, user interaction, and firmware deployment without having to get a ladder out. After building this project, you can re-purpose this project for your home or apartment. We've...

Reach out beyond your desk - to the stars and beyond - with PyPortal ! This ADABOX features a new, easy-to-use IoT device that allows you to customize and create your very own "Internet of Things" portal. We take CircuitPython to the max, pairing a SAMD51 chip with a 3.2" color TFT touchscreen and secure Wi-Fi co-processor.  With the open-source Python-powered PyPortal, you can fetch and display anything in the world:...